Features
Chelsea 281 Series hot-shift PTO, 10-bolt mounting for Allison automatic transmissions
Ductile iron bearing cap rated 117% stronger than gray iron
O-ring sealing configuration between housing and bearing cap reduces vibrational effects and improves clamp load
Enhanced clutch pack with steel discs 80% thicker than 280 Series predecessor
Nine speed ratios including low and high speeds; single continuous duty torque rating
Wet spline lubrication option provides 7 to 10 times greater shaft life
SmartStart reduces start-up shock load; Electronic Overspeed Control (EOC) protects driven equipment
Rotatable cast-iron flanges reduce pump clearance interference; positive stop for driveline outputs eliminates oil seal damage
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: Hydraulic (Hot Shift / PowerShift)
- Compatible Transmission: Allison automatic transmissions (10-bolt aperture)
- Continuous Torque Rating (Series): 390 lb-ft (529 Nm)
- Speed Ratios: Nine, including low and high
- Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Lubrication Option: Wet Spline (W) or Pressure Lube (P)
- Continuous Operation: Yes
- Output Shaft Options: SAE B (7/8 in. - 13T) Pump Spline, SAE C (1-1/4 in. - 14T) Pump Spline, 1-1/4 in. Round Shaft with 5/16 in. Key (SmartStart), 3/4 in. - 11T Pump Spline, 1410 Companion Flange
- Typical Markets: Fire and Rescue, Refuse, Truck Cranes, Pumper Cleaner
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

