Features
Hydraulic (PowerShift) hot-shift operation - designed for 10-bolt automatic transmission apertures including Allison and Caterpillar
Ductile iron bearing cap - 117% stronger than gray iron for improved durability
O-ring sealing configuration between housing and bearing cap - improves clamp load and resists vibrational effects
Enhanced clutch pack - steel discs increased 80% in thickness to resist premature tooth wear
Nine speed ratios including low and high speeds; continuous torque rating of 390 lb-ft (529 Nm)
Wet Spline Lubrication option provides 7 to 10 times greater shaft life; SmartStart reduces engagement shock load; Electronic Overspeed Control (EOC) protects driven equipment
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: PowerShift (Hydraulic Hot-Shift)
- Continuous Torque: 390 lb-ft (529 Nm)
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 37 HP at 500 RPM / 74 HP at 1000 RPM (28 kW at 500 RPM / 55 kW at 1000 RPM)
- Speed Ratios: Nine (including low and high)
- Transmission Compatibility: Allison and Caterpillar (10-bolt aperture)
- Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Lubrication: Pressure Lube or Wet Spline options
- Continuous Operation: Yes
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

