The Chelsea 489 Series Power Take-Off Assembly, part number 489GLITX-A3GH or 489GLITXA3GH, mounts directly to an 8-bolt transmission opening on most manual transmissions including Eaton Fuller, Volvo/Mack, and Tremec. The one-piece cast iron housing eliminates the need for an adapter plate, reducing potential leak paths versus a two-piece design. Intermittent torque capacity for this series is 201-300 lb-ft (301-400 Nm), with shaft power rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. The SAE B 2-bolt flange output accommodates a wide range of pump configurations. Internal parts are common to the Chelsea 442 Series, simplifying service and parts sourcing. Call us to confirm proper fit for your specific transmission and application.

The Chelsea 489 Series is suited for aerial equipment, vocational and municipal trucks, utility trucks, dump trucks, and snow and ice removal vehicles. The series offers 27 output options including a 360-degree rotatable flange with greaseable shaft to reduce pump shaft spline fretting and corrosion. Eleven internal speed ratios and multiple shift configurations make this a versatile unit across a range of manual transmission platforms. For service documentation, refer to the 489 Series Parts List (HY25-2442-M1_US) and Chelsea Service Manual (HY25-6489-M1/US).
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening without an adapter plate
Air shift actuation
Greaseable SAE B 2-bolt flange with a 1" 15-tooth SAE BB shaft
Intermittent torque rating: 201-300 lb-ft (301-400 Nm) for the 489 Series
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Internal parts common to Chelsea 442 Series for simplified servicing
Greaseable output options available to reduce pump shaft spline wear and corrosion
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt
- Mounting Option: Standard Mount with Metric Studs (G)
- Gear Ratio Code: L (25/34)
- Input Gear Designator: IT
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: Greaseable SAE B 2-Bolt Flange, SAE BB Shaft (1" 15T) (GH)
- Intermittent Torque: 201-300 lb-ft (301-400 Nm) - check application pages for actual torque ratings
- Continuous Torque: De-rate intermittent torque rating by 30% - check application pages for actual torque ratings
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (500 RPM) / 48 HP (1,000 RPM) | 18 kW (500 RPM) / 36 kW (1,000 RPM)
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
- Lubricant Type: X = No Pressure Lube, P = Pressure Lube
Additional Information

The Chelsea 489 Series is suited for aerial equipment, vocational and municipal trucks, utility trucks, dump trucks, and snow and ice removal vehicles. The series offers 27 output options including a 360-degree rotatable flange with greaseable shaft to reduce pump shaft spline fretting and corrosion. Eleven internal speed ratios and multiple shift configurations make this a versatile unit across a range of manual transmission platforms. For service documentation, refer to the 489 Series Parts List (HY25-2442-M1_US) and Chelsea Service Manual (HY25-6489-M1/US).
