The Chelsea 489 Series Power Take-Off, part number 489GLITX-P3XK or 489GLITXP3XK, mounts directly to an 8-bolt transmission opening on most manual transmissions including Eaton Fuller, Volvo/Mack, and Tremec platforms. The one-piece cast iron housing eliminates the need for an adapter plate, removing a potential leak path at the mounting face. This unit uses a wire/cable mechanical shift and carries an intermittent torque rating of 201-300 lb-ft for the series, with shaft power output of 24 HP at 500 RPM and 48 HP at 1,000 RPM. The output shaft is a 1-1/4" round with keyway. Internal parts are common to the Chelsea 442 Series, and strong tapered bearings replace needle bearings for increased load capacity. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to the transmission, no adapter plate required
Wire/cable mechanical shift; Electric over Air shift option also available in this series
Intermittent torque rating: 201-300 lb-ft (301-400 Nm) series-rated; shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
1-1/4" round output shaft with keyway; greaseable output options to reduce spline fretting and corrosion
Internal parts common to the Chelsea 442 Series for simplified parts sourcing and service
Kit-style design simplifies field service; tapered bearings replace needle bearings for greater load capacity
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt (direct to transmission, no adapter plate)
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round with Keyway
- INTERMITTENT TORQUE: 201-300 lb-ft / 301-400 Nm (check application pages for actual torque ratings)
- SHAFT POWER: 24 HP at 500 RPM, 48 HP at 1,000 RPM (18 kW at 500 RPM, 36 kW at 1,000 RPM)
- OUTPUT POWER: 46-55 HP / 31-40 kW
- LUBRICANT: P = Pressure Lube (as indicated by "P" in model code)
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
Additional Information
