The Chelsea 489GSAHX-V3GH or 489GSAHXV3GH is a 489 Series Power Take-Off assembly built for manual transmissions with an 8-bolt PTO mounting aperture, including Eaton/Fuller, Volvo/Mack, and Tremec. The one-piece cast iron housing bolts directly to the transmission opening without an adapter plate, reducing potential leak paths. This unit uses a wire/cable mechanical shift and delivers shaft power of 24 HP at 500 RPM and 48 HP at 1,000 RPM, with an intermittent torque rating of 201-300 lb-ft for the series. The output shaft is a 1-1/4" round configuration. Strong tapered bearings replace needle bearings for greater load capacity. Internal parts are common to the Chelsea 442 Series, and the kit-style design simplifies service. Call us to confirm proper fit for your application.
Features
8-Bolt integral cast iron housing mounts directly to the transmission opening without an adapter plate
Wire/cable mechanical shift with electric over air shift option available in the 489 Series
Series intermittent torque rating: 201-300 lb-ft (301-400 Nm)
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
1-1/4" round output shaft; greaseable output options available
Kit-style design with internal parts common to the Chelsea 442 Series for easier service
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt (integral one-piece cast iron housing, no adapter plate required)
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round / 1-1/4" Round with Key
- SERIES INTERMITTENT TORQUE: 201-300 lb-ft (301-400 Nm) - check application pages for actual torque rating
- SERIES OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (500 RPM), 48 HP (1,000 RPM) / 18 kW (500 RPM), 36 kW (1,000 RPM)
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, Tremec, and other manual transmissions with 8-bolt aperture
- LUBRICANT: X = No Pressure Lube, P = Pressure Lube
Additional Information
