The Chelsea 489 Series Power Take-Off Assembly, part number 489XSAHX-A3RB or 489XSAHXA3RB, mounts directly to 8-bolt transmission openings on Eaton/Fuller, Volvo/Mack, Tremec, and other compatible manual transmissions. The one-piece cast iron housing eliminates the need for an adapter plate, reducing potential leak paths and installation time. The 489 Series delivers up to 250 lb-ft intermittent torque and 48 HP at 1,000 RPM. Air shift is standard on this configuration. Tapered bearings replace needle bearings for greater load capacity. Internal parts are shared with the Chelsea 442 Series, making service straightforward. Call us to confirm proper fit for your application.
Features
8-Bolt one-piece cast iron housing mounts directly to transmission without an adapter plate
Air shift configuration
250 lb-ft intermittent torque capacity; 48 HP at 1,000 RPM shaft power
Rotatable SAE B 4-bolt flange with a 7/8" 13-tooth SAE B shaft
Tapered bearings for greater load-bearing capability over needle-bearing designs
Internal parts common to Chelsea 442 Series simplify service and parts sourcing
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt
- Mounting Option: Standard Mount (X)
- Gear Ratio Code: S (24/22)
- Input Gear Designator: AH
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: Rotatable SAE B 4-Bolt Flange, SAE B Shaft (7/8" 13T) (RB)
- Intermittent Torque: 250 lb-ft (339 Nm) - Check Application Pages for Actual Torque Ratings
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1,000 RPM
- Transmission Manufacturer: Eaton/Fuller, Volvo/Mack, Other compatible 8-bolt manual transmissions
- Dimensions: 8.38" H x 10.38" W x 14.25" L
Additional Information
Equivalent PTOs:
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

