The Chelsea 541 Series Power Take-Off Assembly, part number 541-MBDAXV or 541MBDAXV, mounts on the rear countershaft of Eaton Fuller transmissions including the Advantage and UltraShift Series. Shift type is lever/mechanical, and the output shaft is a 1-1/2"-10T spline with a 1410 companion flange. Intermittent torque capacity reaches 400 lb-ft (542 Nm) - check application pages for actual torque ratings for your installation. Shaft power output is 38 HP at 500 RPM and 76 HP at 1000 RPM. The 541 Series rear-mount design uses Chelsea's Thrushaft® system, requiring only three fasteners for installation with no backlash adjustment. The rear-mount configuration frees up additional space under the vehicle for pump or driveline routing. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your Eaton Fuller application.
Features
Rear-mount design for Eaton Fuller transmissions, including Advantage and UltraShift Series
Thrushaft® installation requires only three fasteners with no backlash adjustment
Lever/mechanical shift type
1-1/2"-10T spline output shaft with 1410 Series companion flange
Intermittent torque up to 400 lb-ft (542 Nm) - verify actual rating for your application
Shaft power: 38 HP at 500 RPM, 76 HP at 1000 RPM
Tech Specs
- Transmission Manufacturer: Eaton/Fuller
- Intermittent Torque: 400 lb-ft / 542 Nm (Check Application Pages for Actual Torque Ratings)
- Output Power: 56+ HP / 51+ kW
- Output Shaft Type: 1-1/2"-10T Spline with 1410 Series Companion Flange
- Shift Type: Lever, Mechanical
- Mounting Type: Rear Mount
- Shaft Power: 38 HP at 500 RPM, 76 HP at 1000 RPM (28 kW at 500 RPM, 57 kW at 1000 RPM)
- Continuous Operation: Yes, with 30% de-rating
Additional Information
