The Chelsea 880XDAKP-M4XK or 880XDAKPM4XK is an 8-bolt power take-off assembly with lever mechanical shift, designed for Volvo/Mack, Allison, Eaton/Fuller, and other transmission applications. The output shaft is a 1-1/2"-10T spline fitted with a 1410 companion flange. Intermittent torque capacity is rated up to 500 lb-ft (678 Nm); check the Chelsea application pages for the actual torque rating specific to your transmission. Output power exceeds 56 HP (51+ kW), with shaft power measured at 48 HP at 500 RPM and 95 HP at 1000 RPM. The cast iron housing features a dual-pump output configuration, allowing a hydraulic pump to be mounted on each end of the PTO. Pro Gear and Transmission carries this as a genuine Chelsea part. Call us to confirm proper fit for your application.
Features
8-bolt mounting configuration
Lever mechanical shift type
Output shaft: 1-1/2"-10T spline with 1410 companion flange
Intermittent torque: up to 500 lb-ft (678 Nm) - verify actual rating in Chelsea application pages
Shaft power: 48 HP at 500 RPM, 95 HP at 1000 RPM
Dual-pump output - mount a hydraulic pump on each end of the PTO
Cast iron housing with simple backlash adjustment for easier installation
Tech Specs
- INTERMITTENT TORQUE: Up to 500 lb-ft (678 Nm) - Check Application Pages for actual torque rating
- TRANSMISSION COMPATIBILITY: Volvo/Mack, Allison, Eaton/Fuller, Other
- SHIFT TYPE: Lever Mechanical
- MOUNTING TYPE: 8-Bolt
- OUTPUT SHAFT TYPE: 1-1/2" - 10T Spline with 1410 Companion Flange
- OUTPUT POWER: 56+ HP (51+ kW)
- SHAFT POWER: 48 HP (36 kW) at 500 RPM; 95 HP (71 kW) at 1000 RPM
Additional Information
