The Chelsea 880XGAKP-M6AF is an 880 Series heavy-duty Power Take-Off Assembly built for 8-bolt manual transmission apertures. It uses a lever mechanical shift and delivers an intermittent torque rating of up to 500 lb-ft (678 Nm) - check application pages for your specific installation. The output shaft is a 1-1/2"-10T spline paired with a 1410 series companion flange, and shaft power is rated at 48 HP at 500 RPM and 95 HP at 1000 RPM. Compatible transmissions span Eaton/Fuller, Volvo/Mack, and Allison applications. The 880 Series is suited for fire trucks, bulk haulers, oil field equipment, aerial units, and large recovery trucks. Part number also referenced as 880XGAKPM6AF. Call us to confirm proper fit for your application.
The Chelsea 880 Series is designed for constant-mesh input gears and supports both high-speed and high-torque demands. Tapered cone bearings provide load-bearing capability suited to demanding cycles. The removable shift cover simplifies backlash adjustment during installation. Typical applications include bulk haulers, fire trucks, oil field equipment, aerial platforms, winch systems, and large truck recovery rigs. The 880 Series also supports continuous operation with a 30% de-rating.
Features
8-Bolt mounting for most manual transmissions including Eaton/Fuller, Volvo/Mack, and Allison
Lever mechanical shift as standard; dual-pump output allows a pump to be mounted on each end of the PTO
Output shaft: 1-1/2" - 10T spline with 1410 series companion flange
Intermittent torque rating: up to 500 lb-ft (678 Nm) - verify against application pages for your installation
Shaft power: 48 HP (36 kW) at 500 RPM; 95 HP (71 kW) at 1000 RPM
Rugged cast iron housing with removable shift cover for straightforward backlash adjustment
Tech Specs
- INTERMITTENT TORQUE: Up to 500 lb-ft (678 Nm) - Check Application Pages for Actual Torque Ratings
- SHIFT TYPE: Lever Mechanical
- MOUNTING TYPE: 8-Bolt
- OUTPUT SHAFT TYPE: 1-1/2" - 10T Spline with 1410 Series Companion Flange
- OUTPUT POWER: 56+ HP (51+ kW)
- SHAFT POWER: 48 HP (36 kW) at 500 RPM; 95 HP (71 kW) at 1000 RPM
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, Allison, Other
Additional Information
The Chelsea 880 Series is designed for constant-mesh input gears and supports both high-speed and high-torque demands. Tapered cone bearings provide load-bearing capability suited to demanding cycles. The removable shift cover simplifies backlash adjustment during installation. Typical applications include bulk haulers, fire trucks, oil field equipment, aerial platforms, winch systems, and large truck recovery rigs. The 880 Series also supports continuous operation with a 30% de-rating.
Parts Manual: Chelsea 880 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
