The Chelsea 880XMAHX-A5AF or 880XMAHXA5AF is an 880 Series Power Take-Off built for heavy-duty, high-torque applications. It mounts via an 8-bolt aperture and fits most manual transmissions, including Eaton/Fuller, Volvo/Mack, and Allison units. Shift is lever mechanical, and the output shaft is a 1-1/2"-10T spline with a 1410 series companion flange. Intermittent torque rating for the 880 Series reaches 500 lb-ft (678 Nm); check the application pages for the verified rating specific to your installation. Shaft power output is rated at 48 HP at 500 RPM and 95 HP at 1,000 RPM. The cast iron housing uses tapered cone bearings, and the removable shift cover allows straightforward backlash adjustment without special tooling. Typical applications include bulk haulers, fire trucks, oil field equipment, winch systems, and large-truck recovery rigs. Call us to confirm proper fit for your transmission.
The Chelsea 880 Series is suited for on-highway and off-highway applications including bulk haulers, fire trucks, oil field rigs, aerial equipment, winch systems, and large truck recovery. The 880 Series supports continuous operation with a 30% de-rating. Lubricant designation within the model code indicates whether pressure lube (P) or no pressure lube (X) is used.
Features
8-bolt mounting fits most manual transmissions including Eaton/Fuller, Volvo/Mack, and Allison
Lever mechanical shift with optional air control shift configuration
1-1/2"-10T spline output shaft with 1410 series companion flange
Intermittent torque rating up to 500 lb-ft (678 Nm) for the 880 Series
Shaft power: 48 HP at 500 RPM, 95 HP at 1,000 RPM
Dual-pump output allows a pump to be mounted on each end of the PTO
Cast iron housing with tapered cone bearings and removable shift cover for easy backlash adjustment
Tech Specs
- Intermittent Torque: 500 lb-ft / 678 Nm (check application pages for actual rating)
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, Allison, Other
- Shift Type: Lever Mechanical
- Mounting Type: 8-Bolt
- Output Shaft Type: 1-1/2" - 10T Spline with 1410 Series Companion Flange
- Output Power: 56+ HP / 51+ kW
- Shaft Power: 48 HP at 500 RPM, 95 HP at 1,000 RPM (36 kW at 500 RPM, 71 kW at 1,000 RPM)
- Cross Reference: 880XMAHX-A5AF or 880XMAHXA5AF
Additional Information
The Chelsea 880 Series is suited for on-highway and off-highway applications including bulk haulers, fire trucks, oil field rigs, aerial equipment, winch systems, and large truck recovery. The 880 Series supports continuous operation with a 30% de-rating. Lubricant designation within the model code indicates whether pressure lube (P) or no pressure lube (X) is used.
