The Chelsea 880XMAHX-A5SS or 880XMAHXA5SS is an 880 Series heavy-duty power take-off built for 8-bolt manual transmission apertures. It uses a lever mechanical shift and delivers output through a 1-1/2"-10 spline shaft with a 1410 companion flange. The 880 Series is rated for intermittent torque up to 500 lb-ft (678 Nm), with shaft power output of 48 HP at 500 RPM and 95 HP at 1000 RPM. Dual-pump output lets you mount a hydraulic pump on each end of the unit. Typical applications include bulk haulers, fire trucks, oil field equipment, winch systems, and large truck recovery rigs. A genuine Chelsea part, available from Pro Gear and Transmission. Call us to confirm proper fit for your transmission and application.
The Chelsea 880 Series is suited for high-torque, high and low speed applications across oil and gas, aerial, mining, on-highway, and other mobile markets. Typical vehicle applications include bulk haulers, fire trucks, winch trucks, oil field service vehicles, aerial equipment, and large recovery trucks. The 880 Series supports continuous operation with a 30% de-rating. Constant mesh input gears maintain smooth engagement across the operating range.
Features
8-Bolt mounting for compatibility with most manual transmissions including Eaton/Fuller, Volvo/Mack, and Allison
Lever mechanical shift with optional air control shift available on the 880 Series
1-1/2"-10T spline output shaft with 1410 companion flange
Dual-pump output allows a hydraulic pump to be mounted on each end of the PTO
Cast iron housing with tapered cone bearings for heavy-duty load capacity
Removable shift cover allows simple, accurate backlash adjustment at installation
Tech Specs
- Intermittent Torque: 500 lb-ft (678 Nm) - Check Application Pages for Actual Torque Ratings
- Shift Type: Lever Mechanical
- Mounting Type: 8-Bolt
- Output Shaft Type: 1-1/2" - 10T Spline with 1410 Companion Flange
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 48 HP (36 kW) at 500 RPM; 95 HP (71 kW) at 1000 RPM
- Compatible Transmissions: Eaton/Fuller, Volvo/Mack, Allison, and others
Additional Information
The Chelsea 880 Series is suited for high-torque, high and low speed applications across oil and gas, aerial, mining, on-highway, and other mobile markets. Typical vehicle applications include bulk haulers, fire trucks, winch trucks, oil field service vehicles, aerial equipment, and large recovery trucks. The 880 Series supports continuous operation with a 30% de-rating. Constant mesh input gears maintain smooth engagement across the operating range.
