The Chelsea 890 Series Power Take-Off, part number 890HAFJW-K5XS or 890HAFJWK5XS, is a hydraulic PowerShift PTO engineered specifically for Allison 3000 MD and 4000 HD Series transmissions. It mounts via a 10-bolt pattern and features an SAE C outlet flange with an SAE C (XS) extended output shaft that pushes the pump mounting flange to the rear of the transmission, creating meaningful clearance between the pump and the frame rail. The clutch sits at the rear of the housing, letting the gear section tuck tightly against the transmission. A one-piece main shaft eliminates the input splines found on conventional PTO-plus-extension setups. Wet-spline output lubrication reduces wear on the PTO and pump shaft under continuous-duty cycles. Shaft power output reaches 64 HP at 500 RPM and 128 HP at 1,000 RPM. Call us to confirm proper fit for your specific transmission configuration.

The 890 Series is suited for aerial trucks, fire and rescue vehicles, refuse trucks, truck cranes, and snow and ice equipment where pump clearance is limited and high continuous-duty torque is required. Unlike a conventional PTO-with-extension arrangement, the 890 Series is a single integrated unit: the one-piece main shaft and rear-positioned clutch allow the housing to sit flush against the transmission while the SAE C (XS) output extends rearward for adequate pump spacing. The 890 Series can be ordered for transmissions equipped with or without a cooler, retarder, or both.
Features
Fits Allison 3000 MD and 4000 HD Series transmissions via 10-bolt mounting
Hydraulic PowerShift (hot-shift) engagement for on-the-fly operation
SAE C (XS) extended output shaft moves pump flange to rear of transmission for improved clearance
One-piece main shaft eliminates input splines between PTO body and output extension
Wet-spline output lubrication extends PTO and pump shaft service life
Continuous-duty torque rating up to 670 lb-ft; shaft output 64 HP at 500 RPM and 128 HP at 1,000 RPM
Tech Specs
- Transmission Fit: Allison 3000 MD and 4000 HD Series
- Mounting Type: 10-Bolt
- Shift Type: Hydraulic PowerShift
- Outlet Flange Type: SAE C
- Output Shaft Type: SAE C Extended (XS) - Wet Spline
- Continuous Torque: 670 lb-ft (check application pages for actual torque ratings)
- Intermittent Torque: 501+ lb-ft
- Shaft Power: 64 HP at 500 RPM / 128 HP at 1,000 RPM
- Output Power: 56+ HP
- Lubricant: Wet Spline
Additional Information

The 890 Series is suited for aerial trucks, fire and rescue vehicles, refuse trucks, truck cranes, and snow and ice equipment where pump clearance is limited and high continuous-duty torque is required. Unlike a conventional PTO-with-extension arrangement, the 890 Series is a single integrated unit: the one-piece main shaft and rear-positioned clutch allow the housing to sit flush against the transmission while the SAE C (XS) output extends rearward for adequate pump spacing. The 890 Series can be ordered for transmissions equipped with or without a cooler, retarder, or both.