The Chelsea 897TAFJW-M5AB or 897TAFJWM5AB is a constant-mesh power take-off assembly built for Allison 3000 and 4000 Series transmissions. It mounts via a 10-bolt pattern and uses an SAE C output flange with a wet-spline output shaft, a design that extends pump shaft life under demanding duty cycles. The one-piece main shaft eliminates the input splines between the PTO and the output extension, moving the pump interface to the rear of the transmission so the housing tucks tightly against the frame rail for improved clearance. Continuous-duty torque is rated up to 670 lb-ft (908 Nm); intermittent torque is rated at 501+ lb-ft. Shift type is constant engagement. A genuine Chelsea 897 Series part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Fits Allison 3000 and 4000 Series transmissions via 10-bolt mounting
Constant-mesh (constant engagement) shift type for smooth, reliable power transfer
SAE C output flange with wet-spline output shaft to extend PTO and pump shaft life
One-piece main shaft design eliminates input splines between PTO body and output extension
Rear-mounted pump interface moves the output behind the transmission for improved pump clearance
Continuous-duty torque rating up to 670 lb-ft (908 Nm); intermittent torque 501+ lb-ft
Tech Specs
- Transmission Application: Allison 3000 and 4000 Series
- Mounting Type: 10-Bolt
- Shift Type: Constant Mesh (Constant Engagement)
- Input Gear Designator: FJ - Allison World Transmissions
- Output Shaft Type: SAE C (XS Extended Shaft)
- Outlet Flange Type: SAE C
- Lubricant: Wet Spline
- Continuous Torque: 670 lb-ft / 908 Nm (check application pages for actual torque ratings)
- Intermittent Torque: 501+ lb-ft / 501+ Nm
- Output Power: 56+ HP / 51+ kW
- Shaft Power at 500 RPM: 64 HP / 48 kW
- Shaft Power at 1000 RPM: 128 HP / 95 kW
Additional Information
