Chelsea 524XMDAX-AXK is a 524 Series rear mount PTO with pneumatic shift. It uses the rear aperture on certain transmissions, which helps where chassis clearance is tight, and its compact housing carries three gear ratios. The output shaft is DIN 5462 (4-bolt DIN 5462), with an ISO 7653 80mm x 80mm mount option and a dry spline. The series is rated for torque up to 300 lb-ft [407 Nm], so check the application pages for the actual rating on your transmission. A PTO whose gear mesh is set too tight tends to whine and wear out early, while one set too loose rattles, so a new noise is worth chasing. Listed for ZF, Volvo/Mack and Eaton/Fuller transmissions. A genuine Chelsea part from Pro Gear and Transmission; call us to confirm proper fit.
Features
Rear mount design for the rear transmission aperture
Pneumatic shift
DIN 5462 output shaft, 4-bolt DIN 5462
ISO 7653 80mm x 80mm mount option, dry spline
Series torque rating up to 300 lb-ft [407 Nm], check application pages
Listed for ZF, Volvo/Mack and Eaton/Fuller transmissions
Tech Specs
- Transmission Manufacturer: ZF, Volvo/Mack, Other, Eaton/Fuller
- Output Power: 49-57 (at 100 RPM Output Shaft) HP, 37-40 (at 100 RPM Output Shaft) kW
- Output Shaft Type: DIN 5462, 4-Bolt DIN 5462
- Shift Type: Pneumatic
- Mounting Type: Rear Mount
- Continuous Torque: 300 (Check Application Pages for Actual Torque Ratings) lb-ft, 407 (Check Application Pages for Actual Torque Ratings) Nm
- Shaft Power: 1000 RPM: 57 HP, 1000 RPM: 40 kW
- Weight: 22.3 lb, 10.1 kg
- Product Series: 524
- Mounting Option: X = ISO 7653 80mm x 80mm Mount
- Lubricant: X = Dry Spline