The Dana Spicer SVL Rear Axle shaft, part number 2023482-1 or 20234821, is a complete assembly built for Dana 44 semi-floating rear axle applications. This right-hand (RH) shaft measures 30.340 inches (770.636 mm) in length and carries 30 inboard splines. The bolt pattern is 5 x 5.00 with a wheel stud hole diameter of 0.600 in., a brake pilot diameter of 2.807 in., and a bearing pilot diameter of 1.378 in. The 10-bolt axle cover configuration and 5-lug wheel setup are confirmed. This is a non-ABS application with no ABS sensor ring. Both inner and outer axle shafts are included; wheel bearing, seal, and studs are not included. A genuine Spicer part sold by Pro Gear and Transmission - call us to confirm proper fit for your application.
Features
Dana 44 semi-floating rear axle application, right-hand (RH) position
30 inboard splines for secure differential engagement
Shaft length: 30.340 in. (770.636 mm)
5 x 5.00 bolt pattern, 5-lug wheel configuration
Brake pilot diameter 2.807 in., bearing pilot diameter 1.378 in.
Complete assembly - inner and outer axle included; non-ABS, no sensor ring
Tech Specs
- Axle Model Dana 44
- Material Steel
- Axle Type Complete Assembly
- Float Type Semi-Floating
- Location Right Hand (RH)
- Axle Length 30.340 in. (770.636 mm)
- Spline Count 30 Inboard
- Bolt Pattern 5 x 5.00
- Number of Wheel Lugs 5
- Wheel Stud Hole Diameter 0.600 in.
- Brake Pilot Diameter 2.807 in.
- Bearing Pilot Diameter 1.378 in.
- Cover Bolt Quantity 10
- ABS Sensor Ring Not Included
- Bearing Included No
- Seal Included No
- U-Joint Included No
- Wheel Studs Included No
- Wheel Nuts Included No
