The Dana Spicer 2023481-1 or 20234811 is a right-hand semi-floating rear axle shaft for the Dana 44 axle. At 29.370 inches (745.998 mm) in length, it carries 30 inboard splines and is built from steel as a complete assembly that includes both inner and outer axle. The 5-lug wheel flange runs a 5x5.00-inch bolt pattern, with a 0.600-inch wheel stud hole diameter, a 2.807-inch brake pilot diameter, and a 1.690-inch bearing pilot diameter. The axle cover uses 10 bolt holes. This shaft is Non-ABS with no ABS sensor ring installed. Bearings, seals, retainer ring, and wheel studs are not included. Call us to confirm proper fit for your application.
Features
Dana 44 axle application, right-hand (RH) position
Semi-floating axle shaft, complete assembly with inner and outer axle included
29.370-inch (745.998 mm) overall length
30 inboard splines
5-lug, 5x5.00-inch bolt pattern; 0.600-inch wheel stud hole diameter
Brake pilot diameter 2.807 in., bearing pilot diameter 1.690 in.; 10-bolt axle cover; Non-ABS, no sensor ring
Tech Specs
- Axle Model: Dana 44
- Material: Steel
- Location: Right-Hand (RH)
- Axle Type: Complete Assembly (Semi-Floating)
- Axle Length: 29.370 in. (745.998 mm)
- Spline Count: 30 Inboard
- Bolt Pattern: 5 x 5.00 in.
- Wheel Stud Hole Diameter: 0.600 in.
- Brake Pilot Diameter: 2.807 in.
- Bearing Pilot Diameter: 1.690 in.
- Axle Cover Bolt Holes: 10
- Number of Wheel Lugs: 5
- ABS: Non-ABS; no ABS sensor ring installed
- Inner Axle Included: Yes
- Outer Axle Included: Yes
- Axle Shaft Included: Yes
- Bearing Included: No
- Seal Included: No
- Retainer Ring Included: No
- U-Joint Included: No
- Wheel Studs Included: No
- Wheel Nuts Included: No
- Quantity: 1
