The Dana Spicer SVL rear axle shaft, part number 2023481-2 or 20234812, is a complete semi-floating axle assembly designed for the Dana 44 axle model. Positioned on the left-hand (driver's) side, this steel shaft measures 32.360 inches (821.944 mm) in length with a 30-spline inboard count. The wheel flange accepts a 5-lug bolt pattern on a 5 x 5.00-inch bolt circle, with a wheel stud hole diameter of 0.600 in., a brake pilot diameter of 2.807 in., and a bearing pilot diameter of 1.690 in. The axle cover uses 10 bolt holes. No ABS sensor ring is included or installed. Bearing, seal, wheel studs, and retainer ring are not included. Call us to confirm proper fit for your application.
Features
Dana 44 axle model, left-hand (driver's side) semi-floating complete assembly
30-spline inboard count, steel construction
Shaft length: 32.360 in. (821.944 mm)
5-lug wheel flange, 5 x 5.00-inch bolt pattern, 0.600-in. stud hole diameter
Brake pilot diameter: 2.807 in.; bearing pilot diameter: 1.690 in.
10-bolt axle cover; no ABS sensor ring included or installed
Tech Specs
- Axle Model Dana 44
- Material Steel
- Axle Type Complete Assembly
- Full-Floating or Semi-Floating Semi-Floating
- Location Left-Hand (LH)
- ABS Non-ABS
- Shaft Length 32.360 in. (821.944 mm)
- Spline Count (Inboard) 30
- Bolt Pattern 5 x 5.00 in.
- Number of Wheel Lugs 5
- Wheel Stud Hole Diameter 0.600 in.
- Brake Pilot Diameter 2.807 in.
- Bearing Pilot Diameter 1.690 in.
- Axle Cover Bolt Hole Quantity 10
- ABS Sensor Ring Included No
- Bearing Included No
- Seal Included No
- Retainer Ring Included No
- Wheel Studs Included No
- U-Joint Included No
