The Eaton Fuller K-3195 or K3195 is a Master Valve Repair Kit covering the air shift master valve found on Eaton Fuller manual transmissions. The kit includes all the service components needed for a complete master valve rebuild: three 5/32" steel balls, two O-rings and an O-ring retainer, a shift valve seal, a valve actuator assembly, a split actuator detent, three types of compression springs (one single, three-count, and two-count sets), a wave washer, a supplemental retainer, and a grease lubricant packet. Having every item in one kit reduces the chance of missing a small component mid-repair. Sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
Eaton Fuller part number K-3195 or K3195
Covers master valve rebuild on Eaton Fuller manual transmissions
Includes three 5/32" steel balls and valve actuator assembly
Two O-rings, O-ring retainer, and shift valve seal included
Three variants of compression springs plus a wave washer included
Split actuator detent and grease lubricant packet also included
Tech Specs
- Part Number: K-3195 or K3195
- Kit Type: Master Valve Repair Kit
- Ball Size: 5/32" steel (qty 3)
- O-Rings: qty 2
- O-Ring Retainer: qty 1
- Shift Valve Seal: qty 1
- Valve Actuator Assembly: qty 1
- Compression Spring (single): qty 1
- Compression Spring (3-count set): qty 3
- Compression Spring (2-count set): qty 2
- Wave Washer: qty 1
- Split Actuator Detent: qty 1
- Lubricant/Grease Packet: qty 1
- Unit of Measure: Each
