The Eaton 127598 is a .020 in. thick shim for Dana Spicer drive axles. A shim is a thin spacer that fills a small gap, letting a technician adjust the position of parts and set them correctly during assembly.
The factory parts list carries this number in the 40 Series Single Reduction Tandem Drive Axle, the DS404 / RS404, DS405, DSH40, DSH44 and DST40 tandem axles, and the DSP40 and DSP41 single reduction axles. In the 40 Series and DSH40 books it shows up in both the forward and rear axle parts lists. A genuine Eaton part from Pro Gear and Transmission. Call us to confirm proper fit for your axle.
Interchanges:
- 72890-020
- EE72890-020
Features
Shim, .020 in. thick
Listed in the 40 Series Single Reduction Tandem Drive Axle forward and rear axle parts lists
Listed in the DS404 / RS404 and DS405 forward axle diagrams
Listed in the DSH40, DSH44 and DST40 forward axle parts lists
Listed in the DSP40 and DSP41 single reduction forward axle parts lists
A thin spacer that lets parts be adjusted into position during assembly
Tech Specs
- Thickness: .020 in.
Used in these Dana Spicer models
