Meritor 18N4-3371 or 18N43371 End Yoke from the 18N series, with 39 splines on a 2.024 in. spline diameter. The spline length is 2.31 in. and the splines are not involute. Hub diameter is 3.00 in., center to end measures 5.19 in., and the counter bore is 0.12 in. deep. Joint angle is 30 degrees, bearing cap diameter is 1.94 in., and the width across the ears is 7.55 in. It takes the M281X U-joint kit. Our parts manual lists it in the Meritor 180/185/186 & 380 Series Drive Axle, under Round Bearing Type Yokes, and in the Meritor Out-of-Production Heavy-Duty Axle. A genuine Meritor part from Pro Gear and Transmission.
Features
39 splines on a 2.024 in. spline diameter, 2.31 in. spline length, not involute
Hub diameter 3.00 in., center to end 5.19 in.
Counter bore depth 0.12 in., joint angle 30 degrees
Bearing cap diameter 1.94 in., 7.55 in. across the ears
Takes the M281X U-joint kit
Listed in the Meritor 180/185/186 & 380 Series Drive Axle, Round Bearing Type Yokes
Tech Specs
- Series: 18N
- Spline diameter: 2.024 in.
- Number of splines: 39
- Spline length: 2.31 in.
- Spline type: not involute
- Hub diameter: 3.00 in.
- Center to end: 5.19 in.
- Counter bore depth: 0.12 in.
- Joint angle: 30 degrees
- Bearing cap diameter: 1.94 in.
- Width across ears: 7.55 in.
- U-joint kit: M281X
Used in these Meritor models
