The Muncie SH6S-U6809-A1CX or SH6SU6809A1CX is an SH Series air-shift-only power take-off built for high-torque applications. It features a 6-bolt cast iron housing and an integral air shift design with no exposed air cylinder, keeping the installation clean and protected. The SH Series bridges the gap between Muncie's TG and 82 Series PTOs, offering 5 speed ratios and 12 output shaft options to match most popular pump types. Seventeen input gear sets cover the most common transmission configurations. Intermittent torque ratings vary by speed ratio, reaching up to 400 lb.ft. (542 Nm) at the 05 and 07 ratios. Call us to confirm proper fit for your transmission and pump setup.
Features
Air-shift-only design with integral air cylinder, no exposed air cylinder hardware
6-bolt cast iron housing for straightforward mounting and structural strength
5 available speed ratios, up to 400 lb.ft. (542 Nm) intermittent torque at the 05 and 07 ratios
17 input gear sets to fit most popular transmission configurations
12 output shaft options to match the most common hydraulic pump types
Positioned between the Muncie TG and 82 Series for demanding medium-duty applications
Tech Specs
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
