The Muncie SH8 Series Power Take-Off, part number SH8S-U6005-P1IX or SH8SU6005P1IX, is an air-shift-only PTO built for high-torque applications. It features an integral air shift design with no exposed air cylinder, housed in a heavy-duty 8-bolt cast iron shell measuring 11.63 in. H x 13.38 in. W x 15.63 in. L. With 17 input gear sets covering most popular transmission configurations, 5 available speed ratios, and 12 output shaft options to match common pump types, this unit fits a wide range of vocational truck builds. Torque ratings vary by speed ratio, the series table shows intermittent torque ranging from 325 to 400 lb-ft depending on the ratio selected. Call us to confirm the right ratio and output configuration for your application.
Features
Integral air shift design with no exposed air cylinder
8-bolt cast iron housing: 11.63 in. H x 13.38 in. W x 15.63 in. L
17 input gear sets to fit most popular transmissions
5 speed ratios available for application flexibility
12 output shaft options to match most common pump types
Intermittent torque ratings up to 400 lb-ft (542 Nm) depending on speed ratio
Tech Specs
- Housing: 8-bolt cast iron
- Height: 11.63 in.
- Width: 13.38 in.
- Length: 15.63 in.
- Input gear sets: 17
- Speed ratios: 5
- Output shaft options: 12
- Shift type: Air shift only (integral, no exposed cylinder)
- Part number: SH8S-U6005-P1IX or SH8SU6005P1IX
Additional Information
| PTO TORQUE & HORSEPOWER RATINGS | ||||||
|---|---|---|---|---|---|---|
|
Speed Ratio
|
Intermittent HP@1000 RPM
|
Intermittent Torque lbs.ft.
|
Continuous Torque lbs.ft.
|
Intermittent (kw)@1000 RPM
|
Intermittent Torque (NM)
|
Continuous Torque (NM)
|
| 05 | 76 | 400 | 280 | (57) | (542) | (379) |
| 07 | 76 | 400 | 280 | (57) | (542) | (379) |
| 09 | 71 | 375 | 263 | (53) | (508) | (356) |
| 12 | 62 | 325 | 228 | (46) | (441) | (309) |
| 13 | 62 | 325 | 228 | (46) | (441) | (309) |
