The Chelsea 442XSBQX-A3XD is a 442 Series Power Take-Off built for 6-bolt transmission applications. The cast iron housing and tapered cone bearings on the output shaft are characteristic of the 442 Series, which carries an intermittent torque rating of 201 to 300 lb-ft and output power of 46 to 55 HP. The series supports wire/cable or mechanical shift and uses a round shaft output with a 1-inch, 1/4-inch key. The 442 Series is suited for tow trucks, dump trucks, service trucks, and aerial equipment. Available from Pro Gear and Transmission.
Features
6-bolt mounting compatible with a wide range of transmission applications
Cast iron housing with tapered cone bearings on the output shaft
Intermittent torque rating: 201 to 300 lb-ft (339 Nm) for the 442 Series
Output power: 46 to 55 HP; shaft power 24 HP at 500 RPM, 48 HP at 1,000 RPM
Air shift type
Round shaft output with 1-1/4-inch diameter, 5/16-inch key
Tech Specs
- Mounting Type: 6-Bolt
- Mounting Option: Standard Mount (X)
- Gear Ratio Code: S (24/22)
- Input Gear Designator: BQ
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift (A)
- Assembly Arrangement: 3
- Output Option: 1-1/4" Round Standard Shaft with 5/16" Key (XD)
- Intermittent Torque (Series): 201 to 300 lb-ft / 301 to 400 Nm
- Output Power (Series): 46 to 55 HP / 31 to 40 kW
- Shaft Power: 24 HP at 500 RPM; 48 HP at 1,000 RPM
- Housing Material: Cast Iron
- Product Series: 442
Additional Information
Parts manual and diagrams: Chelsea 442 Series PTO parts list with prices
