The Chelsea 447 Series Power Take-Off, part number 447XSETX-A5GF or 447XSETXA5GF, is purpose-built to eliminate internal interference problems across a wide variety of transmissions. Compatible with Eaton/Fuller, ZF, and other transmission manufacturers, it mounts via a 6-bolt pattern with no adapter plate required. Shift is wire/cable mechanical. The output shaft is a 1-1/4" round with keyway. Intermittent torque ratings fall in the 201-300 lb-ft range; check application pages for the actual rating specific to your configuration. Shaft power is rated at 21 HP at 500 RPM and 43 HP at 1,000 RPM. The 447 Series uses tapered bearings for greater load-bearing capability compared to needle-bearing designs. Call us to confirm proper fit for your application.
Features
6-bolt mounting pattern, no adapter plate required
Wire/cable mechanical shift
1-1/4" round output shaft with keyway
Intermittent torque: 201-300 lb-ft (check application pages for actual rating)
Shaft power: 21 HP at 500 RPM, 43 HP at 1,000 RPM
One-piece input gear design eliminates interference inside the transmission PTO opening
Tech Specs
- Intermittent Torque: 201-300 lb-ft / 301-400 Nm (check application pages for actual torque rating)
- Shift Type: Wire/Cable, Mechanical
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" Round with Key
- Output Power: 36-45 HP / 31-40 kW
- Shaft Power: 21 HP at 500 RPM, 43 HP at 1,000 RPM (16 kW at 500 RPM, 32 kW at 1,000 RPM)
- Transmission Compatibility: Eaton/Fuller, ZF, Other
- Continuous Torque: De-rate intermittent torque rating by 30% (check application pages for actual rating)
