The Chelsea 489 Series Power Take-Off, part number 489GLAHX-V3GH or 489GLAHXV3GH, is an air shift PTO built for 8-bolt manual transmission openings. The one-piece cast iron housing bolts directly to the transmission without an adapter plate, which removes a potential leak path compared to two-piece designs. The 489 Series carries the same 250 lb-ft torque capacity as the Chelsea 442 Series and uses tapered bearings rather than needle bearings for greater load-bearing capability. The output shaft is a 1" 15-tooth SAE BB shaft on a greaseable SAE B 2-bolt flange. Intermittent torque rating for the 489 Series runs 201 to 300 lb-ft (301 to 400 Nm). Compatible transmissions include Eaton Fuller, Mack, and Tremec with an 8-bolt PTO aperture. Call us to confirm proper fit for your specific transmission and application.
Features
8-bolt mounting, direct to transmission housing with no adapter plate required
Air shift operation
Greaseable SAE B 2-bolt flange with a 1" 15-tooth SAE BB shaft
Intermittent torque rating: 201-300 lb-ft (301-400 Nm) series rating
Tapered bearings for greater load capacity versus needle-bearing designs
Internal parts common to Chelsea 442 Series for simplified service
Tech Specs
- Mounting Type: 8-Bolt (direct to transmission, no adapter plate)
- Mounting Option: Standard Mount with Metric Studs (G)
- Gear Ratio Code: L (25/34)
- Input Gear Designator: AH
- Lube Option: No Pressure Lube (X)
- Shift Option: Air Shift without Installation Kit (V)
- Assembly Arrangement: 3
- Output Option: Greaseable SAE B 2-Bolt Flange, SAE BB Shaft (1" 15T) (GH)
- Intermittent Torque (Series): 201-300 lb-ft / 301-400 Nm
- Output Power (Series): 46-55 HP / 31-40 kW
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1000 RPM
- Compatible Transmissions: Eaton Fuller, Mack, Tremec (8-bolt aperture)
- Dimensions (H x W x L): 8 in. x 10 in. x 14 in.
- NMFC Code: 128520 (Hydraulic PTOs, Pumps, Motors, etc.)
Additional Information
The Chelsea 489 Series PTO is suited for utility trucks, dump truck and trailer applications, snow and ice removal equipment, and fire and rescue vehicles. The kit-style design makes field service straightforward, and internal parts are shared with the 442 Series, so many components are interchangeable. The 489 Series offers eleven internal speed ratios and twenty-seven output configurations, including a 360-degree rotatable flange option with a greaseable shaft to reduce pump shaft spline fretting and corrosion. For series-level service documentation, Parker publishes the 489 Series Parts List (HY25-2442-M1_US) and the Chelsea Service Manual (HY25-6489-M1/US). Pro Gear and Transmission carries this genuine Chelsea part. Not sure this is the right PTO for your transmission? Give us a call.Parts manual and diagrams: Chelsea 489 Series PTO parts list with prices
Equivalent PTOs:
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.
