The Chelsea 489GSAHX-V5RK or 489GSAHXV5RK is a 489 Series Power Take-Off for manual transmissions with an 8-bolt mounting aperture. The integral one-piece cast iron housing bolts directly to the 8-bolt transmission opening on applications such as Eaton Fuller, Mack, and Tremec, eliminating the need for an adapter plate and reducing potential leak paths. The 489 Series delivers intermittent torque in the 201-300 lb-ft range and shaft power rated at 24 HP at 500 RPM and 48 HP at 1,000 RPM. This series uses wire/cable mechanical shift and features tapered bearings for greater load-bearing capability compared to needle bearing designs. A genuine Chelsea part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
8-bolt integral one-piece cast iron housing mounts directly to transmission opening, no adapter plate required
Wire/cable mechanical shift type
Intermittent torque rating: 201-300 lb-ft (301-400 Nm)
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Tapered bearings replace needle bearings for increased load capacity
Fits Eaton Fuller, Eaton Endurant, Mack, and Tremec manual transmissions
Tech Specs
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable, Mechanical
- Housing Material: One-piece cast iron
- Intermittent Torque: 201-300 lb-ft (301-400 Nm)
- Shaft Power: 24 HP (500 RPM), 48 HP (1,000 RPM)
- Output Shaft Type: Round shaft with 1-1/4" key
- Compatible Transmissions: Eaton Fuller, Eaton Endurant, Mack, Tremec (8-bolt aperture)
- Dimensions (H x W x L): 8 in. x 10 in. x 14 in.
