The Chelsea 221XEAHX-W5XD or 221XEAHXW5XD is a 221 Series Power Take-Off assembly built for low-speed, heavy-duty service. It mounts via a 6-bolt pattern and uses wire/cable mechanical shift actuation. The 1-1/4" round output shaft (with key) delivers up to 250 lb-ft intermittent torque, with shaft power rated at 24 HP at 500 RPM and 48 HP at 1000 RPM. Output power runs in the 46-55 HP range. Compatible transmissions include Allison, Eaton/Fuller, Volvo/Mack, and Hino units. The 221 Series uses tapered cone output bearings for strong load-carrying capability, and greaseable pump shafts help limit spline fretting and corrosion over the long haul. Available with a standard or low-profile housing. Call us to confirm proper fit for your application.
Features
6-bolt mounting pattern compatible with Allison, Eaton/Fuller, Volvo/Mack, and Hino transmissions
Wire/cable mechanical shift actuation
1-1/4" round output shaft with key
Intermittent torque up to 250 lb-ft (339 Nm); verify actual rating on application pages
Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
Greaseable pump shafts reduce spline fretting and corrosion; available in standard or low-profile housing
Tech Specs
- Intermittent Torque: 250 lb-ft / 339 Nm (check application pages for actual torque ratings)
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP / 31-40 kW
- Output Shaft Type: 1-1/4" Round with Key
- Transmission Manufacturer: Allison, Eaton/Fuller, Volvo/Mack, Hino
- Mounting Type: 6-Bolt
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1000 RPM (18 kW at 500 RPM, 36 kW at 1000 RPM)
Additional Information
