The Chelsea 272GAHVP-P3RK or 272GAHVPP3RK is a 272 Series hot shift power take-off assembly with a 6-bolt mounting configuration and a 1-1/4" round output shaft with a 5/16" key. Shift actuation is pneumatic or PowerShift (pneumatic/hydraulic), with an integral air control valve included. The 272 Series supports intermittent torque of 201-300 lb-ft (401-500 Nm) and continuous torque up to 300 lb-ft (407 Nm); check application pages for actual torque ratings on your specific installation. Output power reaches 56+ HP (41-50 kW), with shaft power of 29 HP at 500 RPM and 57 HP at 1,000 RPM. Compatible transmissions include Allison, Eaton/Fuller, Ford, Aisin, Volvo/Mack, and RAM. A genuine Chelsea part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
Features
6-bolt mounting configuration
1-1/4" round output shaft with 5/16" key
Pneumatic or PowerShift (pneumatic/hydraulic) shift actuation with integral air control valve
Intermittent torque: 201-300 lb-ft (401-500 Nm); continuous torque up to 300 lb-ft (407 Nm)
Shaft power: 29 HP at 500 RPM, 57 HP at 1,000 RPM
Compatible with Allison, Eaton/Fuller, Ford, Aisin, Volvo/Mack, and RAM transmissions
Tech Specs
- Intermittent Torque: 201-300 lb-ft (401-500 Nm)
- Continuous Torque: Up to 300 lb-ft (407 Nm) - check application pages for actual torque ratings
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" round with 5/16" key
- Shift Type: Pneumatic / PowerShift (Pneumatic-Hydraulic)
- Integral Air Control Valve: Included
- Output Power: 56+ HP (41-50 kW)
- Shaft Power at 500 RPM: 29 HP (21 kW)
- Shaft Power at 1,000 RPM: 57 HP (43 kW)
- Compatible Transmissions: Allison, Eaton/Fuller, Ford, Aisin, Volvo/Mack, RAM
Additional Information
The Chelsea 272 Series consolidates several earlier medium-duty hot shift PTO families, including the 230, 231, 236, 238, 270, and 271 series, into a single platform. The series offers nine speed ratios and eighteen shift options. Rotatable flanges allow flexibility in installation orientation. The Wet-Spline option (where applicable) is designed to extend PTO and pump shaft service life. The Smart Start option is available for high-torque start-up conditions. Typical applications for the 272 Series include aerial equipment, towing and recovery, construction equipment, and water trucks.Parts manual and diagrams: Chelsea 272 Series PTO parts list with prices
Equivalent PTOs:
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

