Features
10-bolt mounting aperture, compatible with Allison and Caterpillar automatic transmissions
Hydraulic PowerShift (hot shift) operation for on-the-go engagement
Ductile iron bearing cap, 117% stronger than gray iron predecessor
Enhanced clutch pack with 80% thicker steel discs to resist premature tooth wear
Nine speed ratios including both low and high speeds
Electronic Overspeed Control (EOC) protects driven equipment from overspeed damage
Wet spline lubrication option provides 7 to 10 times greater shaft life
SmartStart feature reduces shock load at start-up for applicable configurations
Rotatable cast iron flanges reduce pump clearance interference issues
Hose included, no separate order required
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: PowerShift (Hydraulic)
- Compatible Transmissions: Allison, Caterpillar (automatic transmissions with 10-bolt aperture)
- Continuous Operation: Yes
- Series Continuous Torque Rating: 390 lb-ft (529 Nm) - verify actual torque on application page
- Series Intermittent Torque Range: 301 to 400 lb-ft (501+ Nm)
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 37 HP at 500 RPM / 74 HP at 1000 RPM
- Output Types Available in Series: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Speed Ratios: Nine, including low and high
- Lubricant System: Pressure Lube (P) / Wet Spline (W) option
- Part Number: 281GCFJP-B5BV or 281GCFJPB5BV
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

