Features
Hydraulic PowerShift (hot-shift) operation for automatic transmissions with 10-bolt aperture
Ductile iron bearing cap, 117% stronger than gray iron predecessor
O-ring sealing between housing and bearing cap reduces vibrational effects and improves clamp load
80% thicker steel discs in the clutch pack resist premature tooth wear
Nine speed ratios including low and high speeds; continuous torque rated at 390 lb-ft (529 Nm)
Wet Spline Lubrication option extends shaft life 7 to 10 times; SmartStart reduces shock load at engagement; Electronic Overspeed Control (EOC) protects driven equipment
Tech Specs
- Mounting Type: 10-Bolt aperture (Allison and Caterpillar automatic transmissions)
- Shift Type: PowerShift (Hydraulic) - Hot Shift
- Continuous Torque: 390 lb-ft (529 Nm)
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 37 HP at 500 RPM / 74 HP at 1000 RPM (28 kW at 500 RPM / 55 kW at 1000 RPM)
- Speed Ratios: Nine ratios including low and high speeds
- Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
- Lubrication: Pressure Lube (P) or Wet Spline (W) option
- Continuous Operation: Yes
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
- MuncieA20-A1005-JX1IIPXNot listed online. Call 877-776-4600 or request a quote.
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

