Features
Ductile Iron Bearing Cap - 117% stronger than gray iron compared to the 280 Series predecessor
Enhanced Clutch Pack - steel discs are 80% thicker to resist premature tooth wear
O-ring sealing configuration between housing and bearing cap reduces vibrational effects and improves clamp load
Nine speed ratios including dedicated low and high speeds
Wet Spline Lubrication option provides 7 to 10 times greater shaft life
Electronic Overspeed Control (EOC) protects driven equipment; SmartStart reduces shock load at engagement
Positive stop for driveline outputs eliminates oil seal damage from coupling
Tech Specs
- Mounting Type: 10-Bolt aperture
- Shift Type: PowerShift (Hydraulic) - hot shift, continuous operation capable
- Compatible Transmission Manufacturer: Allison (automatic transmissions)
- Continuous Torque Rating: 390 lb-ft (529 Nm) - verify actual rating on application pages
- Output Types Available: SAE B pump flange, SAE C pump flange, ISO 7652 pump flange, driveline
- Output Shaft Options: SmartStart round shaft (1-1/4 in. with 5/16 in. key), 3/4 in. 11-tooth pump spline, SAE B 7/8 in. 13-tooth pump spline, SAE C 1-1/4 in. 14-tooth pump spline, 1410 companion flange
- Speed Ratios: Nine ratios including low and high speeds
- Lubricant Options: Pressure lube or wet spline
- Output Power: 56+ HP / 51+ kW
- Shaft Power: 37 HP at 500 RPM, 74 HP at 1000 RPM (28 kW at 500 RPM, 55 kW at 1000 RPM)
- Typical Markets: Fire and rescue, truck cranes, pumper cleaner, refuse
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
- MuncieA20-A1005-JR5X4PXNot listed online. Call 877-776-4600 or request a quote.
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

