Features
Hydraulic PowerShift (hot shift) operation for automatic transmissions with a 10-bolt aperture
Ductile iron bearing cap, 117% stronger than gray iron predecessor
O-ring sealing configuration between housing and bearing cap improves clamp load and reduces vibrational effects
80% thicker steel discs in the clutch pack to resist premature tooth wear
Nine speed ratios including low and high speeds
Wet Spline Lubrication option provides 7 to 10 times greater shaft life
Electronic Overspeed Control (EOC) protects driven equipment
SmartStart reduces shock load at start-up for applicable configurations
Rotatable cast-iron flanges reduce pump clearance interference
Positive Stop for driveline outputs eliminates oil seal damage from coupling
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: PowerShift (Hydraulic)
- Transmission Compatibility: Allison, Caterpillar (automatic transmissions)
- Continuous Torque: 390 lb-ft (529 Nm) series rating - confirm actual rating for your application
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 37 HP at 500 RPM / 74 HP at 1,000 RPM
- Speed Ratios: Nine (including low and high)
- Lubrication: Pressure Lube (P) or Wet Spline (W) option
- Continuous Operation: Yes
Additional Information
The Chelsea 281 Series PTO is used across fire and rescue, truck cranes, pumper cleaner, and refuse market applications. Parker documents for this series include the 281/288 Series Parts List (HY25-2281-M1/US) and the 267/281/288/871/878 Series Owner's Manual. Part number 281GDFJP-B5XR is also referenced as SP281GDFJP-B5XR.
Parts Manual: Chelsea 281 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
