Features
Ductile iron bearing cap, 117% stronger than gray iron, for increased durability
O-ring sealing configuration between housing and bearing cap improves clamp load and resists vibration
Enhanced clutch pack with 80% thicker steel discs to resist premature tooth wear
Nine speed ratios including low and high speeds
Rotatable cast-iron flanges reduce pump clearance interference
Electronic Overspeed Control (EOC) and SmartStart shock-load reduction protect driven equipment and extend service life
Tech Specs
- Mounting Type: 10-Bolt
- Shift Type: PowerShift (Hydraulic) Hot-Shift
- Transmission Compatibility: Allison automatic transmissions (10-bolt aperture)
- Continuous Operation: Yes
- Output Types: SAE B pump flange, SAE C pump flange, ISO 7652 pump flange, driveline
- Output Shaft Options: SmartStart round shaft (1-1/4 in. with 5/16 in. key), 3/4 in. 11-tooth pump spline, SAE B 7/8 in. 13-tooth pump spline, SAE C 1-1/4 in. 14-tooth pump spline, DIN 5462 pump spline, 1410 companion flange, DIN 120 flange, DIN 100 flange
- Lubrication: Pressure lube (P) or Wet Spline (W) option
- Wet Spline Benefit: 7 to 10 times greater shaft life vs. standard
- Series Continuous Torque Rating: 390 lb-ft (529 Nm) - verify actual rating on application page
- Shaft Power: 37 HP at 500 RPM, 74 HP at 1000 RPM (28 kW at 500 RPM, 55 kW at 1000 RPM)
- Typical Markets: Fire and rescue, truck cranes, pumper-cleaner, refuse
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
- MuncieA20-A1006-JR5BBPXNot listed online. Call 877-776-4600 or request a quote.
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

