Features
Chelsea 281 Series hydraulic PowerShift (hot-shift) PTO for 10-bolt automatic transmission apertures
Ductile iron bearing cap - 117% stronger than gray iron compared to the predecessor 280 Series
Enhanced clutch pack with 80% thicker steel discs to resist premature tooth wear
Nine speed ratios including low and high speeds; single continuous duty torque rating
Rotatable cast-iron flanges reduce pump clearance interference; Positive Stop for driveline outputs eliminates oil seal damage
Wet Spline Lubrication option provides 7 to 10 times greater shaft life; SmartStart reduces shock load at start-up; Electronic Overspeed Control (EOC) protects driven equipment
Tech Specs
- Mounting Type: 10-Bolt aperture (Allison and Caterpillar automatic transmissions)
- Shift Type: Hydraulic PowerShift (hot-shift)
- Continuous Torque: 390 lb-ft (529 Nm) - see application pages for actual ratings
- Intermittent Torque: 301-400 lb-ft (501+ Nm)
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 37 HP at 500 RPM / 74 HP at 1000 RPM
- Output Types: SAE B pump flange, SAE C pump flange, ISO 7652 pump flange, driveline
- Output Shaft Options: SmartStart round shaft (1-1/4 in. with 5/16 in. key), 3/4 in. 11-tooth pump spline, SAE B 7/8 in. 13-tooth pump spline, SAE C 1-1/4 in. 14-tooth pump spline, DIN 5462 pump spline, 1410 companion flange, DIN 120 flange, DIN 100 flange
- Lubrication: Pressure lube or Wet Spline option
- Continuous Operation: Yes
- Part Number: 281GDKVP-D8RK or 281GDKVPD8RK
Additional Information
Parts Manual: Chelsea 281 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
