The Chelsea 281 Series Power Take-Off, part number 281GSFJW-B3RF or 281GSFJWB3RF, is a hydraulically shifted hot-shift PTO designed for automatic transmissions with a 10-bolt aperture, including Allison transmissions. Built as an evolution of the 280 Series, the 281 Series introduces a ductile iron bearing cap rated 117% stronger than gray iron, an 80% thicker clutch pack steel disc, and an O-ring sealing configuration between the housing and bearing cap to improve clamp load and resist vibrational damage from modern engine designs. Output options include SAE B and SAE C pump flanges, ISO 7652 pump flanges, and driveline configurations. Nine speed ratios cover both low- and high-speed applications. Available markets include fire and rescue, refuse, pumper cleaner, and truck crane applications. Call us to confirm proper fit for your transmission and application.
Features
Hydraulic hot-shift (PowerShift) operation for 10-bolt automatic transmission apertures including Allison
Ductile iron bearing cap rated 117% stronger than gray iron for increased durability
80% thicker steel discs in the clutch pack to resist premature tooth wear
O-ring sealing configuration between housing and bearing cap improves clamp load and reduces vibrational effects
Nine speed ratios covering low- and high-speed ranges
Wet spline lubrication option provides 7 to 10 times greater shaft life
SmartStart reduces shock load at start-up; Electronic Overspeed Control (EOC) protects driven equipment
Tech Specs
- Mounting Type: 10-Bolt aperture
- Shift Type: PowerShift (Hydraulic hot-shift)
- Transmission Compatibility: Allison and Caterpillar automatic transmissions
- Continuous Torque (Series): 390 lb-ft (529 Nm) - verify actual rating on application pages
- Output Types: SAE B pump flange, SAE C pump flange, ISO 7652 pump flange, driveline
- Output Shaft Options: 1-1/4 in. round SmartStart shaft (5/16 in. key), 3/4 in. 11-tooth pump spline, SAE B 7/8 in. 13-tooth pump spline, SAE C 1-1/4 in. 14-tooth pump spline, DIN 5462 pump spline, 1410 companion flange, DIN 120 flange, DIN 100 flange
- Speed Ratios: 9 (includes low and high)
- Lubrication: Pressure lube and wet spline options available
- Continuous Operation: Yes
- Applicable Markets: Fire and rescue, truck cranes, pumper cleaner, refuse
Additional Information
Parts manual and diagrams: Chelsea 281 Series PTO parts list with prices
