The Chelsea 348 Series Power Take-Off Assembly, part number 348XKITX-Y5XD or 348XKITXY5XD, is a single low-speed forward and reverse PTO built for manual transmissions with an 8-bolt aperture. The 8-bolt mounting flange mounts directly to the transmission opening without an adapter plate, a practical advantage in tight installations. Output shaft is 1-1/4" round with a 5/16" key. Wire/cable or mechanical shift type. Intermittent torque is rated up to 200 lb-ft (271 Nm); check Chelsea application pages to confirm the actual rating for your specific configuration. Shaft power output runs 19 HP at 500 RPM and 38 HP at 1,000 RPM. The cast iron housing and heavy-duty ball bearings on the output shaft are characteristic of this series. Compatible with Eaton/Fuller, Volvo/Mack, and other manual transmissions. Call us to confirm proper fit for your application.
Features
8-bolt mounting flange mounts directly to transmission opening, no adapter plate required
Wire/cable or mechanical shift type; single low-speed forward and reverse
1-1/4" round output shaft with 5/16" key
Intermittent torque up to 200 lb-ft (271 Nm), verify actual rating on Chelsea application pages
Shaft power: 19 HP at 500 RPM, 38 HP at 1,000 RPM (14 kW / 28 kW)
Removable cover plate for backlash adjustment; heavy-duty ball bearing output
Tech Specs
- Intermittent Torque: Up to 200 lb-ft (271 Nm), check Chelsea application pages for actual torque rating
- Shift Type: Wire/Cable or Mechanical
- Output Power: 36-45 HP (21-30 kW)
- Transmission Manufacturer Compatibility: Eaton/Fuller, Volvo/Mack, Other
- Output Shaft Type: 1-1/4" Round with 5/16" Key
- Mounting Type: 8-Bolt
- Shaft Power: 19 HP (500 RPM), 38 HP (1,000 RPM); 14 kW (500 RPM), 28 kW (1,000 RPM)
- Lubrication: No pressure lube
Additional Information
Parts Manual: Chelsea 348 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
