The Chelsea 489 Series Power Take-Off, part number 489GHITX-V3XD or 489GHITXV3XD, mounts directly to 8-bolt manual transmission openings on Eaton/Fuller, Volvo/Mack, and other compatible transmissions. Its one-piece cast iron housing eliminates the adapter plate common on earlier designs, removing a potential leak path. The 489 Series delivers intermittent torque in the 201-300 lb-ft range and shaft power of 24 HP at 500 RPM or 48 HP at 1000 RPM. This unit uses a wire/cable mechanical shift and features a 1-1/4" round output shaft with key. Strong tapered bearings replace needle bearings for greater load capacity. Internal parts are common with the Chelsea 442 Series, making service straightforward. Call us to confirm proper fit for your application.
Features
8-bolt one-piece cast iron housing mounts directly to transmission opening, eliminating the need for an adapter plate
Wire/cable mechanical shift type
1-1/4" round output shaft with key
Intermittent torque rating in the 201-300 lb-ft (301-400 Nm) range; check application pages for actual torque ratings
Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
Internal parts common to Chelsea 442 Series for easier servicing; greaseable output options available
Tech Specs
- PRODUCT SERIES: 489
- MOUNTING TYPE: 8-Bolt
- SHIFT TYPE: Wire/Cable Mechanical
- OUTPUT SHAFT TYPE: 1-1/4" Round with Key
- INTERMITTENT TORQUE: 201-300 lb-ft (301-400 Nm); check application pages for actual torque ratings
- CONTINUOUS TORQUE: De-rate intermittent torque rating by 30%; check application pages for actual torque ratings
- OUTPUT POWER: 46-55 HP (31-40 kW)
- SHAFT POWER: 24 HP (18 kW) at 500 RPM; 48 HP (36 kW) at 1000 RPM
- TRANSMISSION COMPATIBILITY: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO opening
- LUBRICANT: X = No Pressure Lube; P = Pressure Lube
Additional Information
