The Chelsea 880QGLZX-D3XS or 880QGLZXD3XS is an 8-bolt, lever mechanical shift power take-off from the Chelsea 880 Series, designed for heavy-duty applications including bulk haulers, fire trucks, oil-field equipment, aerial units, and large recovery trucks. The output shaft is a 1-1/2"-10T spline fitted with a 1410 companion flange, and the series is rated for up to 500 lb-ft of intermittent torque. Shaft power output is 48 HP at 500 RPM and 95 HP at 1000 RPM. The dual-pump output design allows a hydraulic pump to be mounted on each end of the PTO. Compatible with a range of manual transmissions using an 8-bolt aperture, including Eaton/Fuller, Volvo/Mack, and Allison. Available from Pro Gear and Transmission. Call us to confirm proper fit for your application.
The Chelsea 880 Series is designed for high and low speed, high-torque applications with constant mesh input gears. Tapered cone bearings provide strong load-bearing capability. Typical applications include bulk haulers, winch systems, fire trucks, oil-field equipment, aerial platforms, and large truck recovery. The series fits most 8-bolt manual transmission apertures and is available for a wide variety of transmission manufacturers. Part number 880QGLZX-D3XS is also referenced as SP880QGLZX-D3XS.
Features
8-bolt mounting fits most manual transmissions including Eaton/Fuller, Volvo/Mack, and Allison
Lever mechanical shift with optional air control shift available in the 880 Series
1-1/2"-10T spline output shaft with 1410 series companion flange
Dual-pump output allows a hydraulic pump on each end of the PTO
Cast iron housing for durability in heavy-duty service
Removable shift cover enables straightforward backlash adjustment
Tech Specs
- Intermittent Torque: 500 lb-ft / 678 Nm (check application pages for actual torque ratings)
- Mounting Type: 8-Bolt
- Shift Type: Lever Mechanical
- Output Shaft Type: 1-1/2" - 10T Spline with 1410 Series Companion Flange
- Output Power: 56+ HP / 51+ kW
- Shaft Power: 48 HP (500 RPM), 95 HP (1000 RPM) / 36 kW (500 RPM), 71 kW (1000 RPM)
- Compatible Transmissions: Eaton/Fuller, Volvo/Mack, Allison, Other
- Continuous Operation: Yes, with 30% de-rating
Additional Information
The Chelsea 880 Series is designed for high and low speed, high-torque applications with constant mesh input gears. Tapered cone bearings provide strong load-bearing capability. Typical applications include bulk haulers, winch systems, fire trucks, oil-field equipment, aerial platforms, and large truck recovery. The series fits most 8-bolt manual transmission apertures and is available for a wide variety of transmission manufacturers. Part number 880QGLZX-D3XS is also referenced as SP880QGLZX-D3XS.
Parts Manual: Chelsea 880 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
