Skip to main content

Stock photo not actual item

890UFFJW-B5XS Chelsea PTO Assembly

Chelsea

Listing Price: $12,429.33
Sale Price: $6,836.13
(No reviews yet) Write a Review
Product Code:
CHL890UFFJWB5XS
Condition:
New
Availability:
Usually Ships in 3 to 5 Business Days
Adding to cart… The item has been added
The Chelsea 890 Series Power Take-Off Assembly, part number 890UFFJW-B5XS or 890UFFJWB5XS, is a hydraulic hot-shift PTO engineered specifically for Allison 3000 MD and 4000 HD Series transmissions. The 890 Series moves the pump mounting flange to the rear of the transmission, fitting between the transmission and the frame rail to keep the output clear of tight engine-bay obstructions. The one-piece main shaft eliminates the input splines found on conventional PTO-plus-extension setups, and the clutch locates at the rear of the housing so the gear section tucks tightly against the transmission. Mounting is 10-bolt with an additional rear-support bracket. The SAE C output shaft delivers up to 670 lb-ft continuous torque and 128 HP at 1,000 RPM. Wet-spline lubrication extends pump shaft service life in demanding cycles. Typical installations include aerial trucks, fire and rescue apparatus, refuse trucks, and truck cranes. Call us to confirm proper fit for your specific Allison transmission configuration.

Features

Fits Allison 3000 MD and 4000 HD Series transmissions via 10-bolt mount with rear-support bracket
Hydraulic PowerShift (hot shift) engagement for on-the-fly operation
SAE C output shaft with extended shaft design to improve pump clearance
Continuous torque rating up to 670 lb-ft; intermittent torque rated at 501+ lb-ft
Shaft power: 64 HP at 500 RPM, 128 HP at 1,000 RPM
Wet-spline output lubrication to extend PTO and pump shaft service life

Tech Specs

  • Transmission Fit: Allison 3000 MD and 4000 HD Series
  • Product Series: 890
  • Mounting Type: 10-Bolt (with additional rear-support bracket)
  • Shift Type: Hydraulic PowerShift (hot shift)
  • Output Shaft Type: SAE C Extended (XS)
  • Outlet Flange Type: SAE C
  • Continuous Torque: 670 lb-ft (check application pages for actual torque ratings)
  • Intermittent Torque: 501+ lb-ft
  • Output Power: 56+ HP (51+ kW)
  • Shaft Power: 64 HP (48 kW) at 500 RPM; 128 HP (95 kW) at 1,000 RPM
  • Lubrication: Wet Spline

Additional Information

Chelsea PTO 890 Series model break down
Equivalent PTOs:

Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

Call Us Now!