The Eaton Fuller K-2055 or K2055 is the Master Valve Repair Kit for Fuller transmissions. This kit contains 13 numbered components sourced directly from Eaton: three 5/32-inch steel balls (20102), one O-ring retainer (20103), two O-rings (20104), one retainer (20105), one shift valve seal (20106), six compression springs across three part numbers (20108, 20109, 20110), one split actuator detent (20174), one valve actuator (21809), one wave washer (22113), grease lubricant (71218), and an instruction letter. Each item is included at the factory-specified quantity. A genuine Eaton Fuller part sold by Pro Gear and Transmission. Call us to confirm proper fit for your application.
20102 - Ball, 5/32 Steel x3
20103 - Retainer, O-Ring x1
20104 - O-Ring x2
20105 - Retainer x1
20106 - Seal, Shift Valve x1
20108 - Spring, Compression x1
20109 - Spring, Compression x3
20110 - Spring, Compression x2
20174 - Detent, Split Actuator x1
21809 - Actuator, Valve x1
22113 - Washer, Wave x1
71218 - Lubricant, Grease x1
L-287 - Letter, Instruction x1
Features
Three 5/32-inch steel balls (part 20102) included at specified quantity
One shift valve seal (part 20106) for master valve service
Six compression springs across three part numbers: 20108, 20109, and 20110
One valve actuator (21809) and split actuator detent (20174) included
Two O-rings (20104) plus retainer (20103) and retainer (20105)
Factory grease lubricant (71218) and printed instruction letter included
Additional Information
Kit K-2055 Component List:20102 - Ball, 5/32 Steel x3
20103 - Retainer, O-Ring x1
20104 - O-Ring x2
20105 - Retainer x1
20106 - Seal, Shift Valve x1
20108 - Spring, Compression x1
20109 - Spring, Compression x3
20110 - Spring, Compression x2
20174 - Detent, Split Actuator x1
21809 - Actuator, Valve x1
22113 - Washer, Wave x1
71218 - Lubricant, Grease x1
L-287 - Letter, Instruction x1
