Midland Haldex EL16112X compressor 1600 is a flange-mount, gear-driven, water-cooled air brake compressor with left head rotation and left block rotation. Rated displacement is 16.1 CFM at 1250 RPM, from a 2.75 in. bore and a 1.87 in. stroke. It has a top/threaded discharge, crankshaft end oil feed and flange oil drain, and the gear is included. It is listed as a 0° Mack in-line, 6-cylinder, extended flange unit.
The compressor makes the air the brake system works from, filling the reservoirs whenever the engine runs, while the governor unloads it once pressure is built. A genuine Midland Haldex part from Pro Gear and Transmission.
Thru Drive Power Steering Adaptable.
Changeover/Installation Instructions - L31035.
Service units are furnished without governors and manifolds and may require head rotation and end cap rotation before installation or changeover.
Torque Nut to 80-100 ft. lbs.
Include Installation Gaskets.
A refundable core charge of $210.00 applies to this item and will be collected at checkout. The core charge is refunded upon receipt of your returned core, subject to its condition; customer is responsible for return shipping. Call us at (877) 776-4600 for details.
A factory handling fee of $25.00 per order is added at checkout.
Features
Flange mount, gear drive, water cooled
Left head rotation and left block rotation, gear included, high capacity
Rated displacement 16.1 CFM at 1250 RPM, 2.75 in. bore, 1.87 in. stroke
Top/threaded discharge, crankshaft end oil feed, flange oil drain
Overall height 12.19 in., width 5.43 in., length 11.58 in.
Mack in-line, 6-cylinder, extended flange
Tech Specs
- Head Rotation Left
- Block Rotation Left
- Notes Gear Included , High Capacity
- OEM Part Number N7211B Exact Replacement
- Core Group 1600
- Overall Height 12.00 in. (EL1300), 12.19 in. (EL1600)
- Overall Width 5.43 in.
- Overall Length 11.58 in.
- External Shaft Length .16 in.
- Bore Diameter 2.75 in.
- Stroke 1.50 in. (EL1300) and 1.87 in. (EL1600)
- Rated Displacement 13.0 (EL1300) and 16.1 (EL1600) CFM @ 1250 RPM
- Approximate Weight 51 lbs.
Additional Information
Orientation viewed from front.Thru Drive Power Steering Adaptable.
Changeover/Installation Instructions - L31035.
Service units are furnished without governors and manifolds and may require head rotation and end cap rotation before installation or changeover.
Torque Nut to 80-100 ft. lbs.
Include Installation Gaskets.
