Skip to main content

281GCFJP-K5RY Chelsea PTO Assembly

Chelsea

Listing Price: $5,629.73
Sale Price: $4,120.94

This item qualifies for FREE shipping on orders over $295 and under 70 lbs

(No reviews yet) Write a Review
Product Code:
CHL281GCFJPK5RY
Condition:
New
Availability:
Usually Ships in 3 to 5 Business Days
Adding to cart… The item has been added
The Chelsea 281GCFJP-K5RY or 281GCFJPK5RY is a 281 Series Power Take-Off built for automatic transmissions with a 10-bolt aperture, commonly used on Allison and Caterpillar transmissions. It uses hydraulic PowerShift (hot-shift) engagement for continuous-duty operation. The 281 Series carries a 390 lb-ft continuous torque rating and offers nine speed ratios spanning low and high ranges. Outputs include SAE B and SAE C pump flanges, ISO 7652 pump flange, and driveline configurations. A ductile iron bearing cap is 117% stronger than gray iron, and an O-ring sealing configuration between the housing and bearing cap improves clamp load and reduces the effects of engine vibration. The clutch pack features steel discs 80% thicker than the predecessor 280 Series. Call us to confirm proper fit for your application.

Features

10-Bolt mounting for Allison and Caterpillar automatic transmissions
Hydraulic PowerShift (hot-shift) engagement rated for continuous-duty operation
390 lb-ft continuous torque rating across nine speed ratios including low and high ranges
Ductile iron bearing cap, 117% stronger than gray iron, with O-ring sealing for improved clamp load
Enhanced clutch pack with steel discs 80% thicker than the 280 Series predecessor
Wet Spline lubrication option provides 7 to 10 times greater output shaft life; SmartStart reduces shock load at engagement; Electronic Overspeed Control (EOC) protects driven equipment

Tech Specs

  • Mounting: 10-Bolt
  • Shift Type: Hydraulic PowerShift (Hot Shift)
  • Continuous Torque: 390 lb-ft (529 Nm)
  • Speed Ratios: Nine, including low and high
  • Output Types: SAE B Pump Flange, SAE C Pump Flange, ISO 7652 Pump Flange, Driveline
  • Transmission Compatibility: Allison and Caterpillar automatic transmissions (10-bolt aperture)
  • Lubrication: Pressure Lube (P) or Wet Spline (W) option
  • Output Power: 56+ HP / 51+ kW
  • Shaft Power: 37 HP at 500 RPM, 74 HP at 1000 RPM

Additional Information

Chelsea PTO 281 Series model break down
Equivalent PTOs:

Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

Call Us Now!