The Chelsea 489 Series Power Take-Off Assembly, part number 489ZFDAX-W5RB or 489ZFDAXW5RB, mounts directly to an 8-bolt transmission opening on compatible manual transmissions including Eaton Fuller, Mack, and Tremec. The one-piece cast iron housing eliminates the need for an adapter plate, removing a potential leak path. Shift is wire/cable mechanical. The 1-1/4" round output shaft supports intermittent torque in the 250 lb-ft range and shaft power of 24 HP at 500 RPM or 48 HP at 1,000 RPM. Tapered bearings replace needle bearings for greater load capacity. Internal parts are common to the Chelsea 442 Series. Call us to confirm proper fit for your application.
Features
8-bolt integral cast iron housing mounts directly to compatible manual transmissions without an adapter plate
Wire/cable mechanical shift; electric-over-air shift option also available
1-1/4" round output shaft with key
Intermittent torque rating: 201-300 lb-ft (301-400 Nm) series range; actual rating varies by application
Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
Internal parts common to Chelsea 442 Series; greaseable output options available
Tech Specs
- Product Series: 489
- Mounting Type: 8-Bolt
- Shift Type: Wire/Cable Mechanical
- Output Shaft Type: 1-1/4" Round with Key
- Intermittent Torque: 201-300 lb-ft (301-400 Nm) - Check Application Pages for Actual Torque Ratings
- Output Power: 46-55 HP (31-40 kW)
- Shaft Power: 24 HP at 500 RPM / 48 HP at 1,000 RPM (18 kW at 500 RPM / 36 kW at 1,000 RPM)
- Lubricant: X = No Pressure Lube, P = Pressure Lube
- Transmission Compatibility: Eaton/Fuller, Volvo/Mack, and other manual transmissions with 8-bolt PTO aperture
Additional Information
Parts Manual: Chelsea 489 Series PTO Parts Manual (PDF) - exploded views, item numbers and the full parts breakdown for this series.
