Features
10-bolt mounting designed for Allison 3000 MD and 4000 HD Series transmissions
Hydraulic PowerShift (hot shift) engagement
SAE C (XS) output shaft with wet-spline lubrication for extended spline life
Continuous-duty torque rating up to 670 ft-lb; intermittent torque 501+ ft-lb
Shaft power: 64 HP at 500 RPM, 128 HP at 1,000 RPM
Rear-positioned pump flange moves output away from the frame rail for improved pump clearance
Tech Specs
- Transmission Application: Allison 3000 MD Series and 4000 HD Series
- Product Series: 890
- Mounting Type: 10-Bolt
- Shift Type: Hydraulic PowerShift (Hot Shift)
- Output Shaft Type: SAE C (XS)
- Outlet Flange Type: SAE C
- Lubricant/Spline: Wet Spline
- Continuous Torque: Up to 670 lb-ft (check application pages for actual torque ratings)
- Intermittent Torque: 501+ lb-ft
- Output Power: 56+ HP (51+ kW)
- Shaft Power: 64 HP (48 kW) at 500 RPM; 128 HP (95 kW) at 1,000 RPM
- Part Number: 890HCFJW-B5ZS or 890HCFJWB5ZS
Additional Information

The Chelsea 890 Series is a single-unit design, not a PTO with a bolt-on extension. The one-piece main shaft eliminates the input splines that exist between the PTO body and a separate output extension, reducing potential leak and wear points. The clutch is located at the rear of the PTO housing so the gear section sits flush against the transmission, keeping the overall installed profile compact. Typical platforms include aerial trucks, fire and rescue apparatus, snow and ice equipment, refuse trucks, and truck cranes where pump space is limited and high continuous torque is required. The 890 Series accommodates Allison transmissions equipped with a cooler, a retarder, both, or neither.
Parts manual and diagrams: Chelsea 890 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.
