Meritor T-221 / T-223 Transfer Case Parts Manual
T-223 Service Kit T-223-1: P.t.o. Miscellaneous Parts
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 2 | K2412 | Cotter-P.T.O. Shaft Nut | 1 | $131.00 | Add to Cart | |
| 5 | A1805N352 | Oil Seal-P.T.O. Shaft | 1 | Call for availability | ||
| 18, 23 | K238 | Cotter-Shift Lever And Shift Lever Stud | 2 | $63.00 | Add to Cart | |
| 27 | A1805B158 | Oil Seal-P.T.O. Shift Shaft | 1 | $38.15 | Add to Cart | |
| 10, 35, 49 | 2297Z6656 | Silicone Gasket-3 Oz. Tube | 1 | $104.20 | Add to Cart | |
| 8 | 1874A105 | Sleeve-P.T.O. Shaft Oil Seal | 1 | Call for availability | ||
| 32 | 2858T20 | Spring-Shift Lock Ball | 1 | $969.90 | Add to Cart | |
| 33 | 1898H34 | Ball-Shift Shaft Lock | 1 | $148.00 | Add to Cart | |
| 31, 39 | 1229E421 | Lockwasher-Shift Lockscrew And Drive Clutch | 2 | Call for availability | ||
| 48 | 2858W101 | Spring-Oil Pump Plunger | 1 | Call for availability | ||
| 54 | 1898Q251 | Ball-Pump Inlet Check Valve | 1 | Call for availability | ||
| 55, 61 | 2858X102 | Spring-Check Valve | 2 | $31.85 | Add to Cart | |
| 60 | 1228K37 | Ball-Pump Outlet Check Valve | 1 | $21.00 | Add to Cart | |
| 14B | 16X40 | Key-Tapered P.T.O. Shaft | 1 | Call for availability |
T-223 Service Kit T-223-2: P.t.o. Bearings/Shims
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 11 | 2803V568 | Shims-P.T.O. Shaft Cap (.003") | 3 | Call for availability | ||
| 11 | 2803W569 | Shims-P.T.O. Shaft Cap (.005") | 3 | Call for availability | ||
| 11 | 2803X570 | Shims-P.T.O. Shaft Cap (.010") | 5 | Call for availability |
T-223 Service Kit T-223-3: Main Case Seals
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 86, 148 | A1805R408 | Oil Seal-Input Shaft Front Brg. Cap And Output | 2 | $98.54 | Add to Cart | |
| 86 | A1205T1242 | Oil Seal-Input Shaft Front Brg. Cap | 1 | $72.30 | Add to Cart | |
| 86, 96 | A1805A573 | Oil Seal-Input Shaft Front Brg. Cap And Rear | 2 | $91.68 | Add to Cart | |
| 160 | A1805P536 | Oil Seal-Front Output Shaft Rear | 1 | $49.96 | Add to Cart | |
| 200, 201 | A1205N1132 | Oil Seal-Shift Shaft | 2 | $41.40 | Add to Cart |
T-223 Service Kit T-223-4: Main Case Bearings/Shims/Spacers
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 79C | 1229F3048 | Washer-Input Shaft Front | 1 | Call for availability | ||
| 79C | 1229F2814 | Washer-Input Shaft Front | 1 | Call for availability | ||
| 79C | 1229E3047 | Washer-Input Shaft Front | 1 | No longer available - Call for replacement | ||
| 80 | 2803L1832 | Shim-Input Shaft Front Brg. Cap (.003") | 2 | No longer available - Call for replacement | ||
| 80 | 2803M1833 | Shim-Input Shaft Front Brg. Cap (.005") | 4 | No longer available - Call for replacement | ||
| 80 | 2803N1834 | Shim-Input Shaft Front Brg. Cap (.010") | 2 | No longer available - Call for replacement | ||
| 80 | 2803B1874 | Shim-Input Shaft Front Brg. Cap (.003") | 2 | $6.52 | Add to Cart | |
| 80 | 2803C1875 | Shim-Input Shaft Front Brg. Cap (.005") | 6 | No longer available - Call for replacement | ||
| 80 | 2803D1876 | Shim-Input Shaft Front Brg. Cap (.010") | 1 | No longer available - Call for replacement | ||
| 80 | 2803G1931 | Shim-Input Shaft Front Brg. Cap (.003") | 2 | $49.24 | Add to Cart | |
| 80 | 2803H1932 | Shim-Input Shaft Front Brg. Cap (.005") | 6 | $28.25 | Add to Cart | |
| 80 | 2803J1934 | Shim-Input Shaft Front Brg. Cap (.010") | 4 | $73.64 | Add to Cart | |
| 78 | 1844C809 | Spacer-Input Shaft | 1 | No longer available - Call for replacement | ||
| 109 | 25520 | Cup-Rear Output Shaft Rear Brg. | 1 | $11.01 | Add to Cart | |
| 110 | 25584 | Cone-Rear Output Shaft Rear Brg. | 1 | Call for availability | ||
| 108 | 1844S565 | Spacer-Rear Output Shaft | 1 | No longer available - Call for replacement | ||
| 108 | 1844J166 | Spacer-Rear Output Shaft | 1 | No longer available - Call for replacement | ||
| 113 | 25878 | Cone-Rear Output Shaft Forward Brg. | 1 | No longer available - Call for replacement | ||
| 114 | 25821 | Cup-Rear Output Shaft Forward Brg. | 1 | $15.99 | Add to Cart | |
| 115, 135 | 2803Z1846 | Shim-Rear Output Forward Brg. Cap And Idler | 4 | No longer available - Call for replacement | ||
| 115, 135 | 2803A1847 | Shim-Rear Output Forward Brg. Cap And Idler | 4 | No longer available - Call for replacement | ||
| 115, 135 | 2803B1848 | Shim-Rear Output Forward Brg. Cap And Idler | 8 | No longer available - Call for replacement | ||
| 124, 131 | 31521 | Cup-Idler Shaft Front And Rear Brg. | 2 | $42.16 | Add to Cart | |
| 125, 130 | 31597 | Cone-Idler Shaft Front And Rear Brg. | 2 | $25.00 | Add to Cart | |
| 127 | 1844L480 | Spacer-Idler Shaft Front Brg. | 1 | No longer available - Call for replacement | ||
| 130 | HM89449 | Cone-Idler Shaft Front Brg. | 1 | $28.33 | Add to Cart | |
| 131 | HM89411 | Cup-Idler Shaft Front Brg. | 1 | $37.72 | Add to Cart | |
| 151 | 1828V74 | Bearing-Output Shaft Front | 1 | $88.32 | Add to Cart | |
| 159 | 1828S149 | Bearing-Front Output Shaft Rear | 1 | Call for availability | ||
| 161 | 1244Q1629 | Spacer-Front Output Shaft | 1 | No longer available - Call for replacement | ||
| 70, 106, 122, 150, 162, 228 | 2297Z6656 | Silicone Gasket-3 Oz. Tube | 1 | $104.20 | Add to Cart | |
| 132 | 1829H788 | Washer-Idler Shaft Brg. | 1 | No longer available - Call for replacement |
T-223 Service Kit T-223-5: Capscrews/Washers/Nuts
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 1, 88, 94, 140 | 1227L714 | Nut-P.T.O. Shaft, Input Shaft, Rear Output Shaft | 4 | Call for availability | ||
| 6, 58 | S256P2 | Capscrew-P.T.O. Shaft Cap And Oil Pump To | 8 | $18.90 | Add to Cart | |
| 7, 59 | 1229E1669 | Washer-P.T.O. Shaft Cap And Oil Pump | 8 | $152.00 | Add to Cart | |
| 17 | 4X1521 | Stud-Shift Lever | 1 | Call for availability | ||
| 21 | 1829J244 | Washer-Shift Shaft | 1 | Call for availability | ||
| 22 | WA38 | Washer-Shift Lever Stud | 1 | Call for availability | ||
| 24 | NL281 | Nut-Shift Lever Stud | 1 | $76.00 | Add to Cart | |
| 26 | 26X56 | Lockscrew-Shift Fork | 1 | $112.20 | Add to Cart | |
| 30 | 3X161 | Screw-Shift Shaft Lock Ball | 1 | Call for availability | ||
| 38 | S2672 | Capscrew-Drive Clutch Retainer | 1 | $89.00 | Add to Cart | |
| 44, 211 | S2682 | Capscrew-Cage To T-Case, Case And Top Cover | 14 | $159.00 | Add to Cart | |
| 43, 45, 68, 83, 104, 117, 120, | 1229K1597 | Washer-Cage To T-Cage, P.T.O. Carrier To T-Case, | 67 | $135.00 | Add to Cart | |
| 46, 84, 103, 118, 119, 138, | S2691 | Capscrew-P.T.O. Carrier To T-Case, Input Shaft | 46 | Call for availability | ||
| 72 | 1829S721 | Washer-Input Shaft Rear Brg. | 1 | Call for availability | ||
| 75 | 1829P380 | Washer-Direct Drive Gear | 1 | Call for availability | ||
| 79C | 1229F3048 | Washer-Input Shaft Front | 1 | Call for availability | ||
| 79C | 1229F2814 | Washer-Input Shaft Front | 1 | Call for availability | ||
| 79C | 1229E3047 | Washer-Input Shaft Front | 1 | No longer available - Call for replacement | ||
| 87, 141 | 1829V100 | Washer-Input And Output Shaft | 2 | $4,470.00 | Add to Cart | |
| 87, 95 | 1229E1331 | Washer-Input Shaft And Rear Output Shaft Nut | 2 | No longer available - Call for replacement | ||
| 132 | 1829H788 | Washer-Idler Shaft Brg. | 1 | No longer available - Call for replacement | ||
| 142 | 10X830 | Capscrew-Oil Catcher | 1 | Call for availability | ||
| 153, 221, 222 | WA36 | Washer-Oil Catcher And Brake Pull Rod | 2 | $120.45 | Add to Cart | |
| 165, 213 | S26102 | Capscrew-Front Output Shaft Rear Cap And Case | 7 | $178.00 | Add to Cart | |
| 166 | 4X840 | Stud-Rear Output Shaft | 6 | Call for availability | ||
| 167 | N161 | Nut-Rear Output Shaft | 6 | No longer available - Call for replacement | ||
| 204, 209 | 26X54 | Lockscrew-Shift Fork | 2 | $25.43 | Add to Cart | |
| 225 | WA310 | Washer-Bellcrank Pin | 1 | $185.00 | Add to Cart | |
| 174 | 1829Z754 | Washer-Brake Oil Detector | 1 | Call for availability | ||
| 176, 185 | 1229E1513 | Washer-Bake Mounting Capscrew And Brake | 8 | $174.00 | Add to Cart | |
| 177 | S278A2 | Capscrew-Brake Mounting | 4 | $4.58 | Add to Cart | |
| 187 | S276D2 | Capscrew-Brake Drum | 4 | Call for availability | ||
| 245 | S166D2 | Capscrew-Brake Drum | 4 | Call for availability | ||
| 232 | WA39 | Washer-Brake | 1 | $675.00 | Add to Cart | |
| 231 | 1779Z260 | Nut-Lock | 1 | Call for availability |
T-223 Service Kit T-223-6: Main Case Miscellaneous Parts
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 75 | 1829P380 | Washer-Direct Drive Gear | 1 | Call for availability | ||
| 89, 102, 139 | K2412 | Cotter-Input Shaft Nut, Rear Output Shaft Nut, And | 3 | $131.00 | Add to Cart | |
| 89 | 1199M1105 | Bushing-Speed Driven Gear | 1 | No longer available - Call for replacement | ||
| 123 | 1854E187 | Snap Ring-Idler Shaft | 1 | $406.20 | Add to Cart | |
| 54 | K236 | Pin-Oil Drain | 1 | $124.00 | Add to Cart | |
| 156 | 1254M91 | Snap Ring-Front Output Shaft | 1 | Call for availability | ||
| 170 | 1854W257 | Snap Ring-Brake Hub | 1 | $107.60 | Add to Cart | |
| 192 | 1850T150 | Plug-Oil Drain | 1 | $66.20 | Add to Cart | |
| 204, 209 | 26X54 | Lockscrew-Shift Fork | 2 | $25.43 | Add to Cart | |
| 214 | 1846X284 | Dowels- T-Case And Cover | 2 | Call for availability | ||
| 215 | 1846B262 | Pin-Brake Bellcrank | 1 | Call for availability | ||
| 225 | WA310 | Washer-Bellcrank Pin | 1 | $185.00 | Add to Cart | |
| 225 | K248 | Cotter-Bellcrank Pin | 1 | $387.00 | Add to Cart | |
| 221, 222 | WA36 | Washer-Brake Pull Rod | 1 | $120.45 | Add to Cart | |
| 216, 218 | 1898E57 | Ball-Shift Shaft Lock | 2 | Call for availability | ||
| 217, 219 | 2858A1 | Spring-Shift Shaft Lock | 2 | $1,042.00 | Add to Cart | |
| 217, 219 | 2858C237 | Spring-Shift Shaft Lock | 2 | No longer available - Call for replacement | ||
| 217, 219 | 2858B236 | Spring-Shift Shaft Lock | 2 | Call for availability |
T-223 Service Kit T-223-7: Non-Asbestos Brake Kit (DLM 10" X 1-1/2")
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 179 | 2297L6720 | Roller-Brake | 1 | No longer available - Call for replacement | ||
| 180 | 2258Q719 | Spring-Brake Shoe Return | 4 | $7.03 | Add to Cart | |
| 181 | A63722L194 | Brake Shoe And Lining Assy. C | 2 | $259.70 | Add to Cart |
T-223 Service Kit T-223-8: DCM 10" X 3" Brake Kit
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 238 | 2758A53 | Spring-Brake Shoe Return | 1 | $121.00 | Add to Cart | |
| 231 | 1779Z260 | Nut-Lock | 1 | Call for availability | ||
| 235 | S289A2 | Capscrew-Brake Mounting | 4 | Call for availability |
T-223 MPS Shaft Assembly Kits
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 155 | A3297Q1369 | Shaft-Output Assy. | 1 | MPS 3831 Shaft-Output Assembly | $774.97 | Add to Cart |
| 158 | A3892E5465 | Shaft-Gear Assy. | 1 | MPS 3831 Shaft-Output Assembly | Call for availability | |
| 168 | PW225 | Expansion Plug-Front Output Shaft | 1 | MPS 3831 Shaft-Output Assembly | $150.00 | Add to Cart |
| 171 | PW252 | Expansion Plug-Brake Hub | 1 | MPS 3831 Shaft-Output Assembly | $118.00 | Add to Cart |
| 197B | 1898X258 | Elbow-High Oil Level | 1 | MPS 3831 Shaft-Output Assembly | Call for availability | |
| 170 | 1854W257 | Snap Ring-Brake Hub | 1 | MPS 3831 Shaft-Output Assembly | $107.60 | Add to Cart |
| 140 | 1227C939 | Nut-Output Shaft | 1 | MPS 3831 Shaft-Output Assembly | $35.52 | Add to Cart |
| 112 | 3297S1370 | Shaft-Output Assy. | 1 | MPS 4118 Shaft-Rear Drive Output | Call for availability | |
| 77 | 3297S1372 | Shaft-Input | 1 | MPS 4120 Shaft-Input | Call for availability | |
| 77 | 3297S1373 | Shaft-Input | 1 | MPS 4121 Shaft-Input | Call for availability | |
| 77 | 3297Y1374 | Shaft-Input | 1 | MPS 4122 Shaft-Input | Call for availability | |
| 77 | 3297Y1375 | Shaft-Input | 1 | MPS 4123 Shaft-Input | Call for availability | |
| 77 | 3297Y1376 | Shaft-Input | 1 | MPS 4124 Shaft-Input | Call for availability | |
| 14 | 3297Y1378 | Shaft-Output Assy. | 1 | MPS 4126 Shaft-P.T.O. | Call for availability | |
| 140 | 1227C939 | Nut-Output Shaft | 1 | MPS 4126 Shaft-P.T.O. | $35.52 | Add to Cart |
| 155 | A3297Q1369 | Shaft-Output Assy. | 1 | MPS 4217 Shaft-Output | $774.97 | Add to Cart |
| 158 | A3892E5465 | Gear-Output Assy. | 1 | MPS 4217 Shaft-Output | Call for availability |
T-221 Service Kit T-221-1: Main Case Seals
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 86, 96, 148, 160 | A1805E447 | Oil Seal-Input Shaft Front Brg. Cap, Rear Output | 4 | $35.41 | Add to Cart | |
| 160 | A1205Z1768 | Oil Seal-Front Output Shaft Rear | 1 | Call for availability | ||
| 200, 201 | A1205N1132 | Oil Seal-Shift Shaft | 2 | $41.40 | Add to Cart |
T-221 Service Kit T-221-3: Main Case Miscellaneous Parts
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 89, 102, 139 | K2412 | Cotter-Input Shaft Nut, Rear Output Shaft Nut And | 3 | $131.00 | Add to Cart | |
| 98 | 1199M1105 | Bushing-Speed Driven Gear | 1 | No longer available - Call for replacement | ||
| 100 | 1898U671 | Sleeve-Speed Driven Gear | 1 | Call for availability | ||
| 102 | K2410 | Cotter-Rear Output Shaft Nut | 1 | $239.00 | Add to Cart | |
| 154, 226, 227 | K236 | Pin-Oil Catcher And Brake Pull Rod | 2 | $124.00 | Add to Cart | |
| 216, 218 | 1898E57 | Ball-Shift Shaft Lock | 2 | Call for availability | ||
| 217, 219 | 2858A1 | Spring-Shift Shaft Lock | 2 | $1,042.00 | Add to Cart | |
| 217, 219 | 2858Q277 | Spring-Shift Shaft Lock | 1 | Call for availability |
T-221 Service Kit T-221-4: Main Case Fasteners
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 68, 83, 104, 117, 120, 137, | 1229K1597 | Washer-Input Shaft Front And Rear Brg. Cage, Rear | 36 | $135.00 | Add to Cart | |
| 68, 83, 104, 117, 120, 137, | WA16 | Washer-Input Shaft Front And Rear Brg. Cage, Rear | 36 | $144.00 | Add to Cart | |
| 72 | 1829X726 | Washer-Input Shaft Rear Brg. | 1 | Call for availability | ||
| 75 | 1829Y727 | Washer-Direct Drive Gear | 1 | Call for availability | ||
| 84, 146 | S26122 | Capscrew-Input Shaft Front Brg. Cap And Front | 6 | $1.74 | Add to Cart | |
| 88, 94, 140 | 1827H242 | Nut-Input Shaft, Rear Output Shaft And Output Shaft | 3 | Call for availability | ||
| 103 | S26142 | Capscrew-Rear Output Cap | 1 | Call for availability | ||
| 103 | 10X665 | Capscrew-Rear Output Cap | 1 | $2.65 | Add to Cart | |
| 130, 105 | S2691 | Capscrew-Rear Output Cap And Front Output Shaft | 6 | Call for availability | ||
| 104 | 1229E525 | Washer-Rear Output Cap | 1 | Call for availability | ||
| 118, 119, 138 | S2672 | Capscrew-Rear Output Forward Cap, Idler Shaft | 9 | $89.00 | Add to Cart | |
| 104 | N5121 | Nut-Output Shaft | 1 | Call for availability | ||
| 141 | 1229V1556 | Washer-Output Shaft | 1 | $36.30 | Add to Cart | |
| 156 | 1854P146 | Snap Ring-Front Output Shaft | 1 | Call for availability | ||
| 204, 209 | 26X54 | Lockscrew-Shift Fork | 2 | $25.43 | Add to Cart | |
| 213 | S26102 | Capscrew-Case Top Cover | 1 | $178.00 | Add to Cart | |
| 215 | 1846E265 | Pin-Brake Bellcrank | 1 | Call for availability | ||
| 225 | WA310 | Washer-Bellcrank Pin | 1 | $185.00 | Add to Cart | |
| 221, 222 | WA36 | Washer-Brake Pull Rod | 1 | $120.45 | Add to Cart | |
| 67, 84, 103, 165, 211 | S2682 | Capscrew-Input Shaft Front And Rear Brg. Cage, | 22 | $159.00 | Add to Cart |
T-221 Service Kit T-221-5: Non-Asbestos Brake Kit (DLM 7-1/4" X 1-1/2")
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 179 | 1779P94 | Roller-Brake | 2 | No longer available - Call for replacement | ||
| 180 | 2258Q719 | Spring-Brake Shoe Return | 2 | $7.03 | Add to Cart | |
| 181 | A133722T202 | Brake Shoe And Lining Assy. E | 2 | Call for availability |
T-223 Series Power Take Off
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 1 | 1227L714 | Nut-P.T.O. Shaft | 1 | H39, H44; 1.00"-20 slotted nut, 1.50" across flats, grade 8. | Call for availability | |
| 2 | K2412 | Cotter-P.T.O. Shaft Nut | 1 | H39, H44; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 3 | 1229E1331 | Washer-P.T.O. Shaft Nut | 1 | -; Not used on models in this book. | No longer available - Call for replacement | |
| 4 | 3897N1002 | Flange-Input | 1 | -; Not used on models in this book. | Call for availability | |
| 5 | A1805N352 | Oil Seal-P.T.O. Shaft | 1 | H39, H44; 2.44" O.D., 1.69" shaft, 0.32" wide, double lip, single case, with spring. | Call for availability | |
| 6 | S256P2 | Capscrew-P.T.O. Shaft Cap | 4 | H39, H44; 0.31"-18, 0.75" long, grade 8. | $18.90 | Add to Cart |
| 7 | 1229E1669 | Washer-P.T.O. Shaft Cap | 4 | -; Not used on models in this book, | $152.00 | Add to Cart |
| 8 | 1874A105 | Sleeve-P.T.O. Shaft Oil Seal | 1 | H39, H44; 1.69" O.D., 1.38" I.D., 0.94" wide. | Call for availability | |
| 9 | A3866S357 | Cap-P.T.O. Shaft | 1 | H39, H44; 4 holes on 3.75" bolt circle, 3.15" pilot. | Call for availability | |
| 10 | 2297Z6656 | Gasket-P.T.O. Shaft Cap | H39, H44; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 11 | 2803V568 | Shim-P.T.O. Shaft Cap | 3 | H39, H44; .003", use as required. | Call for availability | |
| 11 | 2803W569 | Shim-P.T.O. Shaft Cap | 3 | .005", use as required. | Call for availability | |
| 11 | 2803X570 | Shim-P.T.O. Shaft Cap | 5 | .010", use as required. | Call for availability | |
| 12 | 332 | Cup-P.T.O. Shaft Brg. Outer | 1 | H39, H44; 3.15" O.D. | $43.08 | Add to Cart |
| 13 | 335 | Cone-P.T.O. Shaft Brg. Outer | 1 | H39, H44; 1.38" bore. | Call for availability | |
| 14 | MPS4126 | Shaft-P.T.O. | 1 | H39, H44; 9.06" long, threaded one end, offset lobe in center, 1.38"-10T spline, 1.38"-6T spline, includes item 140. | Call for availability | |
| 14A | 3880X336 | Shaft-Tapered P.T.O. | 1 | -; Not used on models in this book. If used omit items 8 and 14. | Call for availability | |
| 14B | 16X40 | Key-Tapered P.T.O. Shaft | 1 | -; Not used on models in this book. | Call for availability | |
| 15 | 335 | Cone-P.T.O. Shaft Brg. Inner | 1 | H39, H44; 1.38" bore. | Call for availability | |
| 16 | 332 | Cup P.T.O. Shaft Brg. Inner | 1 | H39, H44; 3.15" O.D., included pin item 34. | $43.08 | Add to Cart |
| 17 | 4X1521 | Stud-Shift Lever | 1 | H39, H44; 0.50"-13/0.50"-20, 1.63" long, 0.13" drilled hole in 0.50"-20 thread, included in item 34. | Call for availability | |
| 18 | K238 | Cotter-Shift Lever | 1 | H39, H44; 0.09" diameter, 1.00" long. | $63.00 | Add to Cart |
| 19 | 2843C107 | Shaft-P.T.O. Shift | 1 | H39, H44; 0.31" diameter, 5.87" developed length. | Call for availability | |
| 20 | 2847E291 | Lever-Shift | 1 | H39, H44; 0.52"-3 holes, 0.44" diameter, 0.25" thick. | Call for availability | |
| 21 | 1829J244 | Washer-Shift Shaft | 1 | H39, H44; 0.94" O.D., 0.58" I.D., 0.03" thick. | Call for availability | |
| 22 | WA38 | Washer-Shift Lever Stud | 1 | H39, H44; 1.06" O.D., 0.53" I.D., 0.09" thick. | Call for availability | |
| 23 | K238 | Cotter-Shift Lever Stud | 1 | H39, H44; 0.09" diameter, 1.00" long. | $63.00 | Add to Cart |
| 24 | NL281 | Nut-Shift Lever Stud | 1 | H39, H44; Self locking nut 0.5"-13, 0.75" across flats, grade 8. | $76.00 | Add to Cart |
| 25 | 2849Y77 | Fork-P.T.O. Shaft | 1 | H39, H44; 0.27"-1 hole, 0.31"-24 UNF. | No longer available - Call for replacement | |
| 26 | 26X56 | Lockscrew-Shift Fork | 1 | H39, H44; 0.31"-24 thread, 0.53" long, slot head. | $112.20 | Add to Cart |
| 27 | A1805B158 | Oil Seal-P.T.O. Shift Shaft | 1 | H39, H44; Retainer, 0.81" O.D., 0.56" shaft, 0.12" wide, single lip, single case without spring, included in item 34. | $38.15 | Add to Cart |
| 28 | 1898C55 | Tag-Oil Instruction | 1 | H39, H44; 2.38" dia., yellow with black lettering. | Call for availability | |
| 29 | 1850T150 | Plug-P.T.O. Carrier | 1 | H39, H44; Male square head with 0.13" dia. hole. | $66.20 | Add to Cart |
| 30 | 3X161 | Screw-Shift Shaft Lockscrew | 1 | H39, H44; 0.38" -16, 0.31" long. | Call for availability | |
| 31 | 1229E421 | Lockwasher-Shift Lockscrew | 1 | H39, H44; Internal tooth type, 0.69" O.D., 0.04" thick. | Call for availability | |
| 32 | 2858T20 | Spring-Shift Lock Ball | 1 | H39, H44; 5.50 coils, 0.53" long, 0.31" O.D. | $969.90 | Add to Cart |
| 33 | 1898H34 | Ball-Shift Shaft Lock | 1 | H39, H44; 0.31" diameter. | $148.00 | Add to Cart |
| 34 | A3826Y285 | Carrier Assy.-P.T.O. Shaft Bearing Cage | 1 | H39, H44; 3826-D-394 cast, Includes items 16, 117, 27, and 36. | Call for availability | |
| 35 | 2297Z6656 | Gasket-P.T.O. Carrier To Brg. | H39, H44; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 36 | PW210 | Plug-Expansion | 1 | H39, H44; 0.625" O.D., 0.062" thick. Included in item 34. | Call for availability | |
| 37 | 2848J88 | Clutch-P.T.O. Sliding | 1 | H39, H44; 5 dog jaws, 2.75" O.D., 1.38"-6T spline, includes external shift groove. | No longer available - Call for replacement | |
| 38 | S2672 | Capscrew-Drive Clutch Retainer | 1 | H39, H44; 0.38"-16, 0.88" long, grade 8. | $89.00 | Add to Cart |
| 39 | 1229E421 | Lockwasher-Drive Clutch Retainer | 1 | H39, H44; Internal tooth type, 0.69" O.D., 0.04" thick. | Call for availability | |
| 40 | 1829D680 | Retainer-Drive Clutch | 1 | H39, H44; 0.41" diameter hole. | Call for availability | |
| 41 | 2848H86 | Clutch-P.T.O. Drive | 1 | H39, H44; 5 dog jaws, 2.25" O.D., 1.38"-6 spline. | Call for availability | |
| 42 | 3826X284 | Cage-Input Shaft Rear Brg. | 1 | H39, H44; 3826-X-326 cast, 6 drilled holes on 5.00" bolt circle, 6 tapped holes on 5.00" bolt circle, 1 angle drilled hole, open end. | Call for availability | |
| 43 | S2682 | Capscrew-Cage To T-Case | 6 | H39, H44; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart |
| 44 | 1229K1597 | Washer-Cage To T-Case | 6 | H39, H44; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 45 | 1229K1597 | Washer-P.T.O. Carrier To T-Case | 6 | H39, H44; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 46 | S2691 | Capscrew-P.T.O. Carrier To T-Case | 6 | H39, H44; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 47 | 1846V126 | Plunger-Oil Pump | 1 | H39, H44; 0.35" I.D., 0.74" O.D., 1.65" long. | Call for availability | |
| 48 | 2858W101 | Spring-Oil Pump Plunger | 1 | H39, H44; 11.2 coils, 1.75" long, 0.38" O.D. | Call for availability | |
| 49 | 2297Z6656 | Gasket-Oil Pump To Carrier | H39, H44; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 50 | A22847Q303 | Oil Pump-Body Assy. | 1 | H39, H44; 0.33"-4 mounting holes, 0.50"-20 UNF 2 holes. | Call for availability | |
| 51 | A1898W595 | Elbow-Oil Intake Tube To Fitting | 1 | H39, H44; 90 degree elbow, 0.38" tube, 0.25" pipe thread. | Call for availability | |
| 52 | A3897T1762 | Tube Assy.-Intake | 1 | H39, H44; Includes item 56. | Call for availability | |
| 53 | 1898H866 | Fitting-Oil Pump To Intake Elbow | 1 | H39, H44; 0.50"-20 thread, 1.19" long, 0.25" pipe thread. | Call for availability | |
| 54 | 1898Q251 | Ball-Inlet Check Valve | 1 | H39, H44; 0.34" diameter. | Call for availability | |
| 55 | 2858X102 | Spring-Check Valve | 1 | H39, H44; 3 coils 0.49" long, 0.41" diameter. | $31.85 | Add to Cart |
| 56 | 1898G241 | Connector-Oil Pump Intake Tube | 1 | H39, H44; Included in item 52. | Call for availability | |
| 57 | 1898J868 | Fitting-Intake Tube To Case | 1 | H39, H44; 0.75" dia. 0.25"-18 N.P.T.F., 1.00" long. | Call for availability | |
| 58 | S256P2 | Capscrew-Oil Pump To P.T.O. Carrier | 4 | H39, H44; 0.31"-18, 0.75" long, grade 8. | $18.90 | Add to Cart |
| 59 | 1229E1669 | Washer-Oil Pump To P.T.O. Carrier | 4 | H39, H44; 0.62" O.D., 0.34" I.D., 0.06" thick. | $152.00 | Add to Cart |
| 60 | 1228K37 | Ball-Pump Outlet Check Valve | 1 | H39, H44; 0.37" diameter. | $21.00 | Add to Cart |
| 61 | 2858X102 | Spring-Check Valve | 1 | H39, H44; 3 coils 0.48" long, 0.41" diameter. | $31.85 | Add to Cart |
| 62 | 1898K531 | Fitting-Oil Outlet Tube To Pump | 1 | H39, H44; 0.50"-20 thread, 1.00" long, 24 thread. | $12.05 | Add to Cart |
| 63 | 1898J504 | Connector-Oil Pump Outlet Tube | 1 | H39, H44; Included in item 64. | Call for availability | |
| 64 | A2847R642 | Tube Assy.-Outlet | 1 | H39, H44; Includes items 63 and 65. | Call for availability | |
| 65 | 1898J504 | Connector-Oil Pump Outlet Tube | 1 | H39, H44; Included in item 64. | Call for availability | |
| 66 | 1898L532 | Elbow-Oil Pump Outlet Tube | 1 | H39, H44; 0.44"-13 thread 0.90" long, 24 thread. | $23.70 | Add to Cart |
T-223 Series Main Case
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 67 | S2682 | Capscrew-Input Shaft Rear Bearing Cage | 6 | All; 0.38"-16, 1.12" long, grade 8. | $159.00 | Add to Cart |
| 68 | 1229K1597 | Washer-Input Shaft Rear Bearing Cage | 6 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 69 | 3838N196 | Cage-Input Shaft Rear Brg. | 1 | All except transfer cases equipped with PTO. 3828-Y-311 cast, 6 drilled holes on 5.00" bolt circle, 2 tapped holes on 5.00" bolt circle, 2 inside angle drilled holes, closed. | $781.11 | Add to Cart |
| 70 | 2297Z6656 | Gasket-Input Shaft Rear Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 71 | 1228S409 | Bearing-Input Shaft Rear | 1 | See remarks; 0.53" diameter, 8 balls. Replace with items 71A and 71B. | Call for availability | |
| 71A | 332 | Cup-Input Shaft Rear | 1 | All; 3.15" O.D. | $43.08 | Add to Cart |
| 71B | 339 | Cone-Input Shaft Rear | 1 | All; 1.38" bore. | $61.48 | Add to Cart |
| 72 | 1829S721 | Washer-Input Shaft Rear Brg. | 1 | All; 2.31" O.D., 1.39" I.D., 0.16" thick. | Call for availability | |
| 73 | 1825R200 | Bushing-Direct Drive Gear | 1 | All; 1.75" O.D., 1.61" I.D., 1.78" wide, split, 2 holes and 4 grooves, included in item 74, not sold separately. Non-serviceable item. Must service with direct drive gear only | Call for availability | |
| 74 | A3892J1544 | Gear Assy.-Direct Drive (1.87-1) | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99,; 27T, includes item 73, standard, L.H. Helical, 5.23" O.D., includes 17T spline, available as assembly only. | Call for availability | |
| 74 | A3892W1635 | Gear Assy.-Direct Drive (2.05-1) | 1 | A103, A104, A105, C20, C22, C29, C30, C32, C34,; 27T, includes item 73, standard, L.H. Helical, 5.23" O.D., includes 16T spline. | $1,284.87 | Add to Cart |
| 74 | A3892R1604 | Gear Assy.-Direct Drive (2.25-1) | 1 | C41, C43, C44, E22, E23, M4; 27T, includes item 73, standard, L.H. Helical, 5.23" O.D., includes 15T spline. | Call for availability | |
| 74 | A3892L1806 | Gear Assy.-Direct Drive (2.00-1) | 1 | All others; 27T, includes item 73, heavy duty, R.H. Helical, 5.23" O.D., spur, 14T spline, 3.22" I.D., available as assembly only. | $1,381.89 | Add to Cart |
| 75 | 1829P380 | Washer-Direct Drive Gear | 1 | All; 2.38" O.D., 1.64" I.D., 0.18" thick with 4 slots. | Call for availability | |
| 76 | 3892Z2444 | Gear-Low Speed Sliding (1.87-1) | 1 | A84, A88, A89, A90, A91, A94, A103, A104, A105; 17T, spur, standard, 3.71" O.D., 15T spline, with shift groove. | Call for availability | |
| 76 | 3892Y2443 | Gear-Low Speed Sliding (2.05-1) | 1 | A98, A99, C20, C22, C29, C30, C41, C43, C44; 16T, spur, standard, 3.48" O.D., 15T spline, with shift groove. | $1,017.95 | Add to Cart |
| 76 | 3892X2442 | Gear-Low Speed Sliding (2.25-1) | 1 | C31, C32, C34, E22, E23, M4; 15T, spur, standard, 3.29" O.D., 15T spline, with shift groove. | Call for availability | |
| 76 | 3892W2441 | Gear-Low Speed Sliding (2.00-1) | 1 | All others; 14T, spur, heavy duty, 3.71" O.D., 15T spline, with shift groove. | $1,392.19 | Add to Cart |
| 77 | MPS4122 | Shaft-Input (Continued) | 1 | A84, A88, A90, A91, A92, A94, A98, A99, A103, A104, A105, C22, E22, E23; 12.00" long, 4 splines, 2- 2.00"-15T, 1 spline 1.37"-6T, 1 spline 1.50"-10T, Input bearing journal 1.57", induction harden spline 1.47". high gear thick/ thin over all dimension 1.91", input spline 1.50" diameter, 12.13" long, includes item 88. | Call for availability | |
| 77 | MPS4124 | Shaft-Input | 1 | A89; 12.00" long, 4 splines, 2- 2.00"-15T, 1 spline 1.37"-6T, 1 spline 1.50"-10T, No induction hardening on spline, input bearing journal 1.57", includes item 88. | Call for availability | |
| 77 | MPS4120 | Shaft-Input | 1 | A94, C20, C29, C30, C31, C32, C41, C43, C44; 12.00" long, 4 splines, 2- 2.00"-15T, 1 spline 1.37"-6T, 1 spline 1.50"-10T, Input bearing journal 1.34" diameter induction harden spline length 3.25", includes item 88. | No longer available - Call for replacement | |
| 77 | MPS4123 | Shaft-Input | 1 | M4; Same as MPS4122 except high gear thick/thin spline over all dimension 1.78", includes item 88. | Call for availability | |
| 77 | MPS4121 | Shaft-Input | 1 | All others; 12.13" long, 4 splines, 2- 2.00"-15T, 1 spline 1.75"-10T, 1 spline 1.37"-6T, Induction harden 1.47" in thick spline area, input bearing journal 1.75", input spline 1.75", includes item 88. | Call for availability | |
| 78 | 1844C809 | Spacer-Input Shaft | 1 | A89; 1.94" O.D., 1.59" I.D., 0.77" wide. | No longer available - Call for replacement | |
| 79 | 1228R408 | Bearing-Input Shaft Front | 1 | See remarks; 0.69" diameter, 8 balls. | Call for availability | |
| 79A | 357 | Cone-Input Shaft Front | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105, C22, E22, E23, M4; 1.57" I.D. | Call for availability | |
| 79A | 376 | Cone-Input Shaft Front | 1 | All others; 1.77" I.D. | Call for availability | |
| 79B | 353 | Cup-Input Shaft Front | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105, C22, E22, E23, M4; 3.54" O.D. | Call for availability | |
| 79B | 372 | Cup-Input Shaft Front | 1 | All others; 3.94" O.D. | Call for availability | |
| 79C | 1229F3048 | Washer-Input Shaft Front | 1 | A84, A88, A89, A90, A91, A92, A98, A99, A103, A104, A105, C22, E22, E23, M4; 1.84" O.D., 1.51" I.D., 0.06" thick. | Call for availability | |
| 79C | 1229F2814 | Washer-Input Shaft Front | 1 | C20, C29, C30, C31, C34, C41 C43, C44; 2.12" O.D., 1.51" I.D., 0.125" thick. | Call for availability | |
| 79C | 1229E3047 | Washer-Input Shaft Front | 1 | All others; 2.06" O.D., 1.76" I.D., 0.13" thick. | No longer available - Call for replacement | |
| 80 | 2803L1832 | Shim-Input Shaft Front Bearing Cap | 2 | A84, A88, A89, A90, A91, A92,; .003", use as required, 3.60" I.D., 2 notches 168 degrees apart. | No longer available - Call for replacement | |
| 80 | 2803M1833 | Shim-Input Shaft Front Bearing Cap | 2 | A94, A99, A103, A104,; .005", use as required, 3.60" I.D., 2 notches 168 degrees apart. | No longer available - Call for replacement | |
| 80 | 2803N1834 | Shim-Input Shaft Front Bearing Cap | 4 | A105, C22, E22, E23; .010", use as required, 3.60" I.D., 2 notches 168 degrees apart. | No longer available - Call for replacement | |
| 80 | 2803B1874 | Shim-Input Shaft Front Bearing Cap | 2 | M4; .003", use as required, 3.60" I.D., 2 notches 85 degrees apart. | $6.52 | Add to Cart |
| 80 | 2803C1875 | Shim-Input Shaft Front Bearing Cap | 6 | .005", use as required, 3.60" I.D., 2 notches 85 degrees apart. | No longer available - Call for replacement | |
| 80 | 2803D1876 | (Continued) | 1 | .010", use as required, 3.60" I.D., 2 notches 85 degrees apart. | No longer available - Call for replacement | |
| 80 | 2803G1931 | Shim-Input Shaft Front Bearing Cap (Continued) | 2 | All others; .003", use as required, 4" I.D., 5.25" O.D. | $49.24 | Add to Cart |
| 80 | 2803H1932 | Shim-Input Shaft Front Bearing Cap (Continued) | 6 | .005", use as required, 4" I.D., 5.25" O.D. | $28.25 | Add to Cart |
| 80 | 2803J1934 | Shim-Input Shaft Front Bearing Cap (Continued) | 4 | .010", use as required, 4" I.D., 5.25" O.D. | $73.64 | Add to Cart |
| 81 | A3866S721 | Cap Assy-Input Shaft Front Bearing Cap | 1 | A84, A88, A89, A90, A91, A92, A94, A99, A103, A104, C22, E22, E23; 3866-B-1250 cast, includes item 86 (R-408), cast in oil slots about 168° apart, 4.25" bolt circle, 6 holes, 2.87" seal bore, 3.55" bearing bore, available as assembly only. | Call for availability | |
| 81 | A3866Y935 | Cap Assy-Input Shaft Front Bearing Cap | 1 | A85, A98, A105; 3866-B-1250 cast, includes item 86 (R-408), same as S-721 except has 1 drilled thru hole 0.13"-27 N.P.S.F. tap thread, available as assembly only. | Call for availability | |
| 81 | A13866X804 | Cap Assy-Input Shaft Front Bearing Cap | 1 | C20, C29, C31, C32, C41, C43, C44, H46, H47, H48; 3866-Z-1274 cast, same as A-3866-X-804 except item 86 is A-1205-T-1242. | Call for availability | |
| 81 | 3866C757 | Cap Assy-Input Shaft Front Bearing Cap | 1 | M4; 3866-C-757 cast, uses item 86 (R-408), cast in oil slots approx. 67 degrees apart, 4.25" bolt circle, 6 holes, 2.87" seal bore, 3.55" bearing bore. | Call for availability | |
| 81 | A3866X804 | Cap Assy-Input Shaft Front Bearing Cap | 1 | All others; 3866-Z-1274 cast, includes item 86 (A-573). 0.13" tapped hole, 4.75" bolt circle, 6 holes 3.00" seal bore, 3.94" bearing bore. | Call for availability | |
| 82 | P42 | Plug-Input Shaft Front Bearing Cap | 1 | A98, A99, A104, A105, C20, C29, C30, C31, C32, C34, C41, C43, C44, H31, H33, H36, H40, H41, H46, H47, H48, H52, H53, H54, H55, H56, H57; Hex socket-female, 0.125"-27 thread. | $135.00 | Add to Cart |
| 83 | 1229K1597 | Washer-Input Shaft Front Bearing Cap | 6 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 84 | S2691 | Capscrew-Input Shaft Front Bearing Cap | 6 | All; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 85 | PW226 | Plug-Input Shaft Shipping Cover | 1 | N4, N7; 1.63" O.D. No longer available. | Call for availability | |
| 86 | A1805R408 | Oil Seal-Input Shaft Front Bearing Cap | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A104, A105, C22, E22, E23, M4; 2.87" O.D., 2.12" shaft, double lip, double or single case with 8 spring, 0.44" wide. | $98.54 | Add to Cart |
| 86 | A1205T1242 | Oil Seal-Input Shaft Front Bearing Cap | 1 | C20, C29, C30, C31, C32, C34, C41; 3.00" seal O.D., 0.50" wide, 2.13" shaft, double lip, double case with spring. | $72.30 | Add to Cart |
| 86 | A1805A573 | Oil Seal-Input Shaft Front Bearing Cap | 1 | All others; 3.00" seal O.D., 0.48" wide, 2.25" shaft, double lip, double case, with spring, replaces A-1805-S-409 with single lip. | $91.68 | Add to Cart |
| 86A | 1229F2814 | Washer, Thrust | 1 | C41, C43, C44; 2.12" O.D., 1.51" I.D., 0.125" thick. | Call for availability | |
| 86A | 1229F3048 | Washer, Thrust | 1 | A103, A104, A105; 1.84" O.D., 1.51" I.D., 0.06" thick. | Call for availability | |
| 87 | 1829V100 | Washer-Input Shaft | 1 | A84, A88, A89, A90, A91, A92, A103, C20, C29, C30, C31, C32, C41, C43, C44, E22, E23, M4; 1.75" O.D., 1.03" I.D., 0.16" thick. | $4,470.00 | Add to Cart |
| 87 | 1829M585 | Washer-Input Shaft | 1 | H56, H57; 2.00" O.D., 1.02" I.D., 0.250" thick. | Call for availability | |
| 87 | 1229C4553 | Washer-Input Shaft | 1 | H52; 1.48" O.D., 0.823" I.D., 0.217" thick. | $38.32 | Add to Cart |
| 87 | 1229E1331 | Washer-Input Shaft | 1 | All others; 1.81" O.D., 0.25" thick, 1.03" I.D. | No longer available - Call for replacement | |
| 88 | 1227C939 | Nut-Input Shaft | 1 | All; 1.00"-20, 1.312" width across flats, included in item 77. | $35.52 | Add to Cart |
| 89 | K2412 | Cotter-Input Shaft Nut | 1 | All; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 90 | 2847P640 | Deflector-Input Yoke | 1 | -; Not used on 223 models in this book. | Call for availability | |
| 91 | 3897L1962 | Flange/Yoke-Input | 1 | A89; 1600 flange, 1.50"-10T spline, 8 holes on 6.13" bolt circle. | Call for availability | |
| 91 | 3897Z1794 | Flange/Yoke-Input | 1 | A90; 7C yoke, 4 holes, 4.63" apart, 1.50"-10T spline. | Call for availability | |
| 91 | 2WCS2481 | Flange/Yoke-Input | 1 | A91; 1550 flange, 4 holes 0.56" at 80/100°, 4.75" bolt circle, 1.50"-10T spline. | Call for availability | |
| 91 | 3897Q1369 | Flange/Yoke-Input | 1 | A92; 1350/1410 flange, 4 holes at 80/100°, 3.75" bolt circle, 1.50"-10T spline. | Call for availability | |
| 91 | 2WCS2443 | Flange/Yoke-Input | 1 | C20, M4; 1500 flange, 4 holes 0.25" at 80/100°, 4.75" bolt circle, 1.50"-10T spline. | Call for availability | |
| 91 | 3897K1441 | Flange/Yoke-Input | 1 | C34; 1410 yoke, 4.22" long, drilled holes for mounting u-joint. | Call for availability | |
| 91 | 3897L1728 | Flange/Yoke-Input | 1 | E23; 1550 yoke, 1.50"-10T spline, 4 tapped holes 0.31"-24 UNF on 2.07" bolt circle. | Call for availability | |
| 91 | 3897P1966 | Flange/Yoke-Input | 1 | H41; 1480 yoke, 4 holes, 3.69" apart, 1.75"-10T spline. | Call for availability | |
| 91 | 3280S7897 | Flange/Yoke-Input | 1 | H47, H55, H56; 1550 yoke, 1.75"-10T spline, 4 holes 0.45" diameter. | Call for availability | |
| 91 | 3897J1440 | Flange/Yoke-Input | 1 | H52; 4.22" long, drilled holes for mounting u-joint. | Call for availability | |
| 91 | 3897R1370 | Flange/Yoke-Input | 1 | H57; 1410/ 1480 flange, 4 holes at 80/100°, 3.75" bolt circle, 1.75"-10T spline. | Call for availability | |
| 92 | 3897K1961 | Flange/Yoke-Rear Output | 1 | A89; 1600 flange, 1.75"-10T spline, 8 holes on 6.13" bolt circle, 2.25" seal O.D. | Call for availability | |
| 92 | 3897Y1793 | Flange/Yoke-Rear Output | 1 | A90; 7C/ 72N yoke, 4 holes, 4.63" apart, 1.75"-10T spline. | Call for availability | |
| 92 | 3260H1256 | Flange/Yoke-Rear Output | 1 | A91, A103; 1550 flange, 4 holes 0.56" at 80/100°, 4.75" bolt circle, 1.75"-10T spline. | Call for availability | |
| 92 | 3897R1370 | Flange/Yoke-Rear Output | 1 | A92, H57; 1410/ 1480 flange, 4 holes at 80/100°, 3.75" bolt circle, 1.75"-10T spline. | Call for availability | |
| 92 | 2WCS2832 | Flange/Yoke-Rear Output | 1 | C20, M4; 1500 flange, 4 holes 0.25" at 80/100°, 4.75" bolt circle, 1.75"-10T spline. | Call for availability | |
| 92 | 3897J1440 | Flange/Yoke-Rear Output | 1 | C34, H52; 4.22" long, drilled holes for mounting u-joint. | Call for availability | |
| 92 | 3897M1729 | Flange/Yoke-Rear Output | 1 | E23; 1550 yoke, 1.75"-10T spline, 4 tapped holes 0.31"-24 UNF on 2.07" bolt circle. | Call for availability | |
| 92 | 3897P1966 | Flange/Yoke-Rear Output | 1 | H41; 1480 yoke, 4 holes, 3.68" apart, 1.75"-10T spline. | Call for availability | |
| 92 | 3280S7897 | Flange/Yoke-Rear Output | 1 | H47; 1550 yoke, 1.75"-10T spline, 4 holes 0.45" diameter. | Call for availability | |
| 93 | 2847P640 | Deflector-Rear Output Yoke | 1 | -; Not used on 223 models in this book. | Call for availability | |
| 93 | 2847S617 | Deflector-Rear Output Yoke | 1 | A98, A99, A104, A105, C41; 4 holes 0.47" on 4.31" bolt circle, 2 slots 0.23". | Call for availability | |
| 94 | 1227C939 | Nut-Rear Output Shaft | 1 | All; 1.00"-20, 1.312" width across flats, included in item 112. | $35.52 | Add to Cart |
| 95 | 1829M585 | Washer-Rear Output Shaft Nut | 1 | A103, H55, H56, H57; 2.00"O.D., 1.02" I.D., 0.250" thick. | Call for availability | |
| 95 | 1229C4553 | Washer-Rear Output Shaft Nut | 1 | H52; 1.48" O.D., 0.823" I.D., 0.217" thick. | $38.32 | Add to Cart |
| 95 | 1229E1331 | Washer-Rear Output Shaft Nut | 1 | All others; 1.81" O.D., 1.03" I.D., 0.25" thick. | No longer available - Call for replacement | |
| 96 | A1805A573 | Oil Seal-Rear Output Shaft | 1 | All; 3.00" seal O.D., 0.44" width, 2.25" shaft, double lip, double case, with spring, included in item 97, replaces A-1805-S-409 with single lip only, available as assembly only. | $91.68 | Add to Cart |
| 97 | A3866E733 | Cap Assy.-Rear Output Shaft | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105, C20, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, H53, M4; 3866-F-1254 cast, 3 holes on 4.50" bolt circle, 4th hole 2.56" from center, open end, includes item 96 and 98, available as assembly only. | Call for availability | |
| 97 | A3866G891 | Cap Assy.-Rear Output Shaft | 1 | All others; 3866-E-733 cast, includes item 96 and 98, same as E-733 except add 0.13"-27 N.P.S.F. threaded hole. | Call for availability | |
| 98 | 1199M1105 | Bushing-Speedometer Driven Gear | 1 | All; Flanged, 0.44" flange O.D., 0.03" flange width, 0.31" O.D., 0.25" I.D., 0.34" wide, included in item 97. | No longer available - Call for replacement | |
| 99 | 1898V776 | Gear-Speedometer Driven | 1 | A84, A88, A89, A98, A99, A104, C20, C34, E23, H33, H39, H40, H42, H52, H55, H57, M4; 14T, Helical, 0.73" O.D., 0.38" wide, speedometer gear on shaft. | Call for availability | |
| 99 | 3891C1849 | Gear-Speedometer Driven | 1 | A91, A103; 15T, Helical, 0.73" O.D., 0.50" wide, speedometer gear on shaft. | $132.13 | Add to Cart |
| 100 | 1898U671 | Sleeve-Speedometer Driven Gear | 1 | A84, A88, A89, A99, A104, C20, E23, H33, H39, M4; 0.38" thru-hole, 0.88"-18 NS male thread one end, 0.81"-20 UNEF male thread other end, 0.88" nut. | Call for availability | |
| 100 | 1199N1106 | Sleeve-Speedometer Driven Gear | 1 | A91, A103; 0.47" thru-hole, 0.88"-18 NS male thread one end, 0.50" O.D., 0.81"-20 UNEF male thread other end, 0.41" I.D. | $299.81 | Add to Cart |
| 100 | 2245X50 | Sleeve-Speedometer Driven Gear | 1 | C34, H40, H47, H52, H55, H57; 0.31" thru-hole, 0.88"-18 NS male thread one end, 0.81"-20 UNEF male thread other end, 0.88" nut. | Call for availability | |
| 101 | A1850R18 | Plug-Speedometer Hole | 1 | A85, A90, A92, A98, A99, A105, C29, C30, C31, C32, C41, C43, C44, H41, H43, H44, H48, H53, H56; Metal threaded plug, replaces 1850-Z-104 plastic plug. | $19.43 | Add to Cart |
| 102 | K2412 | Cotter-Rear Output Shaft Nut | 1 | All; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 103 | S2691 | Capscrew-Rear Output Cap | 4 | All; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 104 | 1229K1597 | Washer-Rear Output Cap | 4 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 105 | A1199C1043 | Breather-Rear Output Shaft Rear | 1 | A98, A99, A104, A105, C29, C30, C30, C31, C32, C34, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48; 0.13"-27 N.P.T.F., 1.03" long. | $127.20 | Add to Cart |
| 106 | 2297Z6656 | Gasket-Rear Output Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 107 | 1898S799 | Gear-Speedometer Drive | 1 | A84, A88, A89, A91, A99, A103, A104, C23, C29, C30, C31, C32, C34, C41, C43, C44, H33, H39, H40, H47, H52, H53, H55, H56, H57, M4; 4T, Helical, 2.22" O.D., 1.75" I.D., 0.75" wide. | Call for availability | |
| 108 | 1844S565 | Spacer-Rear Output Shaft | 1 | A85, A92, A98, E22, H41; 2.13" O.D., 1.76" I.D., 1.18" wide. | No longer available - Call for replacement | |
| 108 | 1844J166 | Spacer-Rear Output Shaft | 1 | A84, A88, A89, A91, A99, A103, A104, C23, C29, C30, C31, C32, C34, C41, C43, C44, H33, H39, H40, H47, H52, H53, H55, H57, M4; 2.13" O.D., 1.76" I.D., 0.42" wide. | No longer available - Call for replacement | |
| 109 | 25520 | Cup-Rear Output Shaft Rear Bearing | 1 | All; 3.27" O.D. | $11.01 | Add to Cart |
| 110 | 25584 | Cone-Rear Output Shaft Rear Bearing | 1 | All; 1.71" bore. | Call for availability | |
| 111 | 3892P1550 | Gear-Rear Output Shaft | 1 | All; 27T, L.H. Helical, 5.83" O.D., 1.79"-10T spline. | Call for availability | |
| 112 | MPS4118 | Shaft-Rear Output | 1 | All; 11.5" long, threaded one end, 1.75"-10T spline, 2.00"-10T spline, includes item 94. | Call for availability | |
| 113 | 25878 | Cone-Rear Output Shaft Forward Bearing | 1 | All; 1.38" bore. | No longer available - Call for replacement | |
| 114 | 25821 | Cup-Rear Output Shaft Forward Bearing | 1 | All; 2.88" O.D. | $15.99 | Add to Cart |
| 115 | 2803Z1846 | Shim-Rear Output Forward | 2 | All; .003", use as required. | No longer available - Call for replacement | |
| 115 | 2803A1847 | Bearing | 2 | .005", use as required. | No longer available - Call for replacement | |
| 115 | 2803B1848 | Bearing | 4 | .010", use as required. | No longer available - Call for replacement | |
| 116 | 3866C731 | Cap-Rear Output Forward | 1 | All; Stamping, 4 holes, 3.63" bolt circle, no flats, on O.D., replaces 3866-S-773 with 2 flats on O.D. | Call for availability | |
| 117 | 1229K1597 | Washer-Rear Output Forward Cap | 4 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 118 | S2691 | Capscrew-Rear Output Forward Cap | 4 | All; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 119 | S2691 | Capscrew-Idler Shaft Rear Cap | 4 | All; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 120 | 1229K1597 | Washer-Idler Shaft Rear Cap | 4 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 121 | 3866N794 | Cap-Idler Shaft Rear | 1 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; 3866-M-819 cast, round O.D. with scallop and 2 flats on O.D., 4 holes, 3.63" bolt circle, closed end. | Call for availability | |
| 121 | 3866C731 | Cap-Idler Shaft Rear | 1 | All others; Stamping, 4 holes, 3.63" bolt circle, with no flats on O.D., replaces 3866-S-773 with 2 flats on O.D., closed end. | Call for availability | |
| 122 | 2297Z6656 | Gasket-Idler Shaft Rear Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 123 | 1854E187 | Snap Ring-Idler Shaft | 1 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H54, H55, H56, H57; Fits over 1.44" diameter shaft. | $406.20 | Add to Cart |
| 124 | 31521 | Cup-Idler Shaft Rear Brg. | 1 | All; 3.00" O.D. | $42.16 | Add to Cart |
| 125 | 31597 | Cone-Idler Shaft Rear Brg. | 1 | All; 1.44" bore. | $25.00 | Add to Cart |
| 126 | 3892C1641 | Gear-Idler Shaft | 1 | All; 28T, R.H., Helical, 5.41" O.D., includes 1.88"-10T spline. | No longer available - Call for replacement | |
| 127 | 1844L480 | Spacer-Idler Shaft Gear | 1 | All; 2.50" O.D., 1.94" I.D., 1.28" wide. | No longer available - Call for replacement | |
| 128 | 3892B1640 | Gear-Low Speed (1.87-1) | 1 | A84, A88, A89, A90, A91, A94, A98, A99, A103, A104, A105; 33T, standard, spur 6.88" O.D., includes 1.88"-10T spline. | Call for availability | |
| 128 | 3892Y1637 | Gear-Low Speed (2.05-1) | 1 | A92, A94, A95, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44; 34T, standard, spur 7.08" O.D., includes 1.88"-10T spline. | No longer available - Call for replacement | |
| 128 | 3892T1606 | Gear-Low Speed (2.25-1) | 1 | A94, E22, E23, M4; 35T, standard, spur 7.28" O.D., includes 1.88"-10T spline. | Call for availability | |
| 128 | 3892K1805 | Gear-Low Speed (2.00-1) | 1 | All others; 29T, heavy duty, spur 7.06" O.D., includes 1.88"-10T spline. | Call for availability | |
| 129 | 3880U723 | Shaft-Idler | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, M4; 7.30" long, 1.44" bearing diameter both ends, 1.88"-10T spline. Reference TSA-4-43 for further technical information. | No longer available - Call for replacement | |
| 129 | 3880A807 | Shaft-Idler | 1 | All others; 7.50" long, 1.44" bearing diameter both ends, 1.88"-10T spline. | No longer available - Call for replacement | |
| 130 | 31597 | Cone-Idler Shaft Front Brg. | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, H46, H47, H48, M4; 1.38" I.D. bore. | $25.00 | Add to Cart |
| 130 | HM89449 | Cone-Idler Shaft Front Brg. | 1 | All others; 1.44" bore. | $28.33 | Add to Cart |
| 131 | 31521 | Cup-Idler Shaft Front Brg. | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, H46, H47, H48, M4; 0.94" long, 3.00" O.D. | $42.16 | Add to Cart |
| 131 | HM89411 | Cup-Idler Shaft Front Brg. | 1 | All others; 0.91" long, 3.00" O.D. | $37.72 | Add to Cart |
| 132 | 1829H788 | Washer-Idler Shaft Brg. | 1 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; 1.75" O.D., 0.19" thick, with 2 holes 0.39" diameter on 0.88" bolt circle. | No longer available - Call for replacement | |
| 133 | 10X1292 | Capscrew-Idler Shaft Brg. Washer | 2 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; 0.38"-16, 0.88" long, grade 8, 1 hole drilled in head. | Call for availability | |
| 134 | LW163 | Lockwire-Idler Shaft Brg. Washer | 1 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; 16 gage, 3.00" long. . | Call for availability | |
| 135 | 2803Z1846 | Shim-Idler Shaft Front Brg. | 2 | All; .003", use as required. | No longer available - Call for replacement | |
| 135 | 2803A1847 | Cap | 2 | .005", use as required. | No longer available - Call for replacement | |
| 135 | 2803B1848 | Cap | 4 | .010", use as required. | No longer available - Call for replacement | |
| 136 | 3866C731 | Cap-Idler Shaft Front Brg. | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A103, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, M4; Stamping, 4 holes, 3.63" bolt circle, no flats on O.D., replaces 3866-S-773 2 flats on O.D. | Call for availability | |
| 136 | 3866N794 | Cap-Idler Shaft Front Brg. | 1 | All others; 3866-M-819 rough part, round O.D. with scallops, 2 flats, 4 holes on 3.63" bolt circle closed cap. | Call for availability | |
| 137 | 1229K1597 | Washer-Idler Shaft Front Brg. | 4 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 138 | S2691 | Capscrew-Idler Shaft Front Bearing | 4 | All; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 139 | K2412 | Cotter-Output Shaft Nut | 1 | All; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 140 | 1227C939 | Nut-Output Shaft | 1 | All; 1.00"-20, 1.312" width across flats, included in items 14 and 155. | $35.52 | Add to Cart |
| 141 | 1829V100 | Washer-Output Shaft | 1 | All; 1.75" O.D., 1.03" I.D., 0.16" thick. | $4,470.00 | Add to Cart |
| 142 | 10X830 | Capscrew-Oil Catcher | 1 | C20, C29, C30, C31, C32, C34, C41, C43, C44, H29, H32, H33, H36, H39, H44, H46, H48, H53, H54, H56; 0.38"-16, 1.87" long, grade 8. | Call for availability | |
| 143A | NL261 | Locknut, Oil Catcher Capscrew | 1 | C41, C43, C44, H53, H54, H56; 0.38"-16 thread, 0.56" width across flats, grade 8. | $102.00 | Add to Cart |
| 143 | 1229K1597 | Washer-Front Brg. Cap | 1 | C20, H29, H32, H33, H36, H39, H44; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 144 | 3897Z1794 | Flange/Yoke-Front Output | 1 | A90; 7C yoke, 4 holes 4.63" apart, 1.50"-10T spline. | Call for availability | |
| 144 | 2WCS2481 | Flange/Yoke-Front Output | 1 | A91, A103; 1550 flange, 1.50"-10T spline, 4 holes 0.56" at 80/100°, 4.75" bolt circle dia. | Call for availability | |
| 144 | 3897Q1369 | Flange/Yoke-Front Output | 1 | A92, H57; 1350/ 1410 flange, 4 holes at 80/100°, 3.75" bolt circle, 1.50-10T spline. | Call for availability | |
| 144 | 2WCS2443 | Flange/Yoke-Front Output | 1 | C20, M4; 1500 flange, 4 holes 0.50" at 80/100°, 4.75" bolt circle, 1.50"-10T spline. | Call for availability | |
| 144 | 3897K1441 | Flange/Yoke-Front Output | 1 | C34, H41, H52; 1410 yoke, 1.50"-10T spline, 2.13" seal O.D. | Call for availability | |
| 144 | 3897L1728 | Flange/Yoke-Front Output | 1 | E23; 1550 yoke, 1.50"-10T spline, 4 tapped holes 0.31"-24 UNF on 2.07" bolt circle. | Call for availability | |
| 144 | A13280R7896 | Flange/Yoke-Front Output | 1 | H47, H55; 1550/155N yoke, 1.50"-10T spline, includes item 145. | Call for availability | |
| 144 | 155NYS246 | Flange/Yoke-Front Output | 1 | H56; 1550/155N yoke, 1.50"-10T spline. | Call for availability | |
| 145 | 2297S695 | Deflector-Front Output Yoke | 1 | H47; "S" shape (cross section), 3.44" O.D., 2.18" I.D., 0.88" wide, included in item 144. | $23.61 | Add to Cart |
| 146 | S2691 | Capscrew-Front Brg. Cap | 4 | All; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 147 | 1229K1597 | Washer-Front Brg. Cap | 4 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 148 | A1805R408 | Oil Seal-Output Shaft Front | 1 | All; 2.88" O.D., 2.12" shaft, double lip, double or single case, with spring, 0.44" wide, included in item 149 and 155. | $98.54 | Add to Cart |
| 149 | A3866B730 | Cap Assy.-Output Shaft Front | 1 | All; 3866-D-1292 cast, 4 holes on 4.13" bolt circle, includes item 148, available as assembly only. | Call for availability | |
| 150 | 2297Z6656 | Gasket-Output Shaft Front Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 151 | 1828V74 | Bearing-Output Shaft Front | 1 | All; Ball bearing, 3.15" O.D., 1.57" I.D., 0.71" wide, with snap ring. | $88.32 | Add to Cart |
| 152 | 2847Q849 | Oil Catcher-Output Shaft | 1 | C20, C30, C31, C32, C34, H29, H33, H36, H39, H44, H46, H48; 1.97" both ends. | No longer available - Call for replacement | |
| 152 | 3221S19 | Oil Catcher-Output Shaft | 1 | C29, C41, C43, C44, H53, H54, H56; 3.62" high, 2.31" long, 1.68"/ 1.56" wide at opposite ends. | Call for availability | |
| 153 | WA36 | Washer-Oil Catcher | 1 | C20, C30, C31, C32, C34, H29, H33, H36, H39, H44, H46; 0.81" O.D., 0.46" I.D., 0.06" thick. | $120.45 | Add to Cart |
| 154 | K236 | Pin-Oil Catcher | 1 | C20, C30, C31, C32, C34, H29, H33, H36, H39, H44, H46; 0.09" diameter, 0.75" long. | $124.00 | Add to Cart |
| 155 | MPS3831 | Shaft-Front Output Assembly | 1 | A84, A88, A89, A90, A91, A92, A94, A99, C22, C30, C31, C32 C34, E22, E23, H31, H40, H41, H46, H47, H48, M4; 11.91" long, 1"-20 thread one end, spline at threaded end 1.49"-10, two bearing journals at opposite end, outer journal 1.25", inner journal 1.50". Includes items 140, 148, 155, 156, 157A, 157B, 158, 160, 168, 171, and 197B. | Call for availability | |
| 155 | MPS4217 | Shaft-Front Output Assembly | 1 | A98, A103, A104, A105, C18, C23, C29, C43, H52, H53, H54, H55, H56, H57; 11.91" long, 1"-20 thread one end, spline at threaded end 1.49"-10, two bearing journals at opposite end, outer journal 1.25", inner journal 1.50". Includes items 155, 156, 157A, 157B and 158. | Call for availability | |
| 156 | 1254M91 | Snap Ring-Front Output Shaft | 1 | A103, A104, A105, C20, C29, C31, C32, C34, C41, C43, C44, H29, H33, H36, H39, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; Included in item 155 (MPS-3831). | Call for availability | |
| 157 | 2848E161 | Clutch-Front Output Sliding | 1 | All; 23T, thick/thin external spline, 2.92" O.D., has external shift groove, 1.88"-10T spline. | Call for availability | |
| 158 | MPS4217 | Gear-Front Output Shaft | 1 | All; 27T, L.H. Helical, 5.23" O.D., includes 16T external spline and 23T internal spline, included in MPS-3831. | Call for availability | |
| 158A | 1228B1380 | Bearing-Needle, Outer | 1 | All; I.D. 1.25", O.D. 1.50", 1.00" length. | Call for availability | |
| 158B | 1228A183 | Bearing-Needle, Inner | 1 | All; I.D. 1.50", O.D. 1.88", 0.88" length. | $51.12 | Add to Cart |
| 159 | 1828S149 | Bearing-Front Output Shaft Rear | 1 | All; Ball bearing, 3.94" O.D., 2.17" I.D., 0.82" wide, with snap ring. | Call for availability | |
| 160 | A1805P536 | Oil Seal-Front Output Shaft Rear | 1 | A84, A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, E22, E23, H29, H31, H33, H36, H39, H41, H44, H46, H48, M4; 3.50" O.D., 2.63" shaft, 0.50" wide, double lip, double case with springs, replaces A-1805-R-356 with single lip only. Included in item 155. | $49.96 | Add to Cart |
| 161 | 1244Q1629 | Spacer-Front Output Shaft | 1 | A91, A103, H40, H47, H53, H55, H57; 2.62" O.D., 2.19" I.D., 2.25" wide. | No longer available - Call for replacement | |
| 162 | 2297Z6656 | Gasket-Front Output Rear Cap | 1 | All; Silicone gasket, use as required.* | $104.20 | Add to Cart |
| 163 | A3866C887 | Cap Assy.-Front Output Shaft Rear | 1 | A84, C29, C43, C44, E22, H46, H54; 3866-E-1253 cast, 6 drilled holes on 4.88" bolt circle, 1.16" thick, includes item 160. | Call for availability | |
| 163 | 3266Y857 | Cap Assy.-Front Output Shaft Rear | 1 | A91, A103, H40, H47, H55, H57; 6 holes, 3.31" long. | Call for availability | |
| 163 | A3866W777 | Cap Assy.-Front Output Shaft Rear | 1 | A99, C30, C31, C34, C41, H39; 3866-E-1253 cast, same as C-887 except 4 additional drilled holes on 4.31" bolt circle on either side of slot on O.D. are not equal distance, includes item 160, available as an assembly only. | Call for availability | |
| 163 | A3866R1162 | Cap Assy.-Front Output Shaft Rear | 1 | H29, H36, H52, H53; 3866-D-732 cast, 6 and 4 holes, 2.82" long, includes item 160. | Call for availability | |
| 163 | A3866D732 | Cap Assy.-Front Output Shaft Rear | 1 | All others; 3866-E-1253 cast, Same as W-777 except drilled holes on sides of slot on O.D. are equal distance, includes item 160. Available as an assembly only. | Call for availability | |
| 164 | 1229K1597 | Washer-Front Output Shaft Rear | 6 | All; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 165 | S26102 | Capscrew-Front Output Shaft Rear | 6 | H40, H42, H55, H57; 0.38"-16, 1.25" long, grade 8. | $178.00 | Add to Cart |
| 165 | S2691 | Capscrew-Front Output Shaft Rear | 6 | All others; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 166 | 4X840 | Stud-Rear Output Shaft | 6 | H29, H36, H53, H54; 0.38"-16 both ends, 1.81" long. | Call for availability | |
| 167 | N161 | Nut-Rear Output Shaft | 6 | H29, H36, H53, H54; 0.38"-24, grade 8. | No longer available - Call for replacement | |
| 168 | PW225 | Expansion Plug-Front Output Shaft | 1 | A84, A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, H29, H31, H33, H36, H39, H41, H44, H46, H52, H53, H54, H56, M4; 1.56" O.D., 0.08" thick, included in item 155. | $150.00 | Add to Cart |
| 169 | 3897F1332 | Hub-Brake | 1 | A84, A88, A89, A90, A92, A94, A99, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, H31, H33, H39, H40, H41, H44, H46, H48, H54, H56, M4; 5.50" O.D., 4.50" bolt circle, 2.78" long. | $1,032.64 | Add to Cart |
| 169 | 3897R3008 | Hub-Brake | 1 | H29, H36; 6.56" O.D., 5.75" bolt circle, 4.53" long. | Call for availability | |
| 170 | 1854W257 | Snap Ring-Brake Hub | 1 | All; Fits over 2.12" diameter shaft. Included in item 155. | $107.60 | Add to Cart |
| 171 | PW252 | Expansion Plug-Brake Hub | 1 | A84, A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C29, C30, C31, C32, C34, C41, C43, C44, E22, E23, H29, H31, H33, H36, H39, H41, H44, H46, H48, H52, H53, H54, H56, M4; 3.25" O.D., 0.134" thick, disc shape, included in item 155. | $118.00 | Add to Cart |
| 188 | 3875Q433 | Case-Transfer | 1 | A84, A88, A89, A90, A92, A94; 5875-P-432 casting, less interlock notches. W and Y mounting bosses. | Call for availability | |
| 188 | 3875K531 | Case-Transfer | 1 | A85; 5875-P-432 casting, same as Q-433 except tapped hole for P.T.O. with pump and oil level hole location. W and Y mounting bosses. | Call for availability | |
| 188 | 3290Q1005 | Case-Transfer | 1 | A91, A103; 5875-P-432 casting, same as Q-433 except oil fill plug 15° below output gear center. W and Y mounting bosses. | Call for availability | |
| 188 | 3290F1072 | Case-Transfer | 1 | A98, A105, C31; 5875-P-432 casting, same as Q-443 except for drain and oil level hole locations. | Call for availability | |
| 188 | 3875Z884 | Case-Transfer | 1 | A99, A104; 5875-K-453 casting, 4.13" bolt circle- 4 holes, 2 holes 3.63" bolt circle-4 holes each, 4.25" bolt circle-6 holes, hole size 0.38"-16. W and Z mounting bosses. | Call for availability | |
| 188 | 3875V438 | Case-Transfer | 1 | C22; 5875-P-432 casting, same as Q-433 except with interlock notches and reposition holes for clocking brake. W and Y mounting bosses. | Call for availability | |
| 188 | 3290R1084 | Case-Transfer | 1 | C34; 3875-Z-520 casting, W, Y, and Z mounting bosses, 3.63" bolt circle 4 holes, 4.88" bolt circle 6 holes, 4.50" bolt circle-4 holes, 5.00" bolt circle-6 holes, 0.38"-16 dia. holes. L.H. offset with interlock notches. W, Y, and Z mounting bosses. | Call for availability | |
| 188 | 3875A469 | Case-Transfer | 1 | E22, E23; 5875-Z-468 casting, same as Q-433 except for oil level and drain location. W and X mounting bosses. | Call for availability | |
| 188 | 3290G1073 | Case-Transfer | 1 | H31; 5875-Z-520 casting, same as Q-433 except for drain and oil level hole location. W, Y and Z mounting bosses. | Call for availability | |
| 188 | 3290E1071 | Case-Transfer | 1 | All others; 5875-K-453 casting, same as Z-884 except with interlock notches different bore size at input and tapped hole for oil. W and Z mounting bosses. | Call for availability | |
| 189 | 1199K1493 | Name Plate | 1 | All; 3.00" x 1.25", 2 holes 1.30" diameter. | Call for availability | |
| 190 | 9X16 | Screw-Name Plate | 2 | All; 1.25" length, 0.32" diameter. | $213.50 | Add to Cart |
| 191 | 1199K3287 | Expansion Plug-Shift Shaft | 1 | C20, C41, C44, H40, H47, H52, H53, H55, H57; 0.05" thick, cup shape. | Call for availability | |
| 191 | PW214 | Expansion Plug-Shift Shaft | 1 | All others; 0.08" thick, disc shape. | Call for availability | |
| 192 | P24 | Plug-Oil Drain | 1 | A97, A98, A105, C20, C29, C30, C31, C32, C34, C41, C43, C44, H29, H31, H33, H40, H41, H46, H47, H48, H52, H53, H54, H55, H56, H57; Non-magnetic, female square socket, 0.25"-18 thread. | $176.00 | Add to Cart |
| 192 | 1850T150 | Plug-Oil Drain | 1 | A89, A98, A99, A103, A104, A105, C29, C30, C31, C32, C34, C41, C43, C44, H46, H47, H48, H52, H53, H54, H55, H56, H57; Magnetic-male square head, 0.75"-15 thread. | $66.20 | Add to Cart |
| 192 | 1250G475 | Plug-Oil Drain | 1 | C29; Magnetic-0.62" square one end, 0.71" other end, 0.75"-14 P.T.F. | Call for availability | |
| 193 | 1199K3287 | Expansion Plug-Shift Shaft | 1 | C20, C29, C30, C31, C32, H40, H47; 0.05" thick, cup shape. | Call for availability | |
| 193 | PW214 | Expansion Plug-Shift Shaft | 1 | All others; 0.08" thick, 0.875" O.D., disc shape. | Call for availability | |
| 194 | P112 | Plug-Oil Drain | 1 | A84, A88, A90, A91, A92, A94, A98, A103, C20, C22, C29, C30, C32, C34, E22, E23, H29, H31, H33, H36, H40, H41, H44, H46, H47, H48, M4; Male, square head, 0.75"-14 thread. | $77.80 | Add to Cart |
| 195 | P112 | Plug-Oil Level | 1 | A84, A88, A89, A90, A91, A92, A94, C20, C22, C30, C32, C34, E22, E23, H32, H33, H39, M4; Male, square head, 0.75"-14 thread. | $77.80 | Add to Cart |
| 196 | 1898X856 | Oil Catcher-Input | 1 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; 0.38" diameter, 1.00" long. | Call for availability | |
| 197 | P112 | Plug-Oil High Level | 1 | H29, H31, H36, H39, H40, H41, H44; Male, square head, 0.75"-14 thread. | $77.80 | Add to Cart |
| 197 | P212 | Plug-Oil High Level | 1 | H33; Female, square socket, 0.75"-14 thread. | $77.50 | Add to Cart |
| 197 | 1199J894 | Plug-Oil High Level | 1 | -; 0.75" standard pipe thread, cap plug, not available at this time. | Call for availability | |
| 197A | 1898A261 | Pipe-Nipple Oil Level | 1 | -; 6 pint capacity, 3.75" long, 0.75"-14 N.P.T.F., not available at this time. | Call for availability | |
| 197A | 2296W1063 | Pipe-Nipple Oil Level | 1 | -; 5 pint capacity, 2.50" long, 0.75"-14 N.P.T.F., not available at this time. | Call for availability | |
| 197B | 1898C835 | Elbow-High Oil Level | 1 | -; 0.75"-14 N.P.T.F., 90 degrees, not available at this time. | Call for availability | |
| 197B | 1898S201 | Elbow-High Oil Level | 1 | -; Use for 3 and 4 pint capacity, 0.75"-14 N.P.T.F., not available at this time. | Call for availability | |
| 197B | 1898X258 | Elbow-High Oil Level | 1 | H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57; 45 degree elbow, 1.50" one end, 0.69" other end, 0.75" standard pipe thread. Included in item 155. | Call for availability | |
| 198 | 1898D836 | Nipple | 1 | -; 0.75" standard pipe thread, 0.50" long, 0.82" I.D., 1.05" O.D. | Call for availability | |
| 199 | P112 | Plug-Oil Level | A84, A88, A89, A104, A105, H29, H36, H40, H41, H44 C41, C43, C44, H52, H53, H54, H55, H56, H57; Male, square head, 0.75"-14 thread. | $77.80 | Add to Cart | |
| 200 | A1205N1132 | Oil Seal-Shift Shaft | 1 | All; 1.26" O.D., 0.75" shaft, single lip and dirt lip with spring, 0.25" wide, replaces A-1805-S-305 with single lip only. | $41.40 | Add to Cart |
| 201 | A1205N1132 | Oil Seal-Shift Shaft | 1 | All; 1.26" O.D., 0.75" shaft, single lip and dirt lip with spring, 0.25" wide, replaces A-1805-S-305 with single lip only. | $41.40 | Add to Cart |
| 202 | 2849G241 | Shift Fork-Declutch | 1 | M4; 2849-Z-338 forging., small fork tang, 0.19" wide, 2.25" fork opening. | Call for availability | |
| 202 | 2849L220 | Shift Fork-Declutch | 1 | All others; 2849-T-332 forging, small fork tang, 0.13" wide, 2.25" fork opening. | No longer available - Call for replacement | |
| 203 | LW166 | Lockwire-Shift Fork | 1 | All; 16 gage, 6.00" long. | $28.78 | Add to Cart |
| 204 | 26X54 | Lockscrew-Shift Fork | 1 | All; 0.38"-24 thread, 1.15" long, 0.09" diameter double drill square head. | $25.43 | Add to Cart |
| 205 | 2843T410 | Shift Shaft-Declutch | 1 | C20, C22, C30, C31, C32, C34, C41, C44, H40, H47, H48, H52, H55, H56, H57; 7.25" long, 2 equal ball detents 0.16" deep from ball detent end, setscrew hole bottom right quadrant. | Call for availability | |
| 205 | 2244M39 | Shift Shaft-Declutch | 1 | C29, C43, H53; 7.25" long, tap drill 1.00" deep- 0.44"-20 UNF, 0.68" deep, 0.75" O.D. | Call for availability | |
| 205 | 2843W439 | Shift Shaft-Declutch | 1 | E22, E23,; Same as T-410 except unequal ball detent, depth 0.13" and 0.21". No longer available. | Call for availability | |
| 205 | 2843Q459 | Shift Shaft-Declutch | 1 | M4; Same as T-410 except 7.13" long and ball detent end setscrew hole bottom, left quadrant. | Call for availability | |
| 205 | 2843C393 | Shift Shaft-Declutch | 1 | All others; Same as T-410 except 2 equal ball detents 0.19" deep. | No longer available - Call for replacement | |
| 206 | 2843B392 | Shift Shaft- Hi-Low | 1 | A84, A88, A89, A90, A91, A92, A94, A98, A99, A103, A104, A105; 7.28" long, 2 equal ball detents, 0.19" deep from ball detent end, setscrew hole upper right quadrant. | No longer available - Call for replacement | |
| 206 | 2297P2226 | Shift Shaft- Hi-Low | 1 | C20, C29, C30, C31, C32, C34, C41, C43, C44, H40, H47, H52, H53, H55, H57; Same as B-392 except 7.41" long and 2 equal ball detents 0.23" deep. | No longer available - Call for replacement | |
| 206 | 2843S409 | Shift Shaft- Hi-Low | 1 | C22; Same as B-392 except extra slot added at ball detent area. No longer available. | Call for availability | |
| 206 | 2843X440 | Shift Shaft- Hi-Low | 1 | E22, E23; Same as B-392 except 2 unequal ball detents 0.16" and 0.19" deep. | Call for availability | |
| 206 | 2843K453 | Shift Shaft- Hi-Low | 1 | H29, H31, H33, H36, H39, H41, H44, H46, H54; Same as B-392 except 7.31" long. | Call for availability | |
| 206 | 2843U463 | Shift Shaft- Hi-Low | 1 | H48, H56; Same as K-453 except extra slot added at ball detent area. | Call for availability | |
| 206 | 2843P458 | Shift Shaft- Hi-Low | 1 | M4; 7.63" long, 2 equal ball detents 0.19" deep from ball detent end, setscrew hole upper left quadrant. | Call for availability | |
| 207 | 2849U281 | Shift Fork- Hi-Low | 1 | M4; 2849-Z-338 forg., 2.38" fork opening, inner fork width 0.19". | Call for availability | |
| 207 | 2849V282 | Shift Fork- Hi-Low | 1 | All others; Same as U-281 except 0.75" diameter hole, inner fork width 0.06". | No longer available - Call for replacement | |
| 208 | LW166 | Lockwire-Shift Fork | 1 | All; 16 gage, 6.00" long. | $28.78 | Add to Cart |
| 209 | 26X54 | Lockscrew-Shift Fork | 1 | All; 0.38"-24 thread, 1.15" long, 0.09" diameter double drill square head. | $25.43 | Add to Cart |
| 210 | 1229K1597 | Washer-Case And Top Cover | C43, H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57 M4 All others; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart | |
| 211 | S2682 | Capscrew-Case And Top Cover | C43, H29, H31, H33, H36, H39, H40, H41, H44, H46, H47, H48, H52, H53, H54, H55, H56, H57 M4 All others; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart | |
| 212 | A1199C1043 | Breather-Oil | 1 | A84, A88, A89, A90, A91, A92, A94, A103, A104, A105, C20, C22, C41, C43, C44, E22, E23, H29, H52, H53, H54, H55, H56, H57, M4; 0.13"-27 N.P.T.F., 1.03" long. | $127.20 | Add to Cart |
| 212 | P42 | Plug | 1 | A99, H43, H46; Hex socket-female, 0.125"-27 thread. | $135.00 | Add to Cart |
| 213 | S26102 | Capscrew-Case Top Cover | 1 | -; 0.38"-16, 1.25" long, grade 8. | $178.00 | Add to Cart |
| 214 | 1846X284 | Dowel-T-Case And Cover | 2 | All; 0.38" diameter, 0.88" long. | Call for availability | |
| 215 | 1846B262 | Pin-Brake Bell Crank | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C31, C32, C34, C41, E23, H43, H48; 1.75" long, 0.75" diameter, 0.16" diameter hole. | Call for availability | |
| 216 | 1898E57 | Ball-Shift Shaft Lock | 1 | All; 0.44" diameter ball. | Call for availability | |
| 217 | 2858A1 | Spring-Shift Shaft Lock | 1 | A99, A104, C30, C31, C32, C44, E22, E23; 13 coils, 1.88" free length. | $1,042.00 | Add to Cart |
| 217 | 2858C237 | Spring-Shift Shaft Lock | 1 | C34, H29, H31, H33, H36, H39, H41, H44, H46, H48, H54, H56, M4; 10.75 coils, 1.48" free length. | No longer available - Call for replacement | |
| 217 | 2858B236 | Spring-Shift Shaft Lock | 1 | All others; 9.25 coils, 1.28" free length. | Call for availability | |
| 218 | 1898E57 | Ball-Shift Lock | 1 | All; 0.44" diameter ball. | Call for availability | |
| 219 | 2858A1 | Spring-Shift Shaft Lock | 1 | A99, A104, C41, E22, E23; 13 coils, 1.88" free length. | $1,042.00 | Add to Cart |
| 219 | 2858C237 | Spring-Shift Shaft Lock | 1 | C34, H29, H31, H33, H36, H39, H41, H44, H46, H48, H54, H56, M4; 10.75 coils, 1.48" free length. | No longer available - Call for replacement | |
| 219 | 2858B236 | Spring-Shift Shaft Lock | 1 | All others; 9.25 coils, 1.28" free length. | Call for availability | |
| 220 | 1845A27 | Pull Rod-Brake | 1 | -; Not used on 223 models in this book. | Call for availability | |
| 221 | WA36 | Washer-Brake Pull Rod | 1 | -; Not used on 223 models in this book. | $120.45 | Add to Cart |
| 222 | WA36 | Washer-Brake Pull Rod | 1 | -; Not used on 223 models in this book. | $120.45 | Add to Cart |
| 223 | 302T540 | Bellcrank-Brake Operating | 1 | -; Not used on 223 models in this book. | Call for availability | |
| 224 | K248 | Cotter-Bellcrank Pin | 1 | -; Not used on 223 models in this book. | $387.00 | Add to Cart |
| 225 | WA310 | Washer-Bellcrank Pin | 1 | -; Not used on 223 models in this book. | $185.00 | Add to Cart |
| 226 | K236 | Cotter-Brake Pull Rod | 1 | -; Not used on 223 models in this book. | $124.00 | Add to Cart |
| 227 | K236 | Cotter-Brake Pull Rod | 1 | -; Not used on 223 models in this book. | $124.00 | Add to Cart |
| 228 | 2297Z6656 | Gasket-Cover | 1 | -; Silicone gasket-use as required.* | $104.20 | Add to Cart |
| 229 | 3855B210 | Cover Assy.- T-Case Top | 1 | A84, A91, A103, E22; 3855-E-447 rough part, 8 mounting holes 0.41" and 2 dowel holes 0.40". | Call for availability | |
| 229 | A3855G189 | Cover Assy.- T-Case Top | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C41, E23; 3855-C-445 rough part, same as N-196 except with 0.75" hole. Includes item 215. | Call for availability | |
| 229 | A3855N196 | Cover Assy.- T-Case Top | 1 | C22, C29, C30, C31, C32, C34, C43, C44, H48, H53, H56; 3855-C-445 rough part, with interlock, 8 mounting holes 0.40" and 2 dowel holes 0.38". Includes item 215, available as assembly only. | Call for availability | |
| 229 | 3855J270 | Cover Assy.- T-Case Top | 1 | H29, H31, H33, H36, H39, H41, H44, H46; 3855-E-447 rough part, 12 thru-holes, 2 dowel holes 0.39" diameter and 2 holes 0.36" diameter. | Call for availability | |
| 229 | 3855S279 | Cover Assy.- T-Case Top | 1 | H40, H47, H52, H54, H55, H57; 3855-C-445 rough part, same as J-270 except add 0.93" thru hole thru 2 lower bosses for interlock. | Call for availability | |
| 229 | 3855L272 | Cover Assy.- T-Case Top | 1 | M4; 3855-B-444 rough part, 10 thru holes, 2 dowel holes, 1 breather hole. | Call for availability | |
| 230 | 1846D264 | Shaft-Shift Interlock Pin | 1 | C20, C22, C29, C30, C31, C32, C34, C41, C44, H40, H47, H48, H52, H53, H55, H56, H57; 0.38" diameter, 6.62" long. | $169.26 | Add to Cart |
T-223 Series DLM Brakes
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 172 | 2297Z6656 | Gasket-Brake Oil Deflector | A88, A89, A90, A92, C20, C22, E23, H41, H44; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 173 | 2847S617 | Oil Deflector-Brake | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C32, C34, C41, E23, H41, H44; 4 holes on 4.31" bolt circle, 2 notches, 4 flats. | Call for availability | |
| 174 | 1829Z754 | Washer-Brake Oil Deflector | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C32, C34, C41, E23, H41, H44; 5.00" O.D., 3.56" I.D., 0.09" thick with 2 holes on 4.31" bolt circle. | Call for availability | |
| 175 | A13736U229 | Backing Plate Assy. | 1 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41,H44; 10.20" O.D., 3.50" I.D., 0.47" diameter- 4 holes on 4.13" bolt circle. | Call for availability | |
| 176 | 1229E1513 | Washer-Brake Mounting Capscrew | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C32, C34, C41, E23, H41, H44; 0.81" O.D., 0.47" I.D., 0.09" thick. | $174.00 | Add to Cart |
| 177 | S278A2 | Capscrew-Brake Mounting | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C32, C34, C41, E23, H41, H44; 0.44"-14, 1.00" long, loctite patch, grade 8. | $4.58 | Add to Cart |
| 178 | 2247K1259 | Lever-Brake | 1 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44; Center hole diameter of 4.00", length from center of linkage hole to center of roller hole approx. 10.42". | No longer available - Call for replacement | |
| 179 | 2297L6720 | Roller-Brake | 1 | A88, A89, A90, A92, A94, A98, A99, A104, A105, C20, C22, C32, C34, C41, E23, H41, H44; 1.00" O.D., 0.56" I.D., 0.25" thick. | No longer available - Call for replacement | |
| 180 | 2258Q719 | Spring-Brake Shoe Return | 4 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44; Tension spring, 0.50" O.D., 17 coils, 2.09" free length. | $7.03 | Add to Cart |
| 180 | 2258T1268 | Spring-Brake Shoe Return | 1 | A94, C34; 1.88" free length, 0.43" O.D. 0.88" solid height. | $38.30 | Add to Cart |
| 181 | A63722L194 | Brake Shoe And Lining Assy. | 2 | A88, A89, A90, A92, A104, A105, C22, C41, E23, H41, H44; Includes item 182 and 183. Replaces A4-3722-L-194. | $259.70 | Add to Cart |
| 182 | RV354 | Rivet-Lining To Shoe | 20 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44; Included in item 181 and 183. | Call for availability | |
| 183 | 2000S1397 | Lining Kit-Brake Shoe | 1 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44; Brake linings and rivets. Included in item 181. | $227.57 | Add to Cart |
| 184 | 3719Y51 | Drum-Brake | 1 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44; 3.63" pilot diameter, 0.45" punch-4 holes on 4.50" bolt circle. | Call for availability | |
| 185 | 1229E1513 | Washer-Brake Drum Capscrew | 4 | A88, A89, A90, A92, A94, A99, A104, A105, C20, C22, C32, C34, C41, E23, H41, H44, H56; 0.81" O.D., 0.47" I.D., 0.09" thick. | $174.00 | Add to Cart |
| 186 | LW1616 | Lockwire-Brake Drum Capscrew | 1 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44; 16 gage, 16.00" long. | Call for availability | |
| 187 | S276D2 | Capscrew-Brake Drum | 4 | A88, A89, A90, A92, A104, A105, C20, C22, C41, E23, H41, H44, H56; 0.44"-14, 0.75" long, 1 hole drilled in head, grade 8. | Call for availability |
T-223 Series DCM Brakes
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 231 | 1779Z260 | Nut-Lock | 1 | H29, H36, H52; 0.56"-12, 1.01" across flats. | Call for availability | |
| 232 | WA39 | Washer-Brake | 1 | H29, H36, H52; 1.188" O.D., 0.59" I.D., 0.09" thick. | $675.00 | Add to Cart |
| 233 | 372X206 | Lever-Brake | 1 | H29, H52; 5.25" from center line outer hole to 1.00" bore. | Call for availability | |
| 233 | 372B210 | Lever-Brake | 1 | H36; 6.50" from center line outer hole to 1.00" bore. | $251.73 | Add to Cart |
| 234 | A3736D472 | Backing Plate Assy. | 1 | H29, H36, H52; 0.50" diameter-4 holes on 5.20" bolt circle. | $174.12 | Add to Cart |
| 235 | S289A2 | Capscrew-Brake Mounting | 4 | H29, H36, H52; 0.50"-13, 1.13" long with loctite patch. | Call for availability | |
| 236 | 2710U151 | Camshaft | 1 | H29, H36, H52; 2710-X-1154 forging, 32 serrations equally spaced. | $115.07 | Add to Cart |
| 237 | A3787Q17 | Strut Assy. | 1 | H29, H36, H52; 9.40" long, 0.56" thick. | $98.24 | Add to Cart |
| 238 | 2758A53 | Spring-Brake Shoe Return | 4 | H29, H36, H52; 11 coils, 0.75" diameter, 2.75" long. | $121.00 | Add to Cart |
| 239 | A23722G501 | Brake Shoe And Lining Assy. | 1 | H29, H36, H52; Includes lining and rivets. | $153.75 | Add to Cart |
| 240 | RV875 | Rivet-Lining To Shoe | 24 | H29, H36, H52 | $113.00 | Add to Cart |
| 241 | 2000J1362 | Lining Kit-Brake Shoe | 1 | H29, H36, H52; Includes brake shoe lining and rivets. | $165.30 | Add to Cart |
| 242 | A23722G501 | Brake Shoe And Lining Assy. | 1 | H29, H36, H52; Includes lining and rivets. | $153.75 | Add to Cart |
| 243 | 3897R3008 | Hub-Brake | 1 | H29, H36, H52, H53; 6.56" O.D., 4.34" long, 0.36"-24 UNF, 4 holes on 5.75" bolt circle diameter. | Call for availability | |
| 244 | A3819E525 | Drum-Brake | 1 | H29, H36, H52; Mounted on item 243 using item 186. | Call for availability | |
| 245 | S166D2 | Capscrew-Brake Drum | 4 | H29, H36, H52; 0.38"-24, 0.75" long, 1 long drilled in head, grade 8. | Call for availability | |
| 246 | LW1616 | Lockwire-Brake Drum Capscrew | 1 | H29, H36, H52; 16 gage, 16.00" long. | Call for availability |
T-221 Series Main Case
| Item | Part No. | Description | Qty | Notes | Price | |
|---|---|---|---|---|---|---|
| 67 | S2682 | Capscrew-Input Shaft Rear Bearing Cage | 4 | All; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart |
| 68 | 1229K1597 | Washer-Input Shaft Rear Brg. | 4 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 68 | WA16 | Cage | 4 | All others; 0.67" O.D., 0.32" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 69 | 3866R746 | Cage-Input Shaft Rear Brg. | 1 | All; 4 holes on 4.25" bolt circle, closed end, 1.31" long. | Call for availability | |
| 70 | 2297Z6656 | Gasket-Input Shaft Rear Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 71 | 1828P94 | Bearing-Input Shaft Rear | 1 | All; Ball bearing, with shield, 2.44" O.D., 1.18" I.D., 0.63" wide. | Call for availability | |
| 71A | 332 | Cup-Input Shaft Rear | 1 | -; Not used on 221 models in this book. | $43.08 | Add to Cart |
| 71B | 339 | Cone-Input Shaft Rear | 1 | -; Not used on 221 models in this book. | $61.48 | Add to Cart |
| 72 | 1829X726 | Washer-Input Shaft Rear Brg. | 1 | All; 2.00" O.D., 1.20" I.D., 0.12" thick. | Call for availability | |
| 73 | 1825W205 | Bushing-Direct Drive Gear | 1 | All; 1.50" O.D., 1.36" I.D., 1.28" wide, split, 4 holes and 8 grooves, included in item 74. Not sold separately. Sold with direct drive gear only. | Call for availability | |
| 74 | A3892U1711 | Gear Assy.-Direct Drive (1.796-1) | 1 | All; 33T, spur, 4.98" O.D., 20T spline, 1.49" bushing bore, includes item 73. No longer available. | Call for availability | |
| 74 | A3892X1714 | Gear Assy.-Direct Drive (1.94-1) | 1 | 33T, spur, 4.98" O.D., 19T spline, 1.49" bushing bore, includes item 73. | Call for availability | |
| 75 | 1829Y727 | Washer-Direct Drive Gear | 1 | All; 2.00" O.D., 1.41" I.D., 0.12" thick. | Call for availability | |
| 76 | 3892V1712 | Gear-Low Speed Sliding (1.796-1) | 1 | All; 20T, spur, 3.68" O.D., 1.63"-10 spline, with shift groove, no longer available. | Call for availability | |
| 76 | 3892Y1715 | Gear-Low Speed Sliding (1.94-1) | 1 | 19T, spur, 3.51" O.D., 1.63"-10 spline. | Call for availability | |
| 77 | 3880P744 | Shaft-Input | 1 | A1, M, M6, M7; 9.09" long with threaded end. | Call for availability | |
| 77 | 3880J1128 | Shaft-Input | 1 | All others; 8.14" long, no threads. | Call for availability | |
| 78 | 1844C809 | Spacer-Input Shaft | 1 | -; Not used on 221 models in this book. | No longer available - Call for replacement | |
| 79 | 1828L142 | Bearing-Input Shaft Front | 1 | All; Ball bearing with shield, 2.83" O.D., 1.38" I.D., 0.67" long. | Call for availability | |
| 79A | 357 | Cone-Input Shaft Front | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 79B | 353 | Cup-Input Shaft Front | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 79C | 1229F3048 | Washer-Input Shaft Front | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 80 | 2803S1865 | Shim-Input Shaft Front Brg. Cap | 1 | A1, M, M6,; .003", use as required, 3 holes. | $129.60 | Add to Cart |
| 80 | 2803T1866 | Shim-Input Shaft Front Brg. Cap | 1 | M7; .005", use as required, 3 holes. | $466.00 | Add to Cart |
| 80 | 2803U1867 | Shim-Input Shaft Front Brg. Cap | 3 | .010", use as required, 3 holes | $659.00 | Add to Cart |
| 80 | 2803D2162 | Shim-Input Shaft Front Brg. Cap | 2 | All others; .003", use as required, 9 holes. | Call for availability | |
| 80 | 2803E2163 | Shim-Input Shaft Front Brg. Cap | 3 | .005", use as required, 9 holes. | Call for availability | |
| 80 | 2803F2164 | Shim-Input Shaft Front Brg. Cap | 2 | .010", use as required, 9 holes. | Call for availability | |
| 81 | A33866U749 | Cap Assy.-Input Shaft Front Brg. | 1 | A1, M, M6, M7; 3866-J-1258 cast, 3 holes on 3.75" bolt circle, open end, includes item 86. Replaces A-3866-U-749 with oil seal A-1805-N-378 which replaced A1-3866-U-749 with oil seal A-1805-W-413. | Call for availability | |
| 81 | A3866U1113 | Cap Assy.-Input Shaft Front Brg. | 1 | All others; Shipping cover only. | Call for availability | |
| 82 | P42 | Plug-Input Shaft Front Brg. Cap | 1 | -; Hex socket-female, 0.125"-27 thread. | $135.00 | Add to Cart |
| 83 | 1229K1597 | Washer-Input Shaft Front | 3 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 83 | WA16 | Brg. Cap | 3 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 84 | S26122 | Capscrew-Input Shaft Front Brg. | 3 | A1, M, M6, M7; 0.38"-16, 1.50" long, grade 8. Replaces S-2611-1 which is 1.38" long. | $1.74 | Add to Cart |
| 84 | S2682 | Capscrew-Input Shaft Front Brg. | 3 | All others; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart |
| 85 | PW226 | Plug-Input Shaft Shipping Cover | 1 | N4, N7; 1.63" diameter, 0.08" thick. Part no longer available. | Call for availability | |
| 86 | A1805E447 | Oil Seal-Input Shaft Front Brg. Cap | 1 | A1; 2.50" O.D., 1.75" I.D., 0.77" wide, double seal lip, and case, included in item 81. | $35.41 | Add to Cart |
| 87 | 1829V100 | Washer-Input Shaft | 1 | -; Not used on 221 models in this book. | $4,470.00 | Add to Cart |
| 88 | 1827H242 | Nut-Input Shaft | 1 | A1, M, M6, M7; 0.88"-14, 5.00" height, slotted. | Call for availability | |
| 89 | K2412 | Cotter-Input Shaft Nut | 1 | A1, M, M6, M7; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 90 | 2847P640 | Deflector-Input Yoke | 1 | M, M6, M7; Hook shape (cross section), 2.75" O.D., 1.76" I.D., 0.50" wide, included in item 91. | Call for availability | |
| 91 | A13897A1431 | Flange/Yoke-Input | 1 | M, M6, M7; 1310 series, 3.69" long, includes item 90, 1.25"-10T spline. | Call for availability | |
| 92 | A13897A1431 | Flange/Yoke-Rear Output | 1 | M, M6; 1310 series, 3.69" long, includes item 93, 1.25"-10 spline. | Call for availability | |
| 92 | A13897Q1655 | Flange/Yoke-Rear Output | 1 | M7, N4, N7; 1310 series, 3.53" long, 1.25"-10T spline, includes item 93. | Call for availability | |
| 93 | 2847P640 | Deflector-Rear Output Yoke | 1 | M, M6, M7, N4, N7; Included in item 92. | Call for availability | |
| 94 | 1827H242 | Nut-Rear Output Shaft | 1 | All; 1.81" O.D., 1.03" I.D., 0.25" thick. | Call for availability | |
| 95 | 1229E1331 | Washer-Rear Output Shaft Nut | 1 | -; Not used on 221 models in this book. | No longer available - Call for replacement | |
| 96 | A1805E447 | Oil Seal-Rear Output Shaft | 1 | All; 2.50" O.D., 1.75" I.D., 0.77" wide, double seal lip and case, included in item 97. | $35.41 | Add to Cart |
| 97 | A3866Y805 | Cap Assy.-Rear Output Shaft | 1 | All; 4 holes on 3.88" bolt circle, includes item 96 and 98. | Call for availability | |
| 98 | 1199M1105 | Bushing-Speedometer Driven Gear | 1 | All; Flanged, 0.44" flange O.D., 0.03" flange width, 0.31" O.D., 0.25" I.D. 0.34" wide, | No longer available - Call for replacement | |
| 99 | 1898N846 | Gear-Speedometer Driven | 1 | A1; 15T, R.H., helical, 0.74" O.D. | Call for availability | |
| 100 | 1898U671 | Sleeve-Speedometer Driven Gear | 1 | A1; 0.38" thru-hole, 1.26" long, 0.81"-20 UNEF 2A threads one end, 0.88"-18 NS 2A threads other end. | Call for availability | |
| 101 | A1850R18 | Plug-Speedometer Hole | 1 | -; Not used on 221 models in this book. | $19.43 | Add to Cart |
| 102 | K2412 | Cotter-Rear Output Shaft Nut | 1 | A1, M, M6, M7; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 102 | K2410 | Cotter-Rear Output Shaft Nut | 1 | All others; 0.13" diameter, 1.25" long. | $239.00 | Add to Cart |
| 103 | S2682 | Capscrew-Rear Output Cap | 2 | A1, M, M6,; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart |
| 103 | S26142 | Capscrew-Rear Output Cap | 1 | M7; 0.38"-16, 1.75" long, grade 8. | Call for availability | |
| 103 | 10X665 | Capscrew-Rear Output Cap | 1 | 0.38"-16, 1.00" long, flat head. | $2.65 | Add to Cart |
| 103 | S2691 | Capscrew-Rear Output Cap | 2 | N4, N7; 0.38"-16, 1.12"long, grade 8. | Call for availability | |
| 103 | S26142 | Capscrew-Rear Output Cap | 1 | 0.38"-16, 1.75" long, grade 8. | Call for availability | |
| 103 | 10X665 | Capscrew-Rear Output Cap | 1 | 0.38"-16, 1.00" long, flat head. | $2.65 | Add to Cart |
| 104 | 1229K1597 | Washer-Rear Output Cap | 3 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 104 | 1229E525 | Washer-Rear Output Cap | 1 | 0.78" O.D., 0.39" I.D., external teeth. | Call for availability | |
| 104 | WA16 | Washer-Rear Output Cap | 3 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 104 | 1229E525 | Washer-Rear Output Cap | 1 | 0.78" O.D., 0.39" I.D., external teeth. | Call for availability | |
| 105 | A1199C1043 | Breather-Rear Output Shaft Cap | 1 | -; Not used on 221 models in this book. | $127.20 | Add to Cart |
| 106 | 2297Z6656 | Gasket-Rear Output Cap | 1 | All; Silicone gasket, use as required.* | $104.20 | Add to Cart |
| 107 | 1898Q849 | Gear-Speed Driven | 1 | A1; 4T, R.H., Helical, 1.78" O.D. | Call for availability | |
| 108 | 1898P848 | Spacer-Rear Output Shaft | All others N, M6, M7; 4T, R.H., Helical, 1.88" O.D. 2.13" O.D., 1.81" I.D., 1.38" wide. No longer available. | Call for availability | ||
| 109 | 15245 | Cup-Rear Output Shaft Rear Brg. | 1 | All; 2.44" O.D. | $9.64 | Add to Cart |
| 110 | 15126 | Cone-Rear Output Shaft Rear Brg. | 1 | All; 1.25" bore. | $37.06 | Add to Cart |
| 111 | 3892R1708 | Gear-Rear Output Shaft | 1 | All; 33T, L.H., Helical, 4.97" O.D., 1.63"-10T spline. | Call for availability | |
| 112 | 3880Q745 | Shaft-Rear Output | 1 | All; 9.06" long, threaded one end, 1.25"-10 spline, 1.63"-10T spline. | Call for availability | |
| 113 | 15126 | Cone-Rear Output Shaft Fwd. Brg. | 1 | All; 1.25" bore. | $37.06 | Add to Cart |
| 114 | 15245 | Cup-Rear Output Shaft Fwd. Brg. | 1 | All; 2.44" O.D. | $9.64 | Add to Cart |
| 115 | 2803V1868 | Shim-Rear Output Forward Brg. | 1 | A1, M; .003", use as required, 3 holes. | $326.50 | Add to Cart |
| 115 | 2803W1869 | Cap | 1 | .005", use as required, 3 holes. | Call for availability | |
| 115 | 2803X1870 | Cap | 3 | .010", use as required, 3 holes. | Call for availability | |
| 115 | 2803V1868 | Cap | 2 | M6, M7; .003", use as required, 3 holes. | Call for availability | |
| 115 | 2803W1869 | Cap | 3 | .005", use as required, 3 holes. | Call for availability | |
| 115 | 2803X1870 | Cap | 2 | .010", use as required, 3 holes. | Call for availability | |
| 115 | 2803G2165 | Cap | 2 | All others; .003", use as required, 4 holes. | Call for availability | |
| 115 | 2803H2166 | Cap | 3 | .005", use as required, 4 holes. | Call for availability | |
| 115 | 2803J2168 | Cap | 2 | .010", use as required, 4 holes. | Call for availability | |
| 116 | 3866T748 | Cap-Rear Output Forward Cap | 1 | All; Stamping, 3 holes on 3.25" bolt circle, closed end. | Call for availability | |
| 117 | 1229K1597 | Washer-Rear Output Forward | 3 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 117 | WA16 | Cap | 3 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 118 | S2672 | Capscrew-Rear Output Fwd. Cap | 3 | All; 0.38"-16", 0.88" long, grade 8. | $89.00 | Add to Cart |
| 119 | S2672 | Capscrew-Idler Shaft Rear Cap | 3 | All; 0.38"-16", 0.88" long, grade 8. | $89.00 | Add to Cart |
| 120 | 1229K1597 | Washer-Idler Shaft Rear Cap | 3 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 120 | WA16 | Washer-Idler Shaft Rear Cap | 3 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 121 | 3866T748 | Cap-Idler Shaft Rear | 1 | All; Stamping, 3 holes on 3.25" bolt circle, closed end. | Call for availability | |
| 122 | 2297Z6656 | Gasket-Idler Shaft Rear Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 123 | 1854E187 | Snap Ring-Idler Shaft | 1 | -; Not used on 221 models in this book. | $406.20 | Add to Cart |
| 124 | 15245 | Cup-Idler Shaft Rear Brg. | 1 | All; 2.44" bore. | $9.64 | Add to Cart |
| 125 | 15126 | Cone-Idler Shaft Rear Brg. | 1 | All; 1.25" bore. | $37.06 | Add to Cart |
| 126 | 3892W1713 | Gear-Idler Shaft | 1 | All; 34T, R.H., Helical, 5.12" O.D., 1.63"-10T spline. | Call for availability | |
| 127 | 1844D498 | Spacer-Idler Shaft Gear | 1 | All; 2.13" O.D., 1.69" I.D., 1.16" wide. | Call for availability | |
| 128 | 3892W1713 | Gear-Low Speed (1.796-1) | 1 | All; 37T, spur, 6.44" O.D., 1.63"-10T spline. | Call for availability | |
| 128 | 3892Z1716 | Gear-Low Speed (1.94-1) | 1 | 38T, spur, 6.61" O.D., 1.63"-10T spline. | Call for availability | |
| 129 | 3880N742 | Shaft-Idler | 1 | All; 5.38" long, 1.25" bearing diameter both ends, 1.63"-10T spline. | Call for availability | |
| 130 | 02476 | Cone Idler Shaft Front Brg. | 1 | All; 1.25" bore. | Call for availability | |
| 131 | 02420 | Cup-Idler Shaft Front Brg. | 1 | All; 2.69" O.D. | Call for availability | |
| 132 | 1829H788 | Washer-Idler Shaft Brg. | 1 | -; Not used on 221 models in this book. | No longer available - Call for replacement | |
| 133 | 10X1292 | Capscrew-Idler Shaft Brg. Washer | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 134 | LW163 | Lockwire-Idler Shaft Brg. Washer | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 135 | 2803V1868 | Shim-Idler Shaft Front Brg. Cap | 1 | A1, M; .003", use as required, 3 holes. | $326.50 | Add to Cart |
| 135 | 2803W1869 | Shim-Idler Shaft Front Brg. Cap | 1 | .005", use as required, 3 holes. | $324.50 | Add to Cart |
| 135 | 2803X1870 | Shim-Idler Shaft Front Brg. Cap | 3 | .010", use as required, 3 holes. | $414.00 | Add to Cart |
| 135 | 2803V1868 | Shim-Idler Shaft Front Brg. Cap | 2 | All others; .003", use as required, 3 holes. | $326.50 | Add to Cart |
| 135 | 2803W1869 | Shim-Idler Shaft Front Brg. Cap | 3 | .005", use as required, 3 holes. | $324.50 | Add to Cart |
| 135 | 2803X1870 | Shim-Idler Shaft Front Brg. Cap | 2 | .010", use as required, 3 holes. | $414.00 | Add to Cart |
| 136 | 3866T748 | Cap-Idler Shaft Front Brg. | 1 | All; Stamping, 3 holes on 3.25" bolt circle, closed end. | Call for availability | |
| 137 | 1229K1597 | Washer-Idler Shaft Front Brg. | 3 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 137 | WA16 | Washer-Idler Shaft Front Brg. | 3 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 138 | S2672 | Capscrew-Idler Shaft Front Brg. | 3 | All; 0.38"-16, 0.88" long, grade 8. | $89.00 | Add to Cart |
| 139 | K2412 | Cotter-Output Shaft Nut | 1 | All; 0.13" diameter, 1.50" long. | $131.00 | Add to Cart |
| 140 | 1827H242 | Nut-Output Shaft | 1 | A1, M, M6, M7; 0.88"-14, 0.50" high, slotted. | Call for availability | |
| 140 | N5121 | Nut-Output Shaft | 1 | All others; 0.75"-16, slotted, grade 8. | Call for availability | |
| 141 | 1229V1556 | Washer-Output Shaft | 1 | N4, N7; 1.38" O.D., 0.78" I.D., 0.12" thick. | $36.30 | Add to Cart |
| 142 | 10X830 | Capscrew-Oil Catcher | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 143 | 1229K1597 | Washer-Front Brg. Cap | 1 | -; Not used on 221 models in this book. | $135.00 | Add to Cart |
| 144 | A13897A1431 | Flange/Yoke-Front Output | 1 | M, M6, M7; 1310 series, 3.69" long, 1.25"-10T spline, includes item 145 (2847-P-640). | Call for availability | |
| 144 | A3897C2811 | Flange/Yoke-Front Output | 1 | N4; 1310 yoke, 3.38" long, 1.25"-10T spline, includes item 145 (2847-K-791). | Call for availability | |
| 144 | A3897D3072 | Flange/Yoke-Front Output | 1 | N7; Same as C-2811 except undercut versus radius on deflector seat, includes item 145 (2847-K-791). | Call for availability | |
| 145 | 2847P640 | Deflector-Front Output Yoke | 1 | M, M6, M7; Hook shape (cross section), 2.75" O.D., 1.76" I.D., 0.50" wide, included in item 144. | Call for availability | |
| 145 | 2847K791 | Deflector-Front Output Yoke | 1 | N4, N7; "S" shape (cross section), 2.75" O.D., 1.78" I.D., 0.50" wide, included in item 144. Part no longer available. | Call for availability | |
| 146 | S26122 | Capscrew-Front Brg. Cap | 3 | All; 0.38"-16, 1.50" long, grade 8. Replaces S-2611-1 which is 1.38" long. | $1.74 | Add to Cart |
| 147 | 1229K1597 | Washer-Front Brg. Cap | 3 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 147 | WA16 | Washer-Front Brg. Cap | 3 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 148 | A1805E447 | Oil Seal-Output Shaft Front | 1 | All; 2.50" O.D., 1.75" I.D., 0.77" wide, double seal lip and case, included in item 149. | $35.41 | Add to Cart |
| 149 | A33866U749 | Cap Assy.-Output Shaft Front | 1 | All; 3 holes on 3.75" bolt circle, open end, includes item 148. | Call for availability | |
| 150 | 2297Z6656 | Gasket-Output Shaft Front Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 151 | 1228V308 | Bearing-Output Shaft Front | 1 | All; Ball bearing, with snap ring, 2.83" O.D., 1.38" bore, 0.67" wide. | $18.02 | Add to Cart |
| 152 | 2847Q849 | Oil Catcher-Output Shaft | 1 | -; Not used on 221 models in this book. | No longer available - Call for replacement | |
| 153 | WA36 | Washer-Oil Catcher | 1 | -; Not used on 221 models in this book. | $120.45 | Add to Cart |
| 154 | K236 | Pin-Oil Catcher | 1 | -; Not used on 221 models in this book. | $124.00 | Add to Cart |
| 155 | 3880R746 | Shaft-Front Output | 1 | A1, M, M6 M7; 9.50" long, 3.34" from threaded end to 1.70" diameter. Replaces A-3880-R-746 which has snap ring and groove. | Call for availability | |
| 155 | 3880T1112 | Shaft-Front Output | 1 | All others; 9.69" long, 3.53" from 0.75"-16, threaded end to 1.75" diameter. | Call for availability | |
| 156 | 1854P146 | Snap Ring-Front Output Shaft | 1 | N4, N7; Fits over 1.75" diameter shaft. Part no longer available. | Call for availability | |
| 157 | 3892T1710 | Clutch-Front Output Sliding | 1 | All; 19T, spur, 2.57" O.D., 1.63"-10T spline, with shift groove. | Call for availability | |
| 158 | 3892S1709 | Gear-Front Output Shaft | 1 | All; 33T, L.H., Helical, 4.97" O.D., on shaft with 16T spline, 1.77" O.D. | Call for availability | |
| 159 | 1828F110 | Bearing-Front Output Shaft Rear | 1 | All; Ball bearing, with snap ring, 3.35" O.D., 1.77" I.D., 0.75" wide. | Call for availability | |
| 160 | A1205Z1768 | Oil Seal-Front Output Shaft Rear | 1 | A1; 2.88" O.D., 2.19" I.D., included in item 163. | Call for availability | |
| 160 | A1805E447 | Oil Seal-Front Output Shaft Rear | 1 | M, M6, M7; 2.50" O.D., 1.75" I.D., 0.77" wide, double seal lip, and case, with spring. | $35.41 | Add to Cart |
| 161 | 1844G501 | Spacer-Front Output Shaft | 1 | N4, N7; 2.13" O.D., 1.81" I.D., 1.38" wide. Part no longer available. | Call for availability | |
| 162 | 2297Z6656 | Gasket-Front Output Rear Cap | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 163 | A13866S747 | Cap Assy.-Front Output Shaft Rear | 1 | A1; 3866-H-1256 cast, internal brake mounting, 4 holes on 4.25" bolt circle, 4 threaded holes on 3.75" bolt circle, includes item 160 (A-1205-Z-1768). No longer available. | Call for availability | |
| 163 | 3866X752 | Cap Assy.-Front Output Shaft Rear | 1 | All others; 3866-E-317 cast, enclosed cap with 4 holes on 4.25" bolt circle. No longer avail. | Call for availability | |
| 164 | 1229K1597 | Washer-Front Output Shaft Rear | 4 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 164 | WA16 | Cap | 4 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 165 | S2682 | Capscrew-Front Output Shaft | 4 | A1, N4, N7; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart |
| 165 | S2691 | Rear Cap | 4 | All others; 0.38"-16, 1.12" long, grade 8. | Call for availability | |
| 166 | 4X840 | Stud-Rear Output Shaft | 1 | -; Not used on 221 model in this book. | Call for availability | |
| 167 | N161 | Nut-Rear Output Shaft | 1 | -; Not used on 221 model in this book. | No longer available - Call for replacement | |
| 168 | PW221 | Expansion Plug-Front Output Shaft | 1 | A1; 1.31" O.D., 0.08" thick. | Call for availability | |
| 169 | 3897F1332 | Hub-Brake | 1 | -; Not used on 221 model in this book. | $1,032.64 | Add to Cart |
| 170 | 1854P146 | Snap Ring-Brake Hub | 1 | A1, M, M6, M7; 1.63" assembled, 0.09" thick. Part no longer available. | Call for availability | |
| 171 | PW221 | Expansion Plug-Brake Hub | 1 | A1; 1.31" O.D., 0.08" thick. | Call for availability | |
| 188 | 3875B444 | Case-Transfer | 1 | A1; 3875-A-443 rough part, less interlock, A, D, E, and F mounting bosses. | Call for availability | |
| 188 | 3875W491 | Case-Transfer | 1 | M; 5875-L-506 rough part, with interlock, C, D, E, and F mounting bosses. | Call for availability | |
| 188 | 3875L558 | Case-Transfer | 1 | M6, M7; 5875-S-513 rough part, with interlock, B, E, and F mounting bosses. | Call for availability | |
| 188 | 3875M793 | Case-Transfer | 1 | N4, N7; 5875-L-792 rough part, with interlock, D (modified), E and F mounting bosses. | Call for availability | |
| 189 | 1199K1493 | Name Plate | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 190 | 9X16 | Screw-Name Plate | 2 | -; Not used on 221 models in this book. | $213.50 | Add to Cart |
| 191 | PW216 | Expansion Plug-Shift Shaft | 1 | All; 1.00" O.D., 0.08" thick. | Call for availability | |
| 192 | P24 | Plug-Oil Drain | 1 | N4, N7; Female, non-magnetic, 0.25"-18 thread. | $176.00 | Add to Cart |
| 193 | 1850X76 | Expansion Plug-Shift Shaft | 1 | All; 0.06" thick, 1.00" long. | Call for availability | |
| 194 | P112 | Plug-Oil Drain | 1 | All; Male, square head, 0.75"-14 thread. | $77.80 | Add to Cart |
| 195 | P112 | Plug-Oil Level | 1 | All; Male, square head, 0.75"-14 thread. | $77.80 | Add to Cart |
| 196 | 1898X856 | Oil Catcher-Input | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 197 | P112 | Plug-Oil High Level | 1 | -; Not used on 221 models in this book. | $77.80 | Add to Cart |
| 198 | 1898X258 | Elbow-High Oil Level | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 199 | P112 | Plug-Oil Level | 1 | -; Not used on 221 models in this book. | $77.80 | Add to Cart |
| 200 | A1205N1132 | Oil Seal-Shift Shaft | 1 | All; 1.25" O.D., 0.75" I.D., single lip and dirt lip. Replaces A-1805-S-305 with single lip only. | $41.40 | Add to Cart |
| 201 | A1205N1132 | Oil Seal-Shift Shaft | 1 | All; 1.25" O.D., 0.75" I.D., single lip and dirt lip. Replaces A-1805-S-305 with single lip only. | $41.40 | Add to Cart |
| 202 | 2849E239 | Shift Fork-Declutch | 1 | All; 2849-X-336 forging, 2.03" shift fork opening. | Call for availability | |
| 203 | LW166 | Lockwire-Shift Fork | 1 | All; 16 gage, 6.00" long. | $28.78 | Add to Cart |
| 204 | 26X54 | Lockscrew-Shift Fork | 1 | All; 0.38"-24, 1.16" long, square head. | $25.43 | Add to Cart |
| 205 | 2843A417 | Shift Shaft-Declutch | 1 | A1; 4.88" long. No longer available. | Call for availability | |
| 205 | 2843C419 | Shift Shaft-Declutch | 1 | All others; 5.06" long. No longer available. | Call for availability | |
| 206 | 2843Z416 | Shift Shaft-Hi-Low | 1 | A1; Setscrew hole 150 degrees left of vertical. No longer available. | Call for availability | |
| 206 | 2843B418 | Shift Shaft-Hi-Low | 1 | All others; Set screw hole 30 degrees right of vertical. No longer available. | Call for availability | |
| 207 | 2849E239 | Shift Fork-Hi-Low | 1 | All; 2849-X-336 forging, 2.03" shift fork opening. | Call for availability | |
| 208 | LW166 | Lockwire-Shift Fork | 1 | All; 16 gage, 6.00" long. | $28.78 | Add to Cart |
| 209 | 26X54 | Lockscrew-Shift Fork | 1 | All; 0.38"-24, 1.16" long, square head. | $25.43 | Add to Cart |
| 210 | 1229K1597 | Washer-Case And Top Cover | 10 | A1; 0.75" O.D., 0.41" I.D., 0.09" thick. | $135.00 | Add to Cart |
| 210 | WA16 | Washer-Case And Top Cover | 9 | All others; 0.67" O.D., 0.39" I.D., 0.09" thick. | $144.00 | Add to Cart |
| 211 | S2682 | Capscrew-Case And Top Cover | 9 | A1; 0.38"-16, 1.00" long, grade 8. | $159.00 | Add to Cart |
| 212 | A1199C1043 | Breather-Oil | 1 | All; 0.13"-27 N.P.T.F., 1.03" long. | $127.20 | Add to Cart |
| 213 | S26102 | Capscrew-Case Top Cover | 1 | -; 0.38"-16, 1.25" long, grade 8. | $178.00 | Add to Cart |
| 214 | 1846X284 | Dowel-T -Case And Cover | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 215 | 1846E265 | Pin-Brake Bellcrank | 1 | A1; 0.63" O.D., 1.66" long with 1 hole 0.16" diameter. | Call for availability | |
| 216 | 1898E57 | Ball-Shift Shaft Lock | 1 | All; 0.44" diameter ball. | Call for availability | |
| 217 | 2858A1 | Spring-Shift Shaft Lock | 1 | A1, M, M6, M7; 13 coils, 1.88" free length. | $1,042.00 | Add to Cart |
| 217 | 2858Q277 | Spring-Shift Shaft Lock | 1 | All others; 0.44" diameter, 1.52" free length. Part no longer available. | Call for availability | |
| 218 | 1898E57 | Ball-Shift Shaft Lock | 1 | All; 0.44" diameter. | Call for availability | |
| 219 | 2858A1 | Spring-Shift Shaft Lock | 1 | A1, M, M6, M7; 13 coils, 1.88" free length. | $1,042.00 | Add to Cart |
| 219 | 2858Q277 | Spring-Shift Shaft Lock | 1 | All others; 0.44" diameter, 1.52" free length. Part no longer available. | Call for availability | |
| 220 | 1845A27 | Pull Rod-Brake | 1 | A1; 1.65" diameter shaft, 0.10" thick. | Call for availability | |
| 221 | WA36 | Washer-Brake Pull Rod | 1 | A1; 0.81" O.D., 0.40" I.D., 0.06" thick. | $120.45 | Add to Cart |
| 222 | WA36 | Washer-Brake Pull Rod | 1 | A1; 0.81" O.D., 0.40" I.D., 0.06" thick. | $120.45 | Add to Cart |
| 223 | 302T540 | Bellcrank-Brake Operating | 1 | A1; 0.63" dia. ream, 0.38" thick. | Call for availability | |
| 224 | K248 | Cotter-Bellcrank Pin | 1 | A1; 0.13" diameter, 1.00" long. | $387.00 | Add to Cart |
| 225 | WA310 | Washer-Bellcrank Pin | 1 | A1; 1.31" O.D., 0.66" I.D., 0.10" thick. | $185.00 | Add to Cart |
| 226 | K236 | Cotter-Brake Pull Rod | 1 | A1; 0.10" diameter, 0.75" long. | $124.00 | Add to Cart |
| 227 | K236 | Cotter-Brake Pull Rod | 1 | A1; 0.10" diameter, 0.75" long. | $124.00 | Add to Cart |
| 228 | 2297Z6656 | Gasket-Cover | All; Silicone gasket, use as required.* | $104.20 | Add to Cart | |
| 229 | A3855G267 | Cover Assy.-T -Case Top | 1 | A1; No cast bosses on underside. Part no longer available. | Call for availability | |
| 229 | 3855X258 | Cover Assy.-T -Case Top | 1 | All others; 3855-L-506 cast, breather hole in center and 2 cast interlock bosses on underside. | Call for availability | |
| 230 ITEM | 1846H268 | Shaft-Shift Interlock Part Name | M, M6, M7, N4, N7 MODEL; 0.38" diameter, 6.16" long. DESCRIPTION | Call for availability | ||
| 172 | 2297Z6656 | Gasket-Brake Oil Deflector | -; Not used on 221 models in this book. | $104.20 | Add to Cart | |
| 173 | 2847S617 | Oil Deflector-Brake | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 174 | 1829Z754 | Washer-Brake Oil Deflector | 1 | -; Not used on 221 models in this book. | Call for availability | |
| 175 | A3736R200 | Backing Plate Assy. | 1 | A1; 7.25" x 1.50" DLM, 0.40" diameter-4 holes on 3.70" bolt circle. | Call for availability | |
| 176 | 1229E1513 | Washer-Brake Mtg. Capscrew | 4 | -; Not used on 221 models in this book. | $174.00 | Add to Cart |
| 177 | S2662 | Capscrew-Brake Mounting | 4 | A1; 0.38"-16, 0.75" long, grade 8. | $102.00 | Add to Cart |
| 178 | 372D134 | Lever-Brake | 1 | A1; 372-K-89 stamping, 0.38" diameter. | Call for availability | |
| 179 | 1779P94 | Roller-Brake | 2 | A1; 0.75" O.D., 0.44" I.D., 0.25" thick. | No longer available - Call for replacement | |
| 180 | 2258Q719 | Spring-Brake Shoe Return | 2 | A1; Tension spring, 0.50" O.D., 12 coils 2.63" length at 20 lb. load. Part no longer available. | $7.03 | Add to Cart |
| 181 182 183 | A133722T202 | Brake Shoe And Lining Assy. Rivet-Lining To Shoe Lining-Brake Shoe | A1 - -; Includes lining. Not used on 221 models in this book. Not sold separately, bonded lining. | Call for availability | ||
| 184 | 3719F58 | Drum-Brake | 1 | A1; 2.50" pilot diameter, 0.38" diameter- 4 holes on 3.13" bolt circle. | Call for availability | |
| 185 | 1229E1513 | Washer-Brake Drum Capscrew | 4 | -; Not used on 221 models in this book. | $174.00 | Add to Cart |
| 186 | LW1610 | Lockwire-Brake Drum Capscrew | 1 | A1; 16 gage, 10" long. | Call for availability | |
| 187 | 10X1254 | Capscrew-Brake Drum | 4 | A1; 0.38"-16, 0.75" long, with drilled hole, grade 8. | Call for availability |
This is the complete factory parts breakdown for the Meritor T-221 / T-223 Transfer Case, with every part in the manual matched to our live inventory. We stock 319 of the 777 parts above; click any part number to view it, or add it straight to your cart.
No parts match that search. Try the part number with no dashes.