The Chelsea 210 Series Power Take-Off, part number 210GMMFP-B421 or 210GMMFPB421, is a hydraulic-shift PTO engineered specifically for the Ford 10R140 TorqShift 10-speed automatic transmission using a Ford 10-bolt mounting pattern. The 210 Series carries an intermittent torque rating of up to 235 lb-ft and uses a 46-tooth spur input gear with a gear ratio of 46/36, delivering 144% output speed relative to input. The MF input gear designator and internal lubrication (P designation) are built into this configuration. Output shaft options in the 210 Series include 1-1/4" keyed, 3/4" 11-tooth SAE A pilot, and 7/8" 13-tooth SAE A pilot. The integrated cartridge valve and pressure switch simplify installation to a single hose connection. Chelsea's patented noise-suppression system and Electronic Overspeed Control are hallmarks of this series. Available for 2WD and 4WD applications. Call us to confirm proper fit for your truck and pump combination.
Features
Chelsea 210 Series PTO for Ford 10R140 TorqShift 10-speed automatic transmission
Hydraulic shift with Ford 10-bolt mounting pattern
Intermittent torque rating: up to 235 lb-ft (319 Nm)
Gear ratio 46/36, delivering 144% output speed; 46-tooth spur input gear
Internal lubrication; single hose connection with integrated cartridge valve and pressure switch
Patented noise-suppression system with Electronic Overspeed Control (EOC); available for 2WD and 4WD
Tech Specs
- Series: Chelsea 210
- Application: Ford 10R140 TorqShift 10-speed automatic transmission
- Mounting Type: Ford 10-bolt
- Shift Type: Hydraulic
- Intermittent Torque: up to 235 lb-ft (up to 319 Nm)
- Continuous Operation: No
- Gear Ratio: 46/36 (144% output speed)
- Input Gear Designator: MF - 46-tooth spur
- Lubrication: Internal (P designator)
- Output Shaft Options: 1-1/4" keyed, 3/4" 11-tooth SAE A pilot, 7/8" 13-tooth SAE A pilot
- Drive Compatibility: 2WD and 4WD
Additional Information
The Chelsea 210 Series is designed for work truck applications including tow and recovery, service trucks, small dump trucks, fire and rescue, aerial, and water drilling equipment. The series pairs with a wide selection of pump sizes to match required flow rates and pressures. Parker Chelsea documents available for this series include the 210/810 Series Owner's Manual, 210 Series Parts List, and 210 Series Sales Literature. Part number 210GMMFP-B421 is also referenced as SP210GMMFP-B421. Not sure this is your part? Give us a call.Parts Manual: Chelsea 210 Series PTO Parts Manual (PDF) — exploded views, item numbers and the full parts breakdown for this series.
