Features
6-bolt mounting configuration with rotatable flanges for flexible installation
1-1/4" round output shaft with 5/16" keyway
Pneumatic or PowerShift (pneumatic/hydraulic) shift with integral air control valve
Continuous torque rating up to 300 lb-ft (407 Nm); intermittent rating 201-300 lb-ft (401-500 Nm)
Shaft output of 29 HP at 500 RPM, 57 HP at 1,000 RPM
Compatible with Ford, Allison, Eaton/Fuller, Aisin, Volvo/Mack, and RAM transmissions
Tech Specs
- Intermittent Torque: 201-300 lb-ft (401-500 Nm)
- Continuous Torque: Up to 300 lb-ft (407 Nm) - Check Application Pages for Actual Torque Ratings
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" Round with 5/16" Key
- Shift Type: Pneumatic, PowerShift (Pneumatic/Hydraulic)
- Output Power: 56+ HP (41-50 kW)
- Shaft Power at 500 RPM: 29 HP (21 kW)
- Shaft Power at 1,000 RPM: 57 HP (43 kW)
- Transmission Compatibility: Ford, Allison, Eaton/Fuller, Aisin, Volvo/Mack, RAM, Other
Additional Information
The Chelsea 272 Series consolidates the earlier 230, 231, 236, 238, 270, and 271 PTO lines into a single medium-duty hot-shift platform. The series offers nine speed ratios and eighteen shift options. Direct-mount outputs are available with optional Wet-Spline technology for extended PTO and pump shaft service life. Driveshaft output configurations include the Smart-Start option, designed for high-torque start-up conditions where shock loads are a concern. Typical market applications for the 272 Series include towing and recovery, aerial work platforms, construction equipment, and water trucks. Part number 272XKAJX-V3RB is also referenced as SP272XKAJX-V3RB. Call Pro Gear and Transmission to verify the correct configuration for your specific transmission and duty cycle.Parts manual and diagrams: Chelsea 272 Series PTO parts list with prices
Matched by full model number. Check the mounting, input gear and output against the unit you are replacing before you order. Look up any Chelsea, Muncie or Bezares number on our Muncie to Chelsea PTO cross reference.

