 |
 |
 |
|
The Eaton Detroit Locker differential install kit K-GM7.5-99 (also listed as KGM7599) is designed for the GM 7.5 in. rear axle. The kit covers a 30-spline axle and a 27-spline pinion, with a 10-bolt ring gear in standard rotation. Timken-branded carrier, tail, and head bearings are included. Carrier shims, pinion shims, a pinion seal, crush sleeve, pinion nut, ring gear bolts, cover gasket, thread locking compound, and gear marking compound are all part of the package. Cross-reference numbers for this application: Ford/Eaton 162C59A, 912A317, and 19599-010. Note that axle bearings and axle seals are not included in this kit. Call us to confirm proper fit for your application.
- Axle Description: GM 7.5 in.
- Axle Location: Rear
- Axle Spline Count: 30
- Pinion Spline Count: 27
- Ring Gear Bolts: 10
- Ring Gear Rotation: Standard
- Cover Bolts: 10
- Bearing Brand: Timken
- Carrier Bearings Included: Yes
- Head Bearing Included: Yes
- Tail Bearing Included: Yes
- Axle Bearings Included: No
- Carrier Shims Included: Yes
- Pinion Shims Included: Yes
- Pinion Seal Included: Yes
- Crush Sleeve Included: Yes
- Pinion Nut Included: Yes
- Ring Gear Bolts Included: Yes
- Cover Gasket Included: Yes
- Thread Locking Compound Included: Yes
- Gear Marking Compound Included: Yes
- RTV Gasket Maker Included: No
- Axle Seals Included: No
- Cross-Reference (Ford/Eaton): 162C59A, 912A317, 19599-010
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- GM 7.5 in. rear axle application, 30 axle splines, 27 pinion splines
- Timken carrier bearings, tail bearing, and head bearing included
- 10-bolt ring gear with standard rotation; ring gear bolts included
- Carrier shims and pinion shims included for precise setup
- Pinion seal, crush sleeve, pinion nut, cover gasket, and thread locking compound included
- Cross-references Ford/Eaton part numbers 162C59A, 912A317, and 19599-010
|
|
|
|
|
|
|
