 |
 |
 |
 |
The Chelsea 221XEAHX-W6XD or 221XEAHXW6XD is a 6-bolt Power Take-Off assembly from the Chelsea 221 Series, designed for low-speed, heavy-duty applications including dump trucks, tow and recovery, and aerial equipment. Shift type is wire/cable mechanical. The 1-1/4" round output shaft (with key) pairs with transmissions from Allison, Eaton/Fuller, Volvo/Mack, Hino, and other manufacturers. Shaft power is rated at 24 HP (500 RPM) and 48 HP (1,000 RPM). Intermittent torque is 250 lb-ft (check application pages for actual ratings). The cast iron housing is available in standard or low-profile configuration. Greaseable pump shafts reduce spline fretting and corrosion over time. Call us to confirm proper fit for your application.
- Intermittent Torque: 250 lb-ft / 339 Nm (check application pages for actual torque ratings)
- Shift Type: Wire/Cable, Mechanical
- Output Power: 46-55 HP / 31-40 kW
- Shaft Power: 24 HP at 500 RPM, 48 HP at 1,000 RPM (18 kW at 500 RPM, 36 kW at 1,000 RPM)
- Output Shaft Type: 1-1/4" Round with Key
- Mounting Type: 6-Bolt
- Transmission Compatibility: Allison, Eaton/Fuller, Volvo/Mack, Hino, Other
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 6-Bolt mounting type for direct transmission attachment
- Wire/cable mechanical shift operation
- 1-1/4" round output shaft with key
- Intermittent torque up to 250 lb-ft (339 Nm); verify rating on application pages
- Shaft power: 24 HP at 500 RPM, 48 HP at 1,000 RPM
- Greaseable pump shafts to reduce spline fretting and corrosion
- Available in standard or low-profile housing configuration
|
|
 |
 |
 |
 |

|