 |
 |
 |
 |
The Chelsea 221XCAJX-W5XD or 221XCAJXW5XD is a 6-bolt Power Take-Off assembly from the Chelsea 221 Series, designed for low-speed, heavy-duty service on dump trucks, tow and recovery vehicles, aerial equipment, and vocational trucks. It uses a wire/cable mechanical shift and delivers up to 250 lb-ft (339 Nm) intermittent torque, with shaft power of 24 HP at 500 RPM and 48 HP at 1000 RPM. The 1-1/4" round output shaft with keyway fits a range of pump configurations. Compatible with Allison, Eaton/Fuller, Hino, and Volvo/Mack transmissions. The cast iron housing carries tapered cone output bearings for load capacity beyond what needle bearings provide, and pump shafts are greaseable to limit spline fretting and corrosion. A genuine Chelsea part from Pro Gear and Transmission. Call us to confirm proper fit for your application.
- Intermittent Torque: 250 lb-ft / 339 Nm (check application pages for actual rating)
- Shift Type: Wire/Cable, Mechanical
- Mounting Type: 6-Bolt
- Output Shaft Type: 1-1/4" Round with keyway
- Transmission Compatibility: Allison, Eaton/Fuller, Hino, Volvo/Mack
- Output Power: 46-55 HP / 31-40 kW
- Shaft Power: 24 HP (500 RPM), 48 HP (1000 RPM) / 18 kW (500 RPM), 36 kW (1000 RPM)
- Continuous Operation: Yes, with 30% de-rating
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 6-bolt mounting compatible with Allison, Eaton/Fuller, Hino, and Volvo/Mack transmissions
- Wire/cable mechanical shift type
- 1-1/4" round output shaft with keyway
- Intermittent torque rating up to 250 lb-ft (339 Nm); verify actual rating on application pages
- Shaft power: 24 HP at 500 RPM, 48 HP at 1000 RPM
- Greaseable pump shafts to reduce spline fretting and corrosion
- Cast iron housing with tapered cone output bearings for heavy load capacity
|
|
 |
 |
 |
 |

|